twin keel aluminum sailboat

Yachting Monthly

• Digital edition

Why twin keels are making a comeback

• Theo Stocker
• March 20, 2019

French boat builders are leading the way with versatile new twin keel boats. Theo Stocker went to discover the appeal and how to dry out in style

There are a significant number of sailors who prefer boats that can take the ground

Bilge keels can be a divisive topic. While it might seem like the majority of new boat buyers are in favour of fin keels, there is a significant undercurrent of sailors who prefer boats that can take the ground.

While fin keels offer a deeper centre of gravity, marginally less drag and more lateral resistance, making them theoretically better at sailing to windward, they are a relatively recent development and it’s not long since all yachts were long-keeled and could comfortably dry out on legs or alongside a harbour wall.

In the tidal waters of the UK, where drying harbours and half-tide creeks abound, the ability to dry out can vastly increase both your potential cruising grounds, and the cost and location of your home berth.

There are a wealth of shallow draft cruisers available on the second-hand market today.

Moody, Westerly and Hunter all produced enormously popular bilge keel models, while Southerly, Parker, Feeling, Ovni and Allures have been making lift keel and swing keel yachts for years.

Drying out opens up new cruising grounds

Latterly, it is the French centre-board yachts that have proved most popular for the adventurous sailor keen to get off the beaten track. That may explain why bilge keels have rather waned.

There are some new kids on the block, however, that are reinvigorating the concept.

Most notably, La Rochelle-based RM yachts offer a range of epoxy-infused plywood boats that can take the ground between their two keels and a weight-bearing rudder.

Hot on the heels of these French class leaders are Brittany yard Marée Haute and their Django brand, which produces lightweight GRP pocket cruisers from six metres up to 12 metres.

While they offer deep fin and lift keel options, it is their twin keeled versions that are currently proving most popular. So where better than Brittany to go for a test sail?

We went along to try drying out in the latest incarnation of these new and interesting twin keel cruisers.

BILGE KEEL OR TWIN KEELS?

There have been many design variations that come broadly under the term bilge keels. Strictly speaking, bilge keels are in addition to a long central keel, fitted near the bilge, where the hull turns from the bottom to the side of the boat.

Traditionally, these were non-structural, shallow and long, largely intended to reduce rolling. Twin keels, in contrast, replace the central keel entirely and the boat is structurally adapted to make these the main ballast-bearing hull appendages.

Some early twin keel moldings simply added two shallow-draught keels either side of the centreline, at right angles to the waterline and parallel to the centreline, but these boats often tended to sag to leeward when sailing upwind, and sometimes lacked the proper hull reinforcement at the attachment points.

More modern twin keels tend to be much better hydrodynamically aligned and, some argue, provide at least as much lateral resistance as a single keel, though in theory, more drag.

A boat with two keels will tend to be heavier because of the additional reinforcement needed to bear the loads of the ballast and of drying out, and will usually have a higher centre of gravity because of their reduced draught. Again, modern construction, narrow-chord keels and ballast bulbs all help to reduce these effects.

1 FINDING A SPOT

The art of drying out is all about finding the right spot to take the bottom. In an ideal world, you would find somewhere that is totally sheltered.

Luckily, when drying out you can tuck in much further than you normally would, but you don’t want any swell coming through that will lift the boat and drop her on her keels in the crucial moments that she is settling down, or refloating as the tide returns.

Most twin keelers will be designed to withstand some wave action on the keels, but you don’t want to push it. You then need to find an area of seabed that’s as level as possible. Despite the fact that you are suspending the boat’s weight at over a metre’s height, the wide set keels ensure she is very stable, so unless you are on rocks, you should be fine.

Finding a sheltered anchorage without too much swell is vital when drying out. Credit: Alamy

The type of bottom makes a difference too. Rocks will tend to be uneven and could damage the keels, although smaller stones won’t be a problem.

Gravel, sand or mud are ideal and will normally be pretty level. Hard sand is the ideal as you will then be able to walk to and from your boat with ease at low tide, but it’s worth having a pair of wellies on board for the inevitable muddy puddles that will be left as the water recedes.

Before you decide to dry out, it’s crucial to plan ahead. You might have enough water to get in on this tide, but you don’t want to get neaped if the tides are dropping off.

Similarly, have a look at the forecast. If the wind is forecast to change while you are dried out, check that the anchorage will remain protected.

Don’t forget to note the barometric pressure and general wind direction, which can have a significant impact on the predicted tidal heights.

While charts will help, local knowledge is king. Almanacs and pilot books will give useful advice for where to go, but ask other sailors too.

Locals may well know little spots that are well and truly off the beaten track.

2 ANCHORING

Once you have chosen where to dry out, you will need to anchor. If you are in an open bay with plenty of space, a single bow anchor will be fine.

It’s an odd feeling waiting for your yacht to go aground

If it is important which way you are facing when you dry out, however, such as on a sloping beach, in a narrow river, or if there are other boats around, you will need to lay both a bow and a stern anchor to control your position.

In drying harbours, there may already be moorings, often fore-and-aft, to stop the boat from swinging.

3 PREPARING THE BOAT

Fit any legs or transom support

You may need to rig extra gear to keep the boat upright. Some fin keel and lift keel boats will have drying-out legs.

Bilge keelers with reasonably long keels fore and aft will be stable enough fore and aft with no additional gear, but more modern twin-keelers often aim to create a tripod, between keels and a weight-bearing rudder or an additional leg.

The Django 770 has an adjustable transom leg. While this is weight-bearing it’s more of a stabiliser and should be set slightly short in a swell.

4 DRYING OUT

If you are in a place you are familiar with and have dried out in before, you should be safe to anchor or moor the boat securely and head ashore while the tide goes out.

If you are somewhere new, however, it is worth staying with the boat for the critical period that the keels are taking the bottom until the boat is securely aground.

It is worth staying on your yacht while it is drying out if you are stopping somewhere unfamiliar

This is particularly true if your boat has drying out legs, as the relatively small surface area of the leg could end up on a rock or a soft spot, and will need adjusting and tensioning to keep their boat comfortably upright.

5 HIGH AND DRY

If you are lucky, you will be able to walk ashore at low tide without getting your feet wet. If you are going ashore for a while, make sure you check the tides — you may need to carry the tender to the high-water mark if you don’t want to swim back.

It is a good chance to check your hull fittings

In most places, a pair of wellies will help when walking through mud, or over rocks. You may need to lower the bathing ladder to climb down from the boat, and to get back on when the tide is out.

Fabio Muzzolini is the sales director for Marée Haute, the Breton builders of the Django range of twin-keeled yachts

If you’re in a narrow river, low water is a good opportunity to have a look at exactly where the channel goes.

The boat will be very stable once dried out, but be careful about putting too much weight on the bow — it’s probably a good idea not to have more than one person on the bow when dried out.

A couple of buckets will also come in very handy.

Fill one of them up before you lose the water so you can wash your feet once you’ve walked back across the sand or mud.

The other bucket is for calls of nature, as you won’t be able to flush the heads.

6 REFLOATING

Afloat again and ready to sail

Waiting for the tide to return is the easy part, if all crew are back aboard.

As soon as the boat is floating, remove any drying-out legs or supports — these are remarkably easy to forget, but could cause real damage if left down.

Don’t forget to lift the bathing ladder too.

Retrieve your stern anchor first (you can do this when the tide is out if the conditions are right) and then weigh the bow anchor and you’re off.

Enjoyed reading this?

A subscription to Yachting Monthly magazine costs around 40% less than the cover price .

Print and digital editions are available through Magazines Direct – where you can also find the latest deals .

YM is packed with information to help you get the most from your time on the water.

• Take your seamanship to the next level with tips, advice and skills from our experts
• Impartial in-depth reviews of the latest yachts and equipment
• Cruising guides to help you reach those dream destinations

Follow us on Facebook , Twitter and Instagram.

• Sell a boat

Aluminium sailboats

Aluminum offers an excellent safety / longevity / price / performance ratio. These qualities make it the favorite material of many long trips sailors. The boat holding the world record for the single-handed world tour “the wrong way”, (against the prevailing winds and currents) is an aluminum monohull which finished in 2004 the itinerary Ouessant / Antarctic / Ouessant in 122 days 14 hours 3 minutes and 49 seconds skipped by Jean-Luc Van den Heede. A reference!

You will find here our selection of aluminum sailboats.

AYC, the choice of seamen

• Grand Soleil
• Long trips yacht
• Used powerboat
• Cruise catamaran
• Aluminium sailboat
• Fast cruiser
• Aluminium centerboarder sailboat
• Steel centerboarder sailboat
• Ocean racer
• Motor Yacht
• Wooden sailboat

Be Bold. Be Antifragile.

Don't miss another video, subscribe to our channel

Alubat [al.u.bat] noun | Aluminium Bateau | Aluminum Boat

Open House at Alubat

Join us at the Alubat boatyard in Les Sables d’Olonne, France for our Open House this coming May 31 to June 1 and get on board a new OVNI 370 and OVNI 430.

Amazing 43-ft Aluminum Sailboat

Full-time cruisers Roberta and Duca stopped by to visit us during the La Rochelle Boat Show for a tour of the NEW Ovni 430.

The ‘Small’ Huge Sailboat

Tour of the new Ovni 370 with Duca and Roberta on their YouTube channel Odd Life Crafting.

Aluminum Sailboat Misconceptions

“I have a friend, who knows a guy, who has a cousin, that bought an aluminum boat, and after a week in the marina the bottom fell out of her”.

Alubat Pricing

How Much Does a Well-Equipped Alubat Ovni Cost? Find out how we price the Ovni range of aluminum sailboats for the serious off-shore cruiser.

OVNI 490 Preview

The 490 shares some of the hallmarks of the Ovni range: shaft drive, full sailplan, centerboard, and spacious interior with a raised salon layout.

50 years of sailing excellence!

FIGARO nautisme | by François Tregouet

Half a century old and still thriving, Alubat, the Vendée-based shipyard, is not content with just being one of the world’s benchmarks in ocean cruising with its iconic Ovni yachts. Instead, with the enthusiasm of youth, it is preparing to launch three new monohulls over the next two years.

Link to read article [PDF]

STRENGTH ACROSS THE FULL RANGE OF ALUBAT Aluminum SAILBOATS

The new generation OVNI 370 with an inverted bow for improved performance and expanded the interior volume.

The new generation OVNI 430 with an inverted bow for improved performance and expanded the interior volume.

What sets the OVNI 490 apart are the protected pilot house and twin engines. 

The OVNI 450 stands out from the OVNI range and maintains a traditional cabin top styling.

Designing and building aluminum boats for blue water sailing. ​

The  Alubat shipyard  has been designing and building aluminum boats for blue water sailing since 1973. With more than 1,600 yachts built and with 50 years of expertise in metal work and carpentry, Alubat has unparalleled experience in the aluminum sailboat market.

Discover More

Aluminum is green

By having the ability to beach your boat, inspecting and servicing your yacht becomes less daunting than having to haul out.

beach your boat

Go places where other sailboats can't.

Centerboard advantages, navigate shallow water.

From the turquoise waters of the Bahamas to the Alaskan ice fields, a lifting keel gives you the peace of mind to navigate in shallow water. 

The centerboard doesn’t sacrifice performance or safety, in fact, it can enhance performance when it comes to downwind sailing. 

Another advantage of a centerboard is the expanded possibilities to find docking in marinas that would otherwise be too shallow for a fixed keel sailboat.

Without the limitations of fixed keel boats, your cruising opportunities can take you through the maze of Europe’s ancient canals and the historic North American waterways.

The centerboard can be lifted manually or by using a hydraulic system.

traverse canals

Owners sharing experiences from around the world.

CIGALE 15 QR

ALUBAT AMERICA

ALUBAT SHIPYARD

TRAVEL BOOKS

@ 2024 Alubat America. All rights reserved.

Aluminium Strongall Specialist – Sailing and motor yachts

Located in Tarare since 1963, META is the manufacturer of Bernard Moitessier's historical JOSHUA. Thanks to the Strongall ® assembly process, patented by the shipyard in 1977, and its unique know-how the shipyard designs and builds sailboats, trawlers, speedboats and other floating buildings using the deck hull prestressed aluminum technique: our constructions are efficient, innovative, comfortable and very resistant.

The History of the Site

It is in Chauffailles, in Saône et Loire, that Jean Fricaud, an enlightened self-taught metallurgist, takes advantage of his workshops to build his first 11m steel motor-sailer: the SAINTE MARTHE. At the age of 13, Joseph, the eldest son, dreams of cars, drawing and mechanics... and of leaving school as soon as possible in order to start an apprenticeship-which he will do, with his father's blessing.

The workshops, in full effervescence, set up a construction line for hydraulic shovels, Joseph finished his apprenticeship as a mechanic in Lyon and left to enrich his technical knowledge in various regional boiler making workshops hoping, as soon as possible, to practice metallurgy on his own account.

Still in Chauffailles, Jean Fricaud is approached by Bernard Moitessier, for whom he agrees, as a good patron, to build the steel hull of JOSHUA. At the same time, Joseph set up under the name META and became a subcontractor for his father's excavator company.

Jean Fricaud, in Chauffailles, has exhausted all the possibilities for expanding his hydraulic excavator construction company and sets up an additional workshop in Tarare, on the RN7, near Lyon. META, still in Chauffailles, began to diversify and expanded its range of construction equipment.

Jean Fricaud seized the opportunity of a lifetime and sold his prosperous business to an industrial group: he had just built the motorboat NADINE and could finally devote himself to deep-sea fishing. But the buyer does not want to expand to Tarare, where the workshop has just been completed. Sensing "the emergence of a market", Jean proposed to his son to build steel boats there. Joseph obeyed and fate precipitated events: thanks to the publicity generated by Bernard Moitessier's exploits, META became a full-fledged shipyard in Tarare.

After having built more than 70 JOSHUAS, more than 30 DAMIENS II, and many other steel hulls, Joseph launches a big paving stone in the pond and abandons steel in favor of STRONGALL® aluminum, which he has just patented. His pre-stressed aluminum construction technique makes it possible to create extremely resistant deck hulls. The young subsidiary PROMETA, directed by François Fevre, also abandons steel for STRONGALL®.

Patrice Passinge is 17 years old when he joins META as a metal worker, under the supervision of André Ravatier, the company's workshop manager. Joseph carefully follows Patrice's efforts, and despite his young age, he soon proves to be an outstanding journeyman.

Patrice Passinge became workshop manager when, after his excellent career at META, André Ravatier took his legitimate retirement. At the end of the 90's, aware that Joseph was getting older, various buyers came forward with the objective of expanding the company. But Joseph wanted to preserve the family spirit of the company and decided to pass on META to Patrice, who had a solid background and an excellent culture of the business.

Joseph definitively transfers the META Chantier Naval Spécialiste du STRONGALL® brand and all its activities to Patrice Passinge.

Construction and launch of FLEUR AUSTRALE, the magnificent custom sailing boat designed for and by Philippe Poupon. This large expedition ketch travels in all the waters of the world in complete safety, from the Arctic to the Antarctic via the Pacific Ocean.

Design and construction of the Ecotroll 39 in partnership with Jean-Pierre Brouns and the Olbia shipyard. The smallest troller approved for ocean navigation, it sailed from Lyon to Greenland through canals and oceans before returning to Lyon via the Canal du Midi in spring 2011.

50 years of META Shipyard on the island of Frioul opposite Marseille. Great meeting with many clients and personalities owning META yachts.

META is diversifying by proposing hulls for various floating projects, such as the development of a floating restaurant (entre deux ô) visible on Roanne.

Based on our floating projects, Dominique Renouf called on META to build Solar Carriage. Real floating habitats with electric propulsion, the Solar Carriage are powered by photovoltaic panels and can navigate on canals and rivers in an ecological way, an important value of our company. In parallel, META is working on its first production boat, the META 36.

Thursday March 12, a few hours before the first presidential address concerning the containment due to COVID-19, Philippe Brabetz signs the takeover of META Chantier Naval Specialist of the STRONGALL®. Patrice Passinge will launch a carpentry workshop dedicated to the interior fittings of the META 36, at the Tarare location.

The takeover is final and the shipyard, renamed META Yachts—Architect Shipyard—Strongall® Specialist, resists to the COVID wave and follows its course. Philippe conceides his TurboKeels® patent to the company and initiates a range of innovative designs for modern, attractive and highly performing sailboats, new motorboats. META Yachts confirms the desire to invest in environmentally clean projects such as electro-solar housing barge carried by Dominique Renouf, and gorgeous Noé boat, carried by Nicolas Lallemand.

Inauguration de META Yachts Services, à Port Saint Louis du Rhône, sur la côte méditerranéenne, cofondée par Philippe Brabetz et Fréderic Switala, pour l'entretien, le gardiennage et la vente de bateaux META Yachts d'occasion.

Technical Legacy

Bernard moitessier, writer of great talent, exceptional sailor and philosopher recognized well beyond our borders, bernard moitessier (1925 – 1994) has become a legend..

He has given rise to strong vocations by communicating his precious philosophy to all those who, in love with freedom, have “taken the plunge” and are blossoming far from our agitated lands. Everything or almost everything… has been said and written about Bernard, a very unusual character. “I am weighing these words because I fear that his formidable genius of simplicity has escaped some people and has disappeared into the oblivion of history, which would be unjust and regrettable. More than any other sailor, Bernard was haunted not only by the obligation of robustness of the boat, but also by maintenance, hence maximum simplicity. In this perfect sailor’s logic, the deck of JOSHUA – by its very studied simplicity – has always constituted, in my eyes, an essential work reference. Today, every builder (amateur or professional) should be inspired by the best of this masterpiece of practical common sense, on aluminum as on steel.

Drastically simple, but with minimum solutions that have been carefully thought through… On the JOSHUA bridge, nothing should catch, nothing should hurt, nothing should jam: no rails or screwed parts, but welding of sturdy rings instead (to make it easier to surf with the brush, to keep everything clean, and to do away with protective adhesives! Moreover, the most economical solutions were the order of the day, because Bernard was really not rich when Jean, my father, built for him in 1961, the hull number 1 of JOSHUA in CHAUFFAILLES. Among the original features of this deck plan – of a monarchal rigor – the famous “Chinese hood” for example, is worth the detour: 100% watertight thanks to its judicious volumes of depression in spite of the absence of flexible joint, inviolable, reducing thermal bridges, it divides by 3 the times of painting on its perimeter while maintaining the aspect of the new: who does better?

I was very young in the trade when my small team of journeymen started the construction of the JOSHUAS in TARARE, and Bernard’s sponsorship was a great help to me!

More than forty years separate us today from the launching of Bernard’s hull in LYON, and the spirit of the master is still deeply rooted in our reflexes – everything that could be tried differently often turned out to be less convincing, so thank you Bernard for your intelligent contribution to the design of the metal decks of our sailing ships.

Joseph FRICAUD

, Founder of META Chantier Naval

Our Strongall ® construction technique

There is no such thing as the a universal or perfect material, and here is why we have chosen aluminum to replace steel:.

• Aluminum boats are solid: constructions are homogeneous, without joints between welded elements and without weaknesses caused by composite associations of various materials
• Aluminum boats have a great longevity, are a good investment when budgets are under control and if they’ve been well designed and especially well built, they maintain a good rating when resold
• Aluminum grades 5083 and 5086 require little maintenance

Why Strongall ® ?

This aluminum construction method was developed and patented by META Chantier Naval in 1977. The concept is that of a self-supporting aluminum deck hull, based on the use of thick sheets: the transverse structure is then reduced to a minimum (integrated tanks, engine cradle, mast belt, crash-box or watertight bulkhead) depending on the size of the boat. This type of construction is synonymous to robustness and longevity, warrants of the significant investment a boat represents over the years.

The Advantages of Strongall ® :

• Stronger than equal weight steel construction
• About 30% lighter than the same steel shell with comparable strength
• The use of thick sheets allows a greater intensity in welding thus eliminating the risk of “sticking”, and guarantees a better fusion of the metal
• Little or no deformation of the plating sheets
• The thickness of the sheets increases the resistance to corrosion and significantly reduces the risk of metal fatigue (repeated cycles of torsion-bending of the planks where the hull is a hollow beam moving on complex waves and swell phenomena)
• The hull is treated with inorganic Zinc Silicate
• The painting of the dead works and the bridge is only necessary for cosmetic reasons, they can remain raw without consequence for the material.
• A significant advantage for the shipowner, the absence of internal restrictive structures makes the design of the fittings more flexible.

Architectural constraint:

The hulls require developable hull surfaces and lively chine(s)—easily integrated in elegant and efficient designs!

Over 300 sailboats, motorboats and trollers have been built in Tarare since 1977, their extreme robustness secures navigation in particularly difficult areas: Arctic, Northwest Passage, Antarctica… COME MEET US IN TARARE, AND GET A FEELING OF WHAT WE REALLY DO!

TurboKeels®

A solution for ballasting lead from one side to the other….

To displace the center of gravity without relying on complex tilting keels, Philippe Brabetz, new owner of the Meta shipyard, has come up with an ingenious solution: TurboKeels®, or how to ballast lead from one keel to another!

Already used on tilting keel sailboats such as IMOCAs, the system literally involves shifting the center of gravity of the boat—but a tilting keel requires a large draft and a complex, expensive and above all fragile mechanism not suitable for cruising yachts.

With TurboKeels®, Philippe Brabetz applies the above basic premise to twin keel boats. The 2 keels are then used as reservoirs to accommodate the ballast which travels from one keel to the other as needed, and following a closed circuit mechanism activated by a simple pump.

The advantages of Turbokeels are:

• Enhances power
• Diminishes heel angle
• Allows for shallow draft
• Simple, reliable and economical

Stronglite®

—The Stronglite ® technique is undergoing scrutiny by our R&D team—

you can stay tuned and follow our social media networks

Philippe Brabetz

Owner & CEO

Nathalie Simon

Administration & Sales

Marin Ducoux

Design Office Manager

Serge Calka

Export & Communication

Dockyard Technical advisor

Aluminum Ship Builder

Naval Engineer

Philippe Brabetz has an architecture degree from the Paris-La-Villette School of Architecture. While studying to become a building specialist, he attends Dominique Presle’s naval architecture courses and becomes passionate about the subject.

He graduates shortly after the first Gulf War, when jobs were hard to come round, and nevertheless manages to join the Guignols’ team at Canal+, working at the design and production of TV sets and special effects as of 1995. Ten years later, still passionate about shipbuilding, he joins the Nantes Naval Architecture DPEA which he tops by an internship for the construction of America’s Cup Areva Challenge monohull. During his collaboration with shipyards and naval architecture firms in France, Spain and Morocco, he invents TurboKeels: a twin-keel system whose lest is ballasted from side to side. The invention patented, taking over META Shipyard seemed like the next best thing to do.

His mission is to consolidate the achievements of the legendary shipyard, but also to add the creative touch that will allow META to navigate today’s challenging waters and thus continue its fantastic adventure.

Born in the same valley as META and with a name familiar to windserfers worldwide, her career was mapped out: since 2008, Nathalie has been assisting the shypyard’s management from an administrative, commercial and accounting point of view.

An Executive Assistant by training, she favors positions which allow for the widest diversity of tasks, within human scale structures. It is an interactive and stimulating format that she appreciates and that participates to the great complementarity between her very “maritime” professional activity and very terrestrial personal interests: running, cycling, hiking are all activities which fill her up with the energy and enthusiasm we much appreciate.

Nathalie is a valued collaborator, who faithfully has and does contribute to the welfare of the company .

A naval architecture engineer with a degree from ENSTA Bretagne, Marin’s work at META combines his passion for sailing and his experience of ocean cruising with the technical skills acquired through his training.

As an admirer of Gérard Janichon (Damien) and Bernard Moitessier (Joshua), he says he’s proud to be able to contribute to the development of META and its new series of ocean-going yachts, with modern lines and a spirit of adventure still intact.

Lover of nature, water sports, and concerned about the environment, Victor tackles his new adventure : his meaningful collaboration as a fully-fledged member of the META team.

Profil Linkedin

Lionel has learned and confectioned his skill at aluminum ship building at META, where he’s been a faithful member of the team since 2004. He has become the metalworkers’ go-to person for all questions related to Strongall ® boat building techniques.

Not only is he an experienced boilermaker, he’s got a secret skill up his sleeve: he grows grapes which participate in the making of one of the local Rhone wines.

We’re looking forward to the META vintage 😉

Etudiant-ingénieur en architecture navale à l’ENSTA Bretagne, Marin allie en travaillant chez META sa passion pour la voile et ses expériences de croisières hauturières avec les acquis techniques de sa formation.

Admirateur de Gérard Janichon (Damien) et de Bernard Moitessier (Joshua), il se dit fier de pouvoir contribuer au développement de META et de sa nouvelle série de voiliers hauturiers aux lignes modernes et à l’esprit d’aventure toujours intact.

Le chantier est donc très heureux de pouvoir compter parmi ses équipes ce Marin très compétent—mais aussi parfaitement polyvalent, avec un très bel esprit d’équipe et un sourire communicatif.

Anticorrosion

Your anti-corrosion solution for 50 years.

This zinc-based product is the best protection against hull corrosion so far. We are its historical retailer and use it for all of our boats.

Whether used as antifouling or covered by a regular antifouling, METAGRIP ® welds perfectly to the steel or aluminum hull thanks to the absorption phenomenon.

It does not deteriorate and therefore fully respects the underwater environment.

Do you live in metropolitan France ? Order online

You are not in metropolitan France? Ask for an estimate

Subscribe to the newsletter

By entering your e-mail address, you agree to receive our newsletter by e-mail and you are aware of our privacy policy . You can unsubscribe at any time using the unsubscribe links that you will find at the bottom of our newsletters.

Vérifiez votre boite de réception ou votre répertoire d’indésirables pour confirmer votre abonnement.

• OC Wally Cento
• 84 Mini Maxi
• IMOCA Open 60
• Consultancy Services
• 30m Blue Water Cruiser
• 25m Explorer Yacht
• 24m Fast Cruising Catamaran
• 23m Performance Cruiser
• 20m Explorer Yacht
• 20m High Performance Cruiser
• 18m Blue Water Cruiser
• 15m Performance Cruiser
• 15m Explorer Yacht
• 12m Explorer Yacht
• Multihull Design
• 18m Explorer Yacht
• 40m Blue Water Cruiser
• 40m Cruiser Racer
• 33m Performance Cruiser
• 30m Wally Cento
• 24m ORCsy Racer Cruiser
• 24m Day Sailer
• Carbon Component Design
• Yacht Performance Development
• CFD and Model Testing
• Twin Rudder Steering Systems
• Custom Deck Hardware
• Modifications and Refit
• VPP Routing and Sail Analysis
• Classic Yacht Refit & Optimisation
• Naval Architecture
• Engineering
• Rudder Design
• Brokerage Services
• 'Seahorse Magazine' #192
• Lucent #180
• Influence #171
• 'Eora' #169
• 'The Three Brothers' #168
• 'Edenred' #165
• Polka Dot #154
• 'Teata' #148
• ‘Sensei’ #131
• 'Sabre II' #93
• French Pineapple #79
• 'Letto Di Pletto' #47
• 'Mowgli' #41
• 23.8m Ultime Trimaran
• 20.7m Orma Trimaran
• 18.28m Orma Trimaran
• 16.75m Cruising Catamaran
• 16.1m Cruising Catamaran
• 12.8m Crowther Shockwave Catamaran
• 9.1m Seacart 30 Trimaran
• 26.3m Aluminium Sloop
• 22.38m Aluminium Classic Yacht
• 21.0m Steel Schooner
• 21.0m Aluminium Cruising Ketch
• 20.0m Aluminium Explorer Yacht
• 20.0m Luca Brenta Racer Cruiser
• 19.6m Aluminium Bluewater Cruiser
• 19.2m Aluminium Lifting Keel Sloop
• 18.23m Mylius Racer Cruiser
• 16.0m Sly Cruiser Racer
• 14.5m Aluminium Cruising yacht
• 13.87m Wooden Motor Sailer
• 11.6m Classic Pilot Cutter
• 25.25m Reichel Pugh Maxi
• 18.28m IMOCA 60 One Planet
• 18.28m O Canada IMOCA Open 60
• 18.28m Come in Vendee Open 60
• 18.23m Mylius FD Racer Cruiser
• 15.84m TP52 Racing Yacht
• 15.25m Pegasus Open 50
• 10.89m Figaro 3
• 10.1m Figaro 2
• 14.5m Aluminium Cruising Yacht

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Twin Keel Sailboat

Twin Keel Sailboat Boats for sale

2000 Beneteau 311 Swing Keel Twin Rudder

Apollo Beach, Florida

Make Beneteau

Model 311 Swing Keel Twin Rudder

Posted Over 1 Month

2000 Beneteau 311 Swing Keel Twin Rudder,The Beneteau 311 cruising sailboat with swing keel and twin rudders is a rare model that sails in less than 3 feet of water! Ideal for Florida coastal waters, Bahamas, ICW, Okeechobee Waterway and other shoal water regions. This US Coast Guard registered sailboat is a strong, safe, watertight and very clean sailboat that is well maintained with regularly servicing. Rigged for single-handed sailing or couple. Excellent sailing performance at all points including beating. Swing keel and twin rudders really help in enhancing sailing performance, particularly in strong winds & currents with high waves. To get through shoal channels and for anchoring near beaches and in cays, simply raise the swing keel. The B311 is able to settle on the keel and rudders at low tides, without tipping over!Mast head sloop rigging with slab-reefed mainsail on a smooth track & lazy jacks, furling genoa and optional gennaker with snuffing bag. Mainsail and genoa lines lead back to the cockpit. Full cockpit dodger and bimini.Installed instruments include autopilot, compass, depth/knots, GPS/chartplotter, oil/diesel/engine/temperature gauges, waste/freshwater tank gauges, VHF radio. Electric windlass with anchor, chain & nylon rode. Second anchor, chain and rode also included. US Coast Guard approved safety equipment and First Aid kits are also included. Cabin has CD player/radio with speakers. Auxiliary power is provided by inboard diesel engine & alternator, battery banks, DC/AC inverter, together with deck mounted solar panel. Also wired for shore power with battery charger and DC galvanic isolator. Multiple 110V and 12V outlets. Current owner uses several portable handheld instruments for weather/radar on notebook & smart phone, back up GPS, back up VHF, WiFi hotspot, etc that can be charged up when sailing. Accomodates up to 6 with large salon and two private cabins, fore & aft. Galley has oven/stove with refrigerator under the navigation station. Large freshwater tank. The bathroom has a toilet with Y-valve, wash basin, shower and waste holding tank. Both the galley and bathroom have hot and cold water. Navigation table with instruments and chart space. There are lots of storage spaces for provisions, clothes, fishing gear, etc. Cockpit cushions, helm cover, swim platform and shower. For more information, please feel free to contact me:Mike+1 727 242 3786 (Florida cell phone) - call or [email protected] $59500

ENDEAVOUR 33 SAILBOAT 1984

Rome, New York

Classic, fast shoal draft cruiser with rich teak interior, AC and heat, and lots of extras. Spacious salon. If you are in the market for your first family sailboat or looking for a vessel to explore the coastal US, then you need to see this sturdy 1984 Endeavour sailboat. Traditional layout, comfortable and ready to explore. Good setup for the solo sailor. She would also make a very nice live aboard! Current yard rent paid until October 2014. Family illness forces sale. SPECIFICATIONS LOA: 32' 7" LWL: 27' 6" Beam: 11' 6" Draft: 4' 6" Displ.: 11,350 lbs. Ballast: 4,600 lbs. enclosed lead Mast Height above DWL: 48' 9" Rigging: Masthead Sloop Sail Area: 539.5 sq. ft. Main Sail Area: 228.15 sq. ft. Fore Sail Area: (100%) 310.5 sq. ft. SA/D: 17.09 B/D: 40.50 % D/L: 244 Hull Speed: 7.3 knots PHRF - Northeast: 156 Designer: Bruce Kelley Fuel Capacity: 36 gallons Fresh Water Capacity: Approx. 56 gallons Holding Tank: 12.5 gallonsACCOMMODATIONS Spacious Saloon with beautiful solid teak doors and cabinetry throughout. Traditional layout in good condition. V-Berth forward. Salon features L-shaped port settee (converts to double) with a fold away table and starboard bench settee. Single quarter berth & navigation table to port. Galley to starboard. · Nav. Station: Flip Top chart table at forward edge of Quarter berth, three drawers, Rolled chart storage · Head: Located aft of the master to port with vanity, holding tank, head, sun shower, bulkhead mirror, three lockers, drawer, fiddled shelf storage and screened port · Teak bulkhead mounted table with hinged extension and bookshelf/cabinet behind. · Blue upholstered settees/berths in good shape · Generous lighting throughout. TV/FM coaxial cable wiring at shelf over hanging locker · Berths: 6 · Headroom: 6' 2" ENGINE & MECHANICAL · Yanmar 3GM30F Diesel, fresh water cooled, professionally and regularly maintained. · Engine hours: 1,625. · Racor fuel filter · Dripless stuffing box · 3-blade bronze prop, serviced · 36 gallon, welded aluminum fuel oil tank HULL & DECK · Solid KlegeCell foam core decks (no balsa to rot), no soft spots anywhere. No hull blisters. · Skeg mounted rudder for directional stability and strength · Anchor roller at bow · Bruce anchor w/ chain, 200’ 5/8” rode in deep bow locker, excellent condition · Secondary Danforth anchor with chain & rode · Teak hand rails · Anodized aluminum toe rails · Propane deck locker, stbd., with aluminum tank, manual & electric shut-off · West Marine propane kettle grill and canvas cover-like new · Outboard motor mount · Custom foam cockpit cushions · S/S swim ladder · Boarding gates P & S · Fenders & dock lines · Cockpit Speakers · Companionway teak boards, refinished, stow in stbd. lazarette storage pockets. · Companionway swing doors, removable (need repair HELM · Edson pedestal w/38" SS destroyer wheel with 2 instrument pods · 5” Danforth compass in SS hood · Teak folding cockpit table · Removable Edson teak drink caddy SAFETY · Type III PFD's · LifeSling · CO Monitor · Fire Extinguishers · Flare kit · 12V Bilge Pump · Manual bilge pump · First Aid Kit SALON · Spacious interior layout with large fold-out table (shelves behind) · Abundant drawer and locker storage throughout. · 10 opening ports & two large overhead hatches · Teak & holly sole in good condition · Several 12v lighting fixtures · 12 volt fan · 1 Wood framed companionway screen · 1 Wood framed hatch screen GALLEY · SS Galley Maid propane stove and oven · Large icebox with shelves · Adler Barbour 12V refrigeration · SS Sink with H/C pressure water · Microwave oven · Flo-Jet 12 Volt electric water pump, demand type with an accumulator tank. · Whale foot operated water pump in the galley (needs mounting). · Beautiful solid teak stove-top/cutting board with green Silestone insert, with storage slot · Built-in plate and utensil storage · Wine glass rack · Cookware and tableware V-BERTH · V-berth 6'6" · 12 V fan & Solar powered vent fan in hatch · 1 Wood framed Hatch screen · 2 drawers, 2 side shelves & cabinet HEAD · Enclosed head with shower & sump pump · SS sink with hot & cold pressure water · Teak cabinets and storage · Holding tank monitor · Holding Tank: 12.5 gallons with Y-valve and pump-out ELECTRONICS · Autohelm with hand-held remote · West Marine VHF580 Radio · Depth Sounder · Knot meter · Aiwa 40 watt Stereo FM/AM/Aux input with 2 interior KLH speakers and 2 cockpit speakers · Mast-mounted TV-FM antenna · Mast-top VHF antenna ELECTRICAL · 12,000 BTU CruisAir Air conditioning / heating · Breaker Panel: 12 volt DC; 110 volt AC · 4 Batteries (2-12V, 2-6V) · Battery isolator · Xantrex 40Watt multistage battery charger · 110 volt 30A Ship-to-shore cable - 50 ft. · Seaward SS water heater, 6 gallon, 115 VAC/ heat exchanger. · 2 Mast-mounted P&S deck lights · Chart table gooseneck light - red · Brinkman Q-Beam 12V Spotlight, 400,000 CP CANVAS · Two-part full-deck awning/sun-shade (a $1,400 item) · Bimini on SS frame · Helm cover · Sail Cover · Winch covers · SS dodger frame-no canvas STANDING RIGGING · Hood roller furling on head stay · SS wire standing rigging & chain plates · Four (4) each port & stbd. shrouds · Keel-stepped aluminum spar-Exc. Cond. RUNNING RIGGING · Two (2) Lewmar No. 43 two speed self-tailing primary winches w/covers. · Two (2) Lewmar No. 8 single speed mast mount halyard winches. · 2 winch handles · Harken 4:1 ball-bearing mid-boom mainsheet traveler, cabin mounted · Hardware in place / sail cover designed for lazy-jack system. Needs lines. · Genoa tracks with twin-sheet Schaeffer blocks, port and stbd. · Dacron braid sheets · Dacron braid halyards, internal & external, outhaul & topping lift · Aft turning (cheek) blocks port & stbd. SAILS · Footless main sail - new and unused · Original main sail · Genoa head sail - roller furling with UV stripe FRESH WATER TANKS · Polypropylene tank mounted below the stbd. settee, 36 gallons · Polypropylene tank located under port side aft quarter berth, est. 20 gallons, w/ separate deck fillSPARES / EXTRAS / OTHER · Includes 5 Hostar stackable jack stands for off-season layup ($1,000 value) · 4 – 10”x10”x2’ Hickory staging blocks · New Beckson port screens · Tool set in drawer · Hatch WindScoop for ventilation · Stern flagstaff & flag · All manuals, incl. Yanmar · 115VAC Vacuum cleaner · New extra odor-resistant hose for sanitary plumbing · Deck brush, cabin brush and dust pan · Boat hook · Custom compact winter cover scaffolding-ready for tarp (shown in photos) · V-belts, engine hoses, hardware, etc. RECENT UPGRADES INCLUDE · Brand new main sail - never used · Epoxy hull re-faring · Cushions covers removed, cleaned & repaired · Compass serviced · Holding tank seal maintenance, cleanout and sanitizing · New shaft zinc · Bottom paint (9/2014) · Hull polish & wax (9/2014) Work Needed: Woodwork around forward port lights in main salon needs to be repaired/replaced. Bright work: hand rails, cockpit table and taffrail.Price: US $ 26,500Located in Rome, NY on the Erie Canal (accessible to Lake Champlain, the Atlantic Ocean or the Great Lakes). This vessel is sold AS IS, WHERE IS.Not included / Negotiable: 8.5' Zodiac/West Marine dinghy, RU260, with oars, pump, bag, repair kit, plus 3.3 hp Mercury outboard - excellent. $1,200New-in-box Lewmar 1000 Pro-Series 12V Windlass, Stainless Steel. $700Pair (2) of new Lewmar Ocean Series 16CST Self-Tailing Winches, Chromed Bronze. $950 Call: 315-733-7305 (H) Text: 315-368-4939 (C) Email: [email protected] Endeavour 33: http://www.endeavourowners.com/boats/e33/e33brochure.pdf http://sailboatdata.com/viewrecord.asp?class_id=1878 http://sailboatdata.com/view_builder.asp?builder_id=27 http://sailboatdata.com/view_designer.asp?designer_id=162 Zodiac/WM RU-260 Inflatable “Roll-Up” Dinghy: https://www.youtube.com/watch?v=Z0FSSffq5zM http://www.inriodulce.com/lostandfound/RU260.html Mercury 3.3 hp Outboard: https://www.youtube.com/watch?v=MLY-tuSCkK4 http://www.mercury-marine.eu/mercury/en/Products/Products.aspx?Model=TwoStroke%203.3 Lewmar Winch 16CST: http://lewmar.com/products.asp?id=8150&lid=25361

Classic, fast shoal draft cruiser with rich teak interior, AC and heat, and lots of extras. Spacious salon. If you are in the market for your first family sailboat or looking for a vessel to explore the coastal US, then you need to see this sturdy 1984 Endeavour sailboat. Traditional layout, comfortable and ready to explore. Good setup for the solo sailor. She would also make a very nice live aboard! Current yard rent paid until October 2014. Family illness forces sale. SPECIFICATIONS LOA: 32' 7" LWL: 27' 6" Beam: 11' 6" Draft: 4' 6" Displ.: 11,350 lbs. Ballast: 4,600 lbs. enclosed lead Mast Height above DWL: 48' 9" Rigging: Masthead Sloop Sail Area: 539.5 sq. ft. Main Sail Area: 228.15 sq. ft. Fore Sail Area: (100%) 310.5 sq. ft. SA/D: 17.09 B/D: 40.50 % D/L: 244 Hull Speed: 7.3 knots PHRF - Northeast: 156 Designer: Bruce Kelley Fuel Capacity: 36 gallons Fresh Water Capacity: Approx. 56 gallons Holding Tank: 12.5 gallonsACCOMMODATIONS Spacious Saloon with beautiful solid teak doors and cabinetry throughout. Traditional layout in good condition. V-Berth forward. Salon features L-shaped port settee (converts to double) with a fold away table and starboard bench settee. Single quarter berth & navigation table to port. Galley to starboard. · Nav. Station: Flip Top chart table at forward edge of Quarter berth, three drawers, Rolled chart storage · Head: Located aft of the master to port with vanity, holding tank, head, sun shower, bulkhead mirror, three lockers, drawer, fiddled shelf storage and screened port · Teak bulkhead mounted table with hinged extension and bookshelf/cabinet behind. · Blue upholstered settees/berths in good shape · Generous lighting throughout. TV/FM coaxial cable wiring at shelf over hanging locker · Berths: 6 · Headroom: 6' 2" ENGINE & MECHANICAL · Yanmar 3GM30F Diesel, fresh water cooled, professionally and regularly maintained. · Engine hours: 1,625. · Racor fuel filter · Dripless stuffing box · 3-blade bronze prop, serviced · 36 gallon, welded aluminum fuel oil tank HULL & DECK · Solid KlegeCell foam core decks (no balsa to rot), no soft spots anywhere. No hull blisters. · Skeg mounted rudder for directional stability and strength · Anchor roller at bow · Bruce anchor w/ chain, 200’ 5/8” rode in deep bow locker, excellent condition · Secondary Danforth anchor with chain & rode · Teak hand rails · Anodized aluminum toe rails · Propane deck locker, stbd., with aluminum tank, manual & electric shut-off · West Marine propane kettle grill and canvas cover-like new · Outboard motor mount · Custom foam cockpit cushions · S/S swim ladder · Boarding gates P & S · Fenders & dock lines · Cockpit Speakers · Companionway teak boards, refinished, stow in stbd. lazarette storage pockets. · Companionway swing doors, removable (need repair HELM · Edson pedestal w/38" SS destroyer wheel with 2 instrument pods · 5” Danforth compass in SS hood · Teak folding cockpit table · Removable Edson teak drink caddy SAFETY · Type III PFD's · LifeSling · CO Monitor · Fire Extinguishers · Flare kit · 12V Bilge Pump · Manual bilge pump · First Aid Kit SALON · Spacious interior layout with large fold-out table (shelves behind) · Abundant drawer and locker storage throughout. · 10 opening ports & two large overhead hatches · Teak & holly sole in good condition · Several 12v lighting fixtures · 12 volt fan · 1 Wood framed companionway screen · 1 Wood framed hatch screen GALLEY · SS Galley Maid propane stove and oven · Large icebox with shelves · Adler Barbour 12V refrigeration · SS Sink with H/C pressure water · Microwave oven · Flo-Jet 12 Volt electric water pump, demand type with an accumulator tank. · Whale foot operated water pump in the galley (needs mounting). · Beautiful solid teak stove-top/cutting board with green Silestone insert, with storage slot · Built-in plate and utensil storage · Wine glass rack · Cookware and tableware V-BERTH · V-berth 6'6" · 12 V fan & Solar powered vent fan in hatch · 1 Wood framed Hatch screen · 2 drawers, 2 side shelves & cabinet HEAD · Enclosed head with shower & sump pump · SS sink with hot & cold pressure water · Teak cabinets and storage · Holding tank monitor · Holding Tank: 12.5 gallons with Y-valve and pump-out ELECTRONICS · Autohelm with hand-held remote · West Marine VHF580 Radio · Depth Sounder · Knot meter · Aiwa 40 watt Stereo FM/AM/Aux input with 2 interior KLH speakers and 2 cockpit speakers · Mast-mounted TV-FM antenna · Mast-top VHF antenna ELECTRICAL · 12,000 BTU CruisAir Air conditioning / heating · Breaker Panel: 12 volt DC; 110 volt AC · 4 Batteries (2-12V, 2-6V) · Battery isolator · Xantrex 40Watt multistage battery charger · 110 volt 30A Ship-to-shore cable - 50 ft. · Seaward SS water heater, 6 gallon, 115 VAC/ heat exchanger. · 2 Mast-mounted P&S deck lights · Chart table gooseneck light - red · Brinkman Q-Beam 12V Spotlight, 400,000 CP CANVAS · Two-part full-deck awning/sun-shade (a $1,400 item) · Bimini on SS frame · Helm cover · Sail Cover · Winch covers · SS dodger frame-no canvas STANDING RIGGING · Hood roller furling on head stay · SS wire standing rigging & chain plates · Four (4) each port & stbd. shrouds · Keel-stepped aluminum spar-Exc. Cond. RUNNING RIGGING · Two (2) Lewmar No. 43 two speed self-tailing primary winches w/covers. · Two (2) Lewmar No. 8 single speed mast mount halyard winches. · 2 winch handles · Harken 4:1 ball-bearing mid-boom mainsheet traveler, cabin mounted · Hardware in place / sail cover designed for lazy-jack system. Needs lines. · Genoa tracks with twin-sheet Schaeffer blocks, port and stbd. · Dacron braid sheets · Dacron braid halyards, internal & external, outhaul & topping lift · Aft turning (cheek) blocks port & stbd. SAILS · Footless main sail - new and unused · Original main sail · Genoa head sail - roller furling with UV stripe FRESH WATER TANKS · Polypropylene tank mounted below the stbd. settee, 36 gallons · Polypropylene tank located under port side aft quarter berth, est. 20 gallons, w/ separate deck fillSPARES / EXTRAS / OTHER · Includes 5 Hostar stackable jack stands for off-season layup ($1,000 value) · 4 – 10”x10”x2’ Hickory staging blocks · New Beckson port screens · Tool set in drawer · Hatch WindScoop for ventilation · Stern flagstaff & flag · All manuals, incl. Yanmar · 115VAC Vacuum cleaner · New extra odor-resistant hose for sanitary plumbing · Deck brush, cabin brush and dust pan · Boat hook · Custom compact winter cover scaffolding-ready for tarp (shown in photos) · V-belts, engine hoses, hardware, etc. RECENT UPGRADES INCLUDE · Brand new main sail - never used · Epoxy hull re-faring · Cushions covers removed, cleaned & repaired · Compass serviced · Holding tank seal maintenance, cleanout and sanitizing · New shaft zinc · Bottom paint (9/2014) · Hull polish & wax (9/2014) Work Needed: Woodwork around forward port lights in main salon needs to be repaired/replaced. Bright work: hand rails, cockpit table and taffrailNew price reflects work needed on rudder. Recent repair did not work to seal it and there is water inside. SS rudder post is good and rudder seems solid, is probably serviceable but may ultimately need better repair or replacement. Price: US $ 19,500Located in Rome, NY on the Erie Canal (accessible to Lake Champlain, the Atlantic Ocean or the Great Lakes). This vessel is sold AS IS, WHERE IS.Not included / Negotiable: 8.5' Zodiac/West Marine dinghy, RU260, with oars, pump, bag, repair kit, plus 3.3 hp Mercury outboard - excellent. $950New-in-box Lewmar 1000 Pro-Series 12V Windlass, Stainless Steel. $700Pair (2) of new Lewmar Ocean Series 16CST Self-Tailing Winches, Chromed Bronze. $950 Call: 315-733-7305 (H) Text: 315-368-4939 (C) Email: [email protected] Endeavour 33: http://www.endeavourowners.com/boats/e33/e33brochure.pdf http://sailboatdata.com/viewrecord.asp?class_id=1878 http://sailboatdata.com/view_builder.asp?builder_id=27 http://sailboatdata.com/view_designer.asp?designer_id=162 Zodiac/WM RU-260 Inflatable “Roll-Up” Dinghy: https://www.youtube.com/watch?v=Z0FSSffq5zM http://www.inriodulce.com/lostandfound/RU260.html Mercury 3.3 hp Outboard: https://www.youtube.com/watch?v=MLY-tuSCkK4 http://www.mercury-marine.eu/mercury/en/Products/Products.aspx?Model=TwoStroke%203.3 Lewmar Winch 16CST: http://lewmar.com/products.asp?id=8150&lid=25361

1980 Com-Pac 23 sailboat with trailer

Hillsboro, Oregon

Make Com-Pac

Category Cruiser Motorcycles

Length 23.0

Compac 23 sailboat w/ 2 axle trailer, motor and custom interior. The Com-Pac 23 is a highly respected trailer-able, ramp- launch-able pocket cruiser. Sleeps 4 adults, has accomodations for extended cruising vacations, and the flexibility of being trailered home afterwards. Small galley with pump water, small head with porta-potti. Features a NACA foil shaped shoal draft keel and outboard rudder, she handles rough seas with grace and style. 6 opening bronze ports and hand built yacht-like interior make this boat a proper mini- yacht. I've owned this one for 8 years, and it features a new interior: teak, mahogany and maple over 3/4" closed cell foam insulation. New wiring, breaker panel, Hummingbird GPS/ chart plotter/ sonar, Cd/ radio, VHF, LED/ fluorescent lighting. Electric start Nissan 9.9 hp OB, recently serviced impeller, tune-up. Tabernacle mast w/ Stainless Steel strut system, allows easy mast stepping even in windy conditions. There is still some detail work going on (interior trim mostly), but it's ready to sail and trailer most anywhere. CDI flexible furler with recent 120% jib sail. Main sail in useable shape; not overly stretched, torn or dirty. Heavy duty twin axle trailer w/ surge brakes, good tires and new bunks. New equalizer hitch. Recent paint, wiring, brake hydraulics. Trailered across the country with no issues. This is a good pocket cruiser type sailboat, with good stability, speed and reasonable comfort. Limited headroom (under 5'), but lengthy, comfortable berths (7'). I've sailed it under stressful conditions (20+ knots, rough seas), and made it home smiling. I can't think of a more enjoyable trailerable (and I've owned 6); stability, comfort, speed and portability are all well balanced and deliberate. Possible trade considered. Please call with questions. Patrick: 503-702-7104

1997 MacGregor 26X Sailboat

Las Vegas, Nevada

1997 MacGregor 26X This MacGregor 26X is a great trailerable sail boat that is also powered by a 15 HP Honda 4-stroke engine that operates well without any problems. Engine controls are on the center console to the left of the helm. It is a terrific boat for learning to sail. It is very forgiving and yet it can also be very competitive in club racing. It has a retractable keel with a draft of about 10 inches, allowing you to beach the boat all the way to the shoreline. This boat really has a lot of room for its size! It is good for motoring and sailing allowing you to go anywhere even when there is no wind. With a larger motor, it can easily pull a water-skier or a person in a tube. It's a very enjoyable boat that's easy to sail and very stable. EQUIPMENT The MacGregor is equipped with mainsail, jib and spinnaker along with sail bags. It has all of the standard equipment including stainless steel wheel, engine controls on the pedestal, hinged helm seat which allows easy access to motor and swim ladder on the transom, Emergency exit hatch on the foredeck, anchor locker, one over-sized gas tank, mooring cleats, custom mast raising winch, anodized mast and boom, deck tracks for jib and genoa, self furling jib, water ballast system, positive foam flotation, self-bailing cockpit, non-skid deck surfaces, stainless bow pulpit, stainless safety rails and lifelines, twin kick-up rudders, and swing centerboard. Also included is a Danforth anchor with 3/8" chain and poly rope. INTERIOR The boat has a galley with a sink and faucet as well as storage under the seats and in the drawers. It has a private head with a new porta-potty and a sink. There is full-standing headroom in the cabin and it can sleep six. AUXILIARIES Running lights, interior lights, electric panel, 2 commercial deep cycle 12-volt batteries, battery charger and isolation switch, Sony CD radio with interior and exterior speakers, handheld Magellen GPS, V berth, aft queen berth, and convertible dinette, helm and cockpit seat cushions, sail cover, and more. A fully functional Bimini over the after deck keeps you cool as you speed across the waves at 4 knots. TRAILER The dual axle trailer with surge brakes is upgraded from the normal singe axle trailer and can safely run at highway speeds in any State with absolutely no wandering. Tires are in almost new condition with an accompanying spare. "Boat also comes with a spare mast raising system as well as a spare mast ($1400 value). This spare mast is brand new and has never been installed. Old mast works very well but the previous owner felt that he had to have a new mast in reserve, just in case (??)" Contact Information: Brian (907)-252-1280. Please call me if you have any questions or you'd like to view the boat. This boat is located in Las Vegas, Nevada. PRICING NADA pricing for this boat quotes a price of $12,535 for low retail and $14,240 for average retail. This does not take into account the additional new mast which has a value of $1400 and the upgraded trailer would cost $3500 to replace. This gives this package a conservative value of $15,500 to $16,000 and we are offering this boat, motor and upgraded dual axle trailer at: $12,950 (including the spare mast.) THE FOLLOWING INFORMATION IS FROM THE MANUFACTURER "Every year, for the past 35 years, the various models of the MacGregor 25 and MacGregor 26 have been the best selling cruising type sailboats, not only in the United States, but in the entire world. We can think of no other manufacturer, of any type of product, that has so totally dominated its market for so long a period of time. The MacGregor 26 is one of the fastest and best handling of the trailerable cruising sailboats. It is easy to sail, and easy to trailer to your favorite sailing waters. You don't need an expensive mooring. It can be stored on its trailer, launched at any ramp and rigged in just minutes. On the trailer at highway speed, you can visit great places that water-bound boats will never see, and you can avoid the expense of in the water storage. The MacGregor 26 offers high speed powering without compromising sailing performance. You can have the peace and quiet of sailing, or the fun of powering around at a good clip--over 22 mph. Unlike any other boat, it opens up a world of endless variety--sailing, swimming, fishing, diving, water skiing or just fooling around on the water. Its high speed under power lets you get to cruising waters that are out of reach for a conventional six mph sailboat. You can live on this boat on land or on the water. Launch the boat, anchor in a quiet cove, and you can be as far away from the world as you want to be, You can have your own island, for free, at some of the most beautiful vacation areas on earth. Unlike land bound recreation vehicles, you will not be limited to crowded and expensive RV parks. You will never tire of the wonderful sensation of shutting off the engine and enjoying the quiet serenity of moving along under sail MacGregor has delivered over 5000 of the 26X, 3000 of the new 26M and a total of over 38,000 sailboats. They have been thoroughly proven over millions of hours of sailing. No other boats can match our quality, performance, comfort, convenience and low cost" "The price is low, the trailer is your mooring....... and the wind is free"

1986 O'DAY 27.2' SLOOP, CABIN CRUISER, WEEKENDER, SAILBOAT

Winter Park, Colorado

Make O'DAY

Length LOA 26.11

1986 ODAY 27.2 W/ custom dual axle trailer. This easy to sail, roomy, shoal draft family cruiser is in great shape and ready for her next adventures. Drawing only 2'11" with her wing keel, she can gunk hole where others would not dare. This boat is in excellent condition and she has a lot of gear, lots of upgrades and the boat has been well cared for. The O'Day 27 is a roomy vessel with standing headroom (6'2") in a cabin trimmed in teak. Powered with an inboard very reliable Westerbeke diesel with only 1145 hours. She has Garhauer genoa travelers and a 110 furling Jib on a Furlex furler. In 2014 she was updated with new paint job. A very large companionway and deck hatch brings the outside in and opens to a very generous salon, She is loaded with features and extras like a Edson wheel steering, bimini and full deck covers, Navico wheel autopilot, dual batteries set up with switch, Magma propane grill, , 2 burner alc. stove , s.s. sink, deep ice box with added insulation, aft 7' pilot berth, 7'salon settees with custom upholstery, a swing down bulkhead table hiding a custom dish, glassware and wine cupboard, pressurized water system, bath sink and electric head, macerator, holding tank, and too many more extras to list here. The deck stepped mast height is only 35 feet and comes with a custom raising system for trailering and storage. Lots of elbow room with her 9 foot beam. Weight 5,000 lbs. Ballast 1,930 lbs. Fresh Water 40 gals. Custom dual axle trailer. The current owner has had the boat in fresh water over twenty years. Hull: Fiberglass Speed: Cruising 5K Year: 1986 Maximum 7K Rig: Sloop rig Weight 5500 lb. 2'11" draft Wing Keel with 1870 lbs. of lead ballast Just painted hull! Stainless steel swim ladder mounted to molded swim platform Two opening cabin ports Translucent forward opening hatch Two each, bow and 2 ea. stern 7" Mooring cleats Teak Cabin top handrails Anchor locker at foredeck A couple can easily rig and sail this boat. Large gear and equipment locker in cockpit for fenders dock lines etc. MECHANICAL & ELECTRICAL: Apelco VXL 5150 VHF Radio with marine antennae and cockpit speaker 12 volt (DC) 110 volt (AC); battery selector Switch International running lights mounted on pulpits Custom made 110 & 12 volt circuit breaker panel 110/12v lighting in salon Electric bilge pump with counter Anchor 20lb. Plow with stainless anchor roller Tank minder system for fresh water and holding tank Onboard battery charge system & charge gauge New battery Shaft protector (donut style) PSS dry packing gland ENGINE: Inboard Westerbeke 10 hp. 2 cylinder FWC, 1" shaft, 2 blade prop, 1146 hours Recent low hour Hurst transmission 10 gallon aluminum fuel tank Quick Drain oil change system Racor Fuel filter System INTERIOR / MAIN SALON: Facing settees, Port Settee is 6'3, starboard in 5'6" Large quarter berth 7'6" long by 4' wide. Headroom 6'2" under companionway Custom Drop leaf bulkhead mounted table: folds to store when not in use. Custom dish, glass and wine rack cupboard hidden behind. Custom teak tool and parts cabinet Storage locker aft of port settee Cabin Curtains Kenwood cd player 6 stacker Polk audio speakers Teak cutting board, soap holder, towel rack, paper towel and toilet paper racks Brass barometer and clock Security system Brass halogen reading lights in v berth Red map light Gimbaled brass oil lamp V berth storage pouches GALLEY: Origo Stainless steel, two burner, gimbaled non pressurized alcohol stove Pressurized water pump with separate pressure tank Deep stainless steel sink 3.5 cubic foot ice box with customized added insulation Custom Teak food and dish lockers Custom storage / cutlery drawer Fresh and seawater faucets HEAD: Pressurized Water Jabsco electric Marine head with holding tank: Y valve and shore pump out fitting Storage Locker and medicine cabinet 30 gallon holding tank with macerator and diverter valves Hanging locker 25 gallon seamless water tank with deck fill SAILS & RIGGING: All sailing functions fully controllable from cockpit Furlex Jib Furling and Reefing system Model A Ullman 110 jib with Sunbrella UV Cover Ullman main large roach cut with 4 stays, 2 single line reefs and single line outhaul Custom Sunbrella mainsail cover Cruising designs Gennaker with Chute scoop and light wind pole Adjustable sliding spinnaker mount on mast Garhauer Rigid Boom Vang Adjustable boom topping lift Adjustable backstay 2 Barlow Self tailing winches Cabin top Mounted Lewmar # 15 halyard & mainsheet winch Genoa track with lead blocks Mast stepped on deck with custom hinged mast step Mast running lights Single line reef system leads to cockpit for quick reefing without going forward Mainsheet traveler on cabin top - custom Anodized aluminum mast and boom Internal Halyards COCK PIT AND STEERING: Edson Pedestal Steering System Navico wheel autopilot Si-Tex digital 4" instrumentation at the wheel in a pod. Includes wind, speed and depth Teak folding wheel table Teak drink and binoculars holder Signet depth gauge back up on bulkhead Signet bulkhead mounted compass Full custom cockpit cushions MISCELLANEOUS: CD player with cockpit and cabin speakers Cockpit Shower Outlet Dock lines & cleaning equipment & miscellaneous line Mooring pole CANVAS COVERS: Spray Dodger Winch Covers Wheel cover Mainsail Cover Cabin top Cover Custom shade cover TRAILER: Custom Built Twin Axle Trailer. Includes built in Mast raising system, sliding built in extra extension tongue for launching, front ladder, tire covers, utility box, and cables for launching

Westerly Centaur 26' sailboat, inboard diesel, with trailer

North Ridgeville, Ohio

69' Westerly Centaur 26 ft sailboat, inboard Volvo 25 h.p. diesel, twin keel, with trailer, tiller steering, 4 sails, roller furling for head sail, 6' 4'' cabin head room, sleeps 6, head , galley, ice box, restoration is 75% completed. 6500 lb heavy duty construction built to Lloyds of London standards. $6500/Possible trade for motorcycle.

Morgan WEST INDIES 36 SAILBOAT...Beautiful... in St Pete Fl.. EXTENSIVE refit

St. Petersburg, Florida

Make HERITAGE YACHT CORP

Model Morgan WEST INDIES 36

Length 36.5

Gorgeous, ...over 65k spent on refit....***1996 Perkins M30 fresh water cooled diesel***, low hrs. starts runs, excellent, no smoke, new oil and filter perkins m30 owners manuel Brand new bottom paint, 3 coats...12/2016, @ $2000 Built and designed by Charlie Morgan in Clearwater Fl. hull #4 of 40 built 36.5 feet on deck....38 feet overall length Heavy, thick hand laid FG hull and deck, combined with original robust construction... FAR EXCEEDS standard sailboats such as: islander, catalina, irwin,pearson, columbia, hunter, ericson etc... 11, newer solid Stainless Steel ports. 2 newer SS Lewmar deck Hatches. all new running rigging. newer ss Norseman cones all around custom SS mount mid boom mainsheet track with all new blocks '14 newer turnbuckles oversized lower shrouds internal halyards ***2014,... new (5) thick oversized massive SS electropolished chainplates. ... external lead keel dropped: new SS studs and bolts, and new SS backing plates, then rebed...new SS awthwartship stringers thrubolted under cabin sole...along with new SS mast step..rudder dropped, new rudder gland with new packing, new steering quadrant, new SS rudder boss, new steering cables....2014......all these above;...exceptional, laborious, expensive, extensive comprehensive metal refits. .****. seperates this vessel from just about any other vessel from this era....truly an incredible update refit..., on a deserving, thick , strong hull and deck..**** ..she's ready for another 50 years of service....*** an outstanding, capable sailing vessel...virtually one of a kind...! Pride of ownership evident Throughout!... mast rewired '14 new masthead tricolor light new mast mount foredeck light deck completely stripped of all hardware and Imron jet aircraft painted 2007, topsides and deck; with blue cove and boot stripes, shiny and beautiful...bulletproof...$600/ gallon,...yet another major, massive Expensive upgrade...update... new 2014 Garmin 740s color , touchscreen GPS navigation station vhf radio, stereo CD, dual speakers all new hoses and ss clamps on 1996 Perkins diesel engine and exhaust new engine water pump, 2014 merely 1100 hours,( low hrs.) on 1996 Perkins M30 diesel, ....runs, starts excellent, no smoke. new oil and filter on engine 12/16. new 1" thick engine room insulation /sound deadening new Raycor fuel filter plastic 28 gallon fuel tank, engine burns 1/2 gal /hour @ 6 knots cruise. 2 plastic water tanks, 80 gallons water total new cutlass bearing and shaft packing, '14,... 3 blade prop new 6 volt golf cart batteries,235 amps,... new deep cycle 12 volt engine start battery 135 amps.... 10/16 Pro mariner 20 amp 3 bank automatic battery charger new hi output 95 amp alternator and belt 6/16 new LPG princess 3 burner SS stove and oven new xtra custom cockpit scuppers with bronze valves, '14,... total 4 scuppers in cockpit new cockpit cushions '14 Teak cockpit floor grate, with blue canvas cover new canvas '14; to include... mains'l cover, hatch covers, new bimini top, new custom main compainionway hatch cover,... teak grate cockpit floor canvas cover. all new interior cushions '14 Excellent Lavac vacuum head, manuel, with 15 gal. plastic holding tank. 7 cu ft ice box with '90's engine driven grunert refrig freezer with holding cold plates, 1/2 hp compressor, needs work or replacement. newer stem head backing plate. CPT wheel autopilot, excellent 2009, over $2100 when new... new masthead windex '14. Simply, a magnificent well found sailing vessel, visually appears to be about 5 yrs old....Stunning,... everyone who sees her compliments her classic beauty. 55ft mast, 695 sail area yields excellent sailing performance, sails and rigging in very good condition.. 36' 5" on deck, 38 ft. overall, 4'2" draft, centerboard delete, trunk filled with 300lbs.lead and epoxy then sealed, Large rudder with large full skeg,.. 7300 lb.external lead keel,..17,000 lbs. dry unloaded...20,000 lbs. cruise loaded.... 12 ft beam,...* 32 foot long waterline.... sturdy , stable, stout, solid and strong... ..capable of sailing anywhere in the world.. USCG documented vessel,... no liens , privately owned outright. twin anchor rollers on extended spit, thus 38 ft overall, with dual hawse pipes and 2 anchor rodes with chain, 35 lb, cqr anchor. custom cockpit table/box stows 2 10lb LPG bottles and more newer inner forestay and running backs, cutter rig can be an option. or storm foresail hanked on. Airmar 200wx wx nav station, with masthead sensor, 2014 Airmar DT 800 bronze tranducer with 20 degree forward look 2014 16000 BTU marine Airconditioned,... cools excellent in summer Fl. heat 2014 ;NMEA 2000 wiring... for plug and play electronics and accessories SS Dodger frame included,no canvas though new marine 6 gal water heater,w new hoses new shower sump box with dedicated pump new cabin floor,..3 epoxy barrier coats applied , then 3 coats of bottom paint, no blisters. This vessel would have an Impeccable survey should you wish to have one...truly,... a one of a kind find...This boat has no rot, no rust,no blistering of any kind,... anywhere.. All bulkhead taping to hull is as the day she left the factory!... the interior frp liner/headliner is thick, solid strong and shiny!! 6' 4" headroom all interior cabinets and storages, cleaned and painted with quality superhard mildew mold resistant white exterior paint. CLEAN....! the bilge in this boat is...clean This boat has a cameo appearance in the 2011 Hollywood movie "Dolphin Tale" filmed in Clearwater FL. Kris Kristofferson lives on her in this acclaimed flick. The sailing photo is of this actual vessel taken after Imron paint. knowledgable, experienced, x captain, liveaboard cruiser, x boat builder, rigger; older private seller/sailor,.... needs no brokers or help in selling this fine boat,... whatsoever! over 800 labor hours of love and attention in the past 19 months, and it shows. She is exactly as pictured! Exceptional!... replacement cost? conservatively... $95,000 +, estimated professional survey value $64,000+...realistically priced at $36,500. numerous tools, spare parts, chart kits, hardware, screens , literature, magazines included in sale. she appears ....exactly.....as she is in the pictures....! looks better in person actually...a fine little ship... buyer responsible for vessel pick up in St Pete. Florida she could be kept at the same non liveaboard private house dock. she needs dodger canvas cover for supplied ss frame, fridge install, windlass (if your not younger) 1 more anchor bad back/disc forces reluctant sale..this is my dream boat; wanted to sail the Bahamas/Caribbean again...physically can't... more pictures available upon serious buyer phone request. also for sale at: sailboatlistings.com and Tampa Craigslist [email protected] seller, [email protected] not responsible for any shipping , buyer pays for any shipping costs. buyer must make full payment within 3 days. On Jan-19-17 at 07:26:36 PST, seller added the following information: The boat can be kept at its current dock/slip in south st pete fl. On Jan-19-17 at 12:26:10 PST, seller added the following information: Listed on SailboatListings.com

2001 J46 sailboat sail boat J-46 sailing cruiser racing fresh water. UPGRADES!

Charlevoix, Michigan

Make J Boats

Length 46.0

Beautiful, generously equipped and meticulously cared for freshwater J46 owned by senior couple. Used only for day sailing and minimal light cruising in northern Lake Michigan, Lake Huron and Lake Charlevoix for only 12 four month seasons (was not launched in 2012 and 2013). Always kept in inside heated storage when not in the water for the four month summer season. It is in pristine condition. J/46 may be the only investment grade sailing yacht of its size not requiring professional crew to sail at designed performance levels…..or to maintain. Two people can easily manage her upwind and down to achieve the same 8 knot passage-making speeds under sail that is possible when motoring with 76hp diesel auxiliary. The joy of sailing the perfect boat is, after all, a goal we believe every owner ultimately seeks. To insure that good sailing days are spent sailing rather than scrubbing and varnishing, J/46 is designed to be virtually maintenance-free. Her exquisite joinerwork is protected from the sun……below decks where it’s beauty can be preserved More photos available in this link: https://docs.google.com/document/d/1QEllizB6x4FKTe3kGwlbjYaLgJMrQEg8x6PdVtIa14Y/pub Factory Options: Refrigeration Package: -Seafrost Mechanical Refrigeration.-Additional Plates & controls for Freezer.-Supplementary 110VAC Shore power Assist. Supplementary Power Package: -Additional 210 amp Lifeline AGM Battery for total of 630 amps for house banks (location is in lieu of nav station bottom drawer).-Heart Freedom 25 Inverter/Charger (in lieu of std ProMariner 30-3 charger).-Heart Echo Charger (to service engine start battery through AC system).-Heart Link 2000 Battery Monitor (for (2) house battery banks).-Heart Link 10 Battery Monitor (for engine battery). Supplementary Plumbing Package: -Vacuflush Forward Head.-Dockside Water Inlet.-Seagull Water Purifier in Galley. Cruising Accessory Package: -Cockpit table.-Companionway Screens Additional Single Options: -ESPAR Diesel cabin heater.-Lewmar 64 CEST Power Primary Winches.-Bolstered Ultra Suede Cushions.-Radar Mast thru deck.-Microwave in galley.-Harken adjustable Genoa car leads.-Rubrail over cove stripe-28” High Pulpits & Stanchions in lieu of std height.-Sea water wash down pump w/faucet in anchor locker.-Hall Spars Windex.-Hall Spars “NO STRIKE’ lightning dissipater.-Hall Spars GAM antenna & cable.-Hall Spars painted carbon fiber whisker pole.-Hall Spar Whisker Pole Track and Car.-Hall Spars 3rd folding mast step.-Hall spars Dutchman mast sheave.-Hall spars Dutchman Halyard.-Flag Halyard & Hardware.- S. S. Turnbuckle Covers (6).-Cockpit Full Glass and Screen Enclosure.-Dodger to Bimini Insert.-Helm Pedestal Cover.-S. S. Grab Rail along aft edge of Dodger.-S. S. Grab Rails port & starboard on Dodger sides.-S. S. Dodger & Bimini supports in lieu of straps.-S. S. Bimini handrails port & starboard.-Power engine oil pump-out system.-Max Prop 3 Blade Feathering Propeller.-Dripless shaft seal.-Memory foam mattress in forward cabin in lieu of std.-Second custom V birth insert for additional standing room.-19” HD flat panel TV and small DVR.-2nd bottom refrigerator door.-Alpine stereo AM/FM w/6 disc CD player & Bose Marine cockpit speakers.-Weems & Plath Brass Ships Clock.-Weems & Plath Brass Barometer.-Variable Speed Cabin fans fore and aft cabins and main salon.-Prime bottom plus VC-TAR plus 2 coats VC-17 anti-fouling paint.-Awlgrip Hull Flag Blue w/Red Boot Stripes.-Patriot American Flag Graphics. Sail Package (Quantum): -Kevlar/Mylar/Dacron Tri Radial Cut full Batten Main & 135% Genoa.-MC6000 105% Cruising Jib.-Antal Mast Cars.-Dutchman Flaking System.-Asymetrical Spinnaker w/deployment bag.-Antal spinnaker Snuffer.-Harken Mark II Roller Furling System. B & G Hydra 2000 Navigator Pack: -Navigator Pack, Hydra 2000, Type 2.-Standard Full Function Display Pack, Hydra 2000.-20/20 Display Pack, Hydra, Green Backlight.-20/20 Display Pack, Hydra, Red Backlight.-Depth Sensor with Bronze Flush Mount Hull Housing.-Speed Sensor with Bronze flush Mount Hull Housing.-Analog display Pack, Apparent Wind Angle, 360 degrees w/cable.-Linear Rudder Position Sensor Pack, w/installation kit for Type 2 Ram.-Pilot Ram Drive Pack, Type 2 w/cables (12Vdc, adjustable rose joint).-Cable, 213 Mast w/bkt, 80ft.-Pin, Quick Release, Pilot.-Edson J46 Tiller Arm. Raytheon Radar/Chart Plotter and Accessories: -Upper Station – 7”Color LCD Pathfinder Radar w/Raychart and 24” 4kw Raydome.-WAAS GPS Antenna.-Cmap NT Northern Michigan.-Cmap NT Lake Huron and North Channel.-Radar Cable Connector (Radar Mast Base).-Edson 3-1/2” Deluxe Mast 144”.-Edson Adapter.-Edson Radar Platform, Deluxe.-Edson Long Antenna Bracket-Starboard and Port.-Edson 28” Antenna Hoop.-Edson 13” Antenna Extension (GPS antenna mount).-Shakespear TV Antenna 2030-G. Communications Options: -ICOM M502 VHF w/ Optional Cockpit HM-127 Remote-12 Volt Pedestal Outlet-Telephone and TV cable cockpit to nav station Safety Equipment: 2 Sospenders inflatable PFD w/harness, lanyard & rearm kit1 Crewfit inflatable PFD w/harness lanyard & rearm kit2 Regular PFD w/harness & lanyard4 Regular PFD6 Throwable floatation cushions2 Jack Lines 45 ft port & starboardI Radar reflector1 Bosun chair1 Throwable Life Sling1 deployable auto inflatable Life Saver Buoy4 Fire extinguishers – various types1 Submersible Hand Held HX460S VHF Marine Transceiver w/ barometer sensor1 Throwable Rescue Line Bag1 Avon 48lb Inflatable dinghy w/ Poly pro towing line, bridle & elect pump – fits in aft cockpit locker1 Honda 2hp 4 cycle dinghy motor & aft pulpit motor mount1 Winslow 6 person Super-Light Offshore Life Raft w/ SEP packed Survival Supplies Inflatable insulated double floor Heavy duty TriPod Arch tubes w/canopySpare parts: water pump impeller, 2 Racor fuel filtersVarious sizes of tapered wood emergency thru hull plugs 1 Handheld compass1 backup Yeoman digitized chart plotter with hand-held Magellan GPSVarious rescue flares as required by Coast GuardLakes Michigan, Huron and North Channel Charts Ground Tackle: 1 44lb Spade anchor w/swivel shackle, 25ft high test 3/8” chain and 250ft 5/8” rode1 Fortress Fx-37 Alum. Anchor w/ 15ft 5/16” chain & 200ft 5/8” rode in deployable anchor bag 250ft 5/8” Line for on-shore anchoring Dock Lines & Bumpers: 3 Taylormade bumpers w/blue covers6 Yale Red Colorline braided 5/8”x40ft dock lines w/Perma Buoy chafe guards Shore Power: 1 50ft 50 amp power cable1 60ft 30 amp power cable1 Adapter 50 amp to 30 amp Maintenance equipment: 1 Universal Pole w/boat hook, 2 brush heads & curve end1 50ft water hose Note: All 4 house batteries and the engine starting battery replaced May 2015 with Lifeline AGM (house) and Optimus (engine) batteries. J/46 Specifications Hull & Deck SCRIMpTM infusion molded sandwich construction using triaxial, biaxial and unidirectional glass reinforcements with Lloyd's and ABS approved end-grained balsa core. (SCRIMpTM is the patented resin infusion molding process of TPI Technologies, Inc.)TPI transferable ten yearwarranty against hull blisters. Interplastic vinylester resin on the outer hull layer.Lead & antimony fixed 9,350 lb., 6.2' draft, and fin/bulb keel bolted to a deep molded stub.White (other light colors are optional) Gel Coat hull with double tapered bootstripe and molded indented cove stripe. White gelcoat deck with choice of five non-skid colors in tones of white, gray and beige.HUIl-to-deck joint bond,ed with 3M 5200 and Plexus MASSO on the transom, side decks are covered with a thru-bolted clear anodized aluminum toe-rail.Two lazarette lockers on fantail, port cockpit seat locker and port utility locker for helmsperson outboard of wheel. Propane locker outboard of wheel to starboard drained and vented overboard with two 10lb aluminum bottles. Molded instrument pods on port and starboard coamings and on wheel pedestal.Molded companionway seahood with integral instrument pod.(3) Oorade boxes molded integrally into deck for ventilating owner cabin, main cabin and forward head area.Molded swim platform with off-center gate and fold-up ladder.Gasketed bow anchor locker and spinnaker storage area with overboard drain.316 stainless handrails on cabin trunk (4) total.GRP molded main structural bulkhead, glassed fore & aft on hull and deck as support for shroud chainplates with single door opening to v-berth cabin.Heavy duty molded structural keel support grid including engine bed, mast step, and longitudinal stiffeners. Fabricated aluminum mast step and engine bed tapping plates molded into structural keel grid.Positive traction nonskid on horizontal deck surfaces. Propulsion & Steering Yanmar 4JH-TE turbq-charged 76 hp, 4 cylinder, diesel engine with fresh water-cooling, dual R~cor fuel filters and 150 amp alternator.Yanmar C-type recessed engine instrument panel in cockpit with Acrylic cover including gauges for tachometer, fuel level, operating hour meter, fresh water temperature, amperage, oil pressure and oil temperature. Morse-type control gear shift and throttle mounted on pedestal.Parallel fuel system with 60 gallons in primary tank below the aft starboard berth, and 30 gallons in secondary tank behind aft bulkhead to starboard. Secondary tank gravity feeds into primary for 90 gallon total capacity.Two blade 20" Max Prop with 1..25" Aquamet shaft.AquaOrive self-aligning thrust bearing to minimize shaft vibration.Ultra Sound Acoustics VO-1 00 insulation in engine compartment.Balanced spade rudder constructed with unidirectional glass and large diameter shaft mounted in Harken composite rudder bearing to exceed ABS requirements.Aluminum emergency tiller.Edson 60" diamond series aluminum wheel with leather grip.Custom molded pedestal with guard and integral binnacle, 5" Ritchie compass, 9" x 12" instrurnent mounting area & Edson thru-shaft wheel brake.(2) Teak helm-station foot braces. Interior Satin varnished cherry bulkheads and furniture panels with cold molded cherry trim, drawer and cabinet faces. Main bulkhead with single opening and recessed cherry paneled door with Mobella lock-sets. Forward and aft heads trimmed in teak.Cherry trimmed vinyl headliner throughout forward, main and aft cabins. Polyurethane teak & holly veneer floor panels with underside and end-grain sealed with epoxy.Choice of interior cushion fabric colors. (ultra-suede or ultra-leather options available)5" layered & bolstered main settee split wrap-around cushions with two-tier split backrests. 4" foam cushions in fwd and aft cabins. Large twin berth forward cabin featuring 4 drawers, 4 lockers, hinge-up bunk tops to maximize storage; hinged V-berth filler; changing seat, hanging locker w/louvered door, and bureau/vanity with 2 drawers. locker. and cabinet above with cherry louvered doors & shelf.Forward head includes vanity with mirrored acrylic slider storage, teak towel rack, mirror storage cabinet below molded sink, enclosed by cherry paneled door (on outer face) and white laminate finish on head side.Stall shower with teak slat bench seat, cabinet locker with mid-height shelf outboard, shower fixture mounted on bulkhead with adjustable shower faucet. Local self-priming pump services shower sump and drains overboard.Pilot berth in main cabin to port with small mid-height convenience shelf at aft end.Two storage cabinets with 'Iouvered doors to ~ccommodate main cabin entertainment center above starboard settee. (2) Book storage shelves between cabinets with removable cherry retainer battens.One large drawer and one locker outboard of starboard settee backrest cushions.Settee backrests of cherry veneer and cherry trim.Varnished cherry wood hull slats in main, aft and V-berth cabins.Cherry main cabin drop-leaf table with removable fiddles, two drawers and internal bottle storage.Large 30 x36 sit-down. forward-facing navigation station with hinged tabletop. Features include; outboard shelf, access to chart storage and sliding organizer tray below table top, cushioned seat of layered bolstered foam. instrument cabinet with (2) large wood panel faces hinged at the bottom for quick access, file storage drawer below nav seat to fit hanging files, binocular & misc. storage cabinet outboard of seat, and series of three utility drawers on inboard tabie support face.Starboard aft cabin with recessed cherry paneled door, hanging locker with louvered door and bureau/vanity with 2 large drawers. hinged footlocker, and cabinet with cherry louvered door & shelf. Additional drawer above engine.Aft head/shower combination accessed via cherry paneled door. wet hanging area outboard. cabinet below molded sink, mirror, (2) teak grab rails and direct access door to lazarette locker area equipped with fore and aft divider. Teak companionway steps cold molded with angled ends & Treadmaster non-skid for safe entrance and exit. Cherry overhead grab rails in main cabin.All drawers and cabinets with polished positive-latch push buttons. Galley "Wheat Matrix" Fountainhead color for counter tops with cold-molded varnished & tapered cherry fiddles.Scandvik polished 8" deep SS double sink recessed below Fountainhead on forward island with deluxe hot/cold pressure-water gooseneck faucet and manual fresh water faucet with whale foot pump. Storage areas in louvered doors below sink for cleaning supplies and garbage pail with flip lid access.6.5 cu.!!. Deluxe icebox located on center island. Features include molded GRP box insulated with Glacier Bay Ultra R vacuum insulation panels and foam top. Organizing shelves & interior light included.3.5 cu.!!. ice box, convertible to optional freezer, located outboard of sink. Featuring molded GRP box with 3-1/2" foam insulation and mounting space for refrigeration cold plates.Three-burner Force 10 propane stove/broiler/oven with thermostat control, patented slide-away oven door recess and S.S. stove bar. Additional storage foot locker below oven.Plate, bowl, cup, and glass storage compartment on bulkhead att of stove.Top access dry good storage compartment below counter top directly outboard of sink.(3) Large cabinets mounted outboard and covered by three louvered cherry doors. Aft two cabinets installed with mid-height shelves. (Optional Microwave replaces middle cabinet door and area).Dual slider cabinet, bin storag8. and AC outlet mounted below cabinets. Flatware drawer, utensil drawer and utility cabinet with mid-height shelf and louvered door under outboard counter. Sink-top cutting-board.Stainless grab post on forward inboard galley corner. Plumbing Hot & cold pressure water system with 12-gallon hot water tank and accumulator tank. Service to (2) heads, forwa~d shower, galley, & swim platform shower.Self-priming direct sump pumps for showers draining into seacocks.Automatic bilge pump with float switch and dedicated panel in nav station wired direct to DC system. 120 gallons total water capacity in (2) custom molded tanks complete with baffles, inspection ports, and secured in place below main cabin settee berths.Raritan PH-2 heads with holding tanks. Overboard "Y"- valve offshore discharge and holding tank pump out systems. Two manually operated bilge pumps, one mounted in the cockpit and another in aft head with hose to reach bilge. (ORC category 2). Electrical Standard system batteries include: (1) group 40 (210 amp) and (2) group 31 (105amp) deep cycle batteries to serve the house, and (1) Optima 1000 (1,100 CCA) battery for dedicated service to the engine. All batteries are Concorde's Lifeline AGM sealed, absorbed glass mat type series.ProMariner ProMatic 30-3 Battery Charger. Balmar 91-150 Alternator and Max Charge external regulator with temperature sensor for altemator.BattJMaxx Automatic Battery System with remote momentary parallel switch near cockpit engine panel. .Master battery switch at n~l.Vstation with 1,2,Both,Off for House batteries and single On/Off switch for engine start battery.Deluxe Bass AC/DC backlit electrical panel w/digital condition meters, circuit breakers, accommodation for optional generator installation and air conditioning systems. Panel accommodates 33 DC breakers (24 occupied w/two spare standard) and 11 AC breakers (9 standard).Navigation, steaming/foredeck, anchor and tri-color masthead lights.50 amp 11OVAC shorepower system with 6 outlets, 50ft shore power cord and Guest galvanic isolator.Bonding system to meet ABYC project E-1.Propane solenoid switch panel in galley.Ten swiveling Imtra stainless halogen reading lamps, halogen overhead lights in main cabin, flexible armed lamp at navigation station, two florescent lights, one in each head.Four Hella variable speed cabin fans over berths. Deck Hardware (2) Lewmar 64CCST self-tailing 2-speed all chrome primary winches with gear ratio of 3.1: 1 in 1 gear and power ratio of 64:1 in 2nd gear located in recessed bases on cockpit coamings. "'(2) Lewmar 54CCST self-tailing 2-speed all-chrome halyard/reef/spinnaker secondary winches on cabin trunk.(2) Lewmar 48CCST self-tailing 2-speed all-chrome mainsheet winches outboard of traveler in recessed bases. (3) Lock-in Harken Speed-Grip 10" winch handles, (2) 8" Speed-Grip handles for mainsheet. Four cockpit mounted PVC winch handle holdersThurston cockpit dodger with roll-up forward window, removable side curtains, stanchion supports and stainless grab bar on aft edge.Thurston deluxe helmsman bimini with stanchion supports & viewing window (same color as dodger).Five white acrylic cockpit cushions for helmsman and cockpit seats.(2) Harken Black Magic 3010 (1OOmm) footblocks for genoa sheets when using dodger, mounted on cockpit coamings aft of primary winctTes. (2) Harken Black Magic 3006 (75mm) double footblocks with lock-off outboard of the primaries for spinnaker sheets and checkstays.(2) Harken Black Magic 3005 (75mm) mainsheet foot blocks wllockoffs mounted on angled pads at winches.2:1 Mainsheet system consisting of (2) Harken 1969 AirBlocks (75mm) mounted on traveler and (1) 3007 AirBlock (100mm) attached to boom bale. Harken 560-S Big Boat mainsheet traveler track with Harken 1939/1935 car w/control blocks for 6:1 purchase led to both sides of cockpit to 1893 track control ends through cockpit side mounted 222 blocks to 150 cam cleats. (2) 168 swivel blocks to adjust traveler from forward or aft side of track.Single rope clutchmounted in cockpit for heads ail furling. Lewmar Concept 2 anchor windlass system with #203 ropelchain gypsy, manual override, 1S0 amp breaker in nav station, hand held control unit mounted in forward deck anchor locker. Gypsy requires 3/8" ACCO G40 or G80 chain and S/8" braided rope.Custom 316 stainless mast collar with 10 bales for halyard and reef lines and forward halyard bar. (9) Schaefer 08-0S stainless halyard and reef blocks wlinvestment cast shackles.(4) Lewmar Superlock double rope clutches, mounted in pairs forward of each secondary winch.(2) Harken 1969 (7Smm) AirBlocks shackled to U-bolts at transom corners for mainsail checkstays.(2) Harken 1969 (75mm) AirBlocks shackled to U-bolts aft on toerail for spinnaker sheets.(2) Clear anodized aluminum "T" tracks (13' x 1.25") for jib/genoa leads. Additional 3' x 1.2S" track mounted outboard of1 00% jib position for outboard lead.(2) Schaefer 32-33UC screw-pin type jib/genoa lead blocks.(2) Schaefer OS-99 snatch blocks for spinnaker twingslor outboard jib/genoa leads.(2) Stainless t-track slider cars.Asymmetric.spinnaker deck gear including: (2) Harken 1969 (75mffi1 Airblocks mounted on "U" bolts near sternpulpit and (1) 1969 75mm AirBlock mounted on anchor roller.White molded flagstaff mounted in 316 SS deck socket on aft deck edge close to centerline with 4 x 6 American flag. aRC Bow pulpit of 316 SS with double rail offshore navigation lights and forward gate.aRC Stern rails of 316 SS w/2 rail split design including a stern boarding gate to starboard and stern light. Tapered 316 SS lifeline stanchions with SS bases mounted to toe rail.Double lifelines heights to meet ORC standards with boarding gates to P&S using Gibb hooks.Padded Sunbrella lifeline covers for each lifeline outboard of helmsman's station w/color to match dodger & bimini. Two 10" bow cleats, two 8" stern cleats, two 8" amidships cleats.Custom designed 316 SS bow roller/stem~ead to accommodate Simpson-Lawrence Delta 35,45 & COR 35,45 and Bruce 45 anchors. (Optional removable anchor roller to port)Seven Lewmar Ocean series articulated, bronze tinted ac,ylic hatches: size 70 on foredeck, size 60 in main cabin, (4) size 12 over forward cabin, aft cabin, shower, and head and (1) size 10 in aft head.White framed Bomar opening ports w/screen~ in cabin trunk and in cockpit walls for aft quarter cabin and head. Acrylic companionway hatch and two-part acrylic offshore drop-boards with inside/outside opening, lockable hasp. Four 12x20 and two 12x24 poly mesh line bags, one foredeck double line-bag. .(4) Vetus 4" dorade cowl ventilators to service forward cabin and head and main cabin. Removable stainless guards for forward dorades.316 SS swim ladder with gray PVC treads mounted on swim platform. SS step with PVC tread mounted on transom. Spars & Rigging Hall Spars carbon fiber mast of pre-preg carbon fiber autoclaved at 80 PSI at 250 deg F. Mast includes double airfoil carbon spreaders, carbon gooseneck, Awlgrip off-white finish, painted black bands, wire runs in conduit, Hall/Antal mainsailJrack with loader and end fittings to accommodate sail maker provided Antal mainsail sliders and/or boltrope. Also included with the mast are; Spartite mast wedge material, offshore tricolor/anchor light, bow and deck light with SS guard andJlag halyard cheek block at masthead and cleat at deck. Hall Spars boom of 6061-T6 aluminum with off-white Awlgrip finish, welded gooseneck fitting, lug for OuikVang internal 12:1 mainsail outhaul with external cleat, bale for mainsheet block and painted black bands. Outboard end to accommodate single line reef to starboard and 2nd clew reef to port. .Hall "J" length carbon fiber whisker pole with 2 bridles and trip line, short track on front of masJ, and two deck mounted retaining clips shipped loose for owner to locate.Navtec continuous rod rigging and N690 style open body turnbuckles with headstay -17 pre-assembled for furling system, backstay -17, uppers -17, intermediates -12, lowers -22.Harken MKIII Unit 2 size furling system with airfoil performance extrusion, corrosion proof spool and drum, tapered torque tube, AirSwivel for reduced weight aloft, cast aluminum Hardcote anodized chafe guard, and all black low stretch New England adjuster line.Hall Rigging package includes; two Technora jib halyards .and one Spectra spinnaker halyard each with Tylaska T-12 SS shackles and flemish eye terminations['2:'1 ',riain halyard of Technora with Wichard #1495 shackl~, XLS Mainsheet and two traveler control adjuster'lines, two XLS-900 Spectra genoa sheets, two Maxibraid taperedSpectra spinnaker sheets, one XLS Dacron spinnaker tack line, single 3/8" Crystalyne checkstays that can beclipped forward when not in use, burgee halyard of white 5/32" Dacron cord. Three reef lines are also included; Tack reef & clew reef #1, together, are one continuous reef line to starboard. Tack reef #2 doubles as cunningham to port. Clew reef #2 is included with it's own dedicated hardware. 2:1 Whisker pole foreguy with Schaefer 504-09 block with snap shackle.Sailtech -17 Long integral hydraulic backstay adjuster. Hall D-30 aluminum Ouik-Vang w/ Harken 30:1 cascading adjuster tackle & powerful stainless return spring to lift boom in light air and support boom with sail furled, eliminating the need for a topping lift.Custom designed 316 SS chainplates, stemhead and backstay tang. Installed Package Options Refrigeration PackageSeafrost Mechanical Refrigeration.Additional Plates & Controls for Freezer Supplementary 11OVAC Shorepower Assist. Supplementary Power PackageAdditional 210 amp Lifeline AGM Battery for total of 630 amps for house banks (location is in lieu of bottom nav station drawer).Heart Freedom 25 Inverter/Charger (in lieu of standard ProMariner 30-3 charger).Heart Echo Charger (to service engine start battery through AC system).Heart Link 2000 Battery Monitor (for (2) house battery banks).Heart Link 10 Battery Monitor (for engine battery). Supplementary Plumbing Package Vacuflush Forward Head. Dockside Water Inlet.Seagull Water Purifier in Galley. Cruising Accessory Package Cockpit Table.Companionway Screens.Espar D5LC heating system with ducting into the two sleeping cabins and main cabin.Lewmar 64CEST Two Speed Electric Primary Winches.UltraSuede or UltraLeather Covered Cushions in Main Cabin (in lieu of standard).Edson Radar Mast Thru-Deck and under-deck mounting platform (for 3.5" diameter mast). Microwave Oven in GalleySea Water Washdown in Anchor Locker.Harken Adjustable Genoa Leads.Many additional photos herehttps://docs.google.com/document/d/1QEllizB6x4FKTe3kGwlbjYaLgJMrQEg8x6PdVtIa14Y/pub Manufacturer Provided Description Great boats don’t happen overnight. Helped by new materials and techniques, they evolve from the joint experiences of designer, builder and owners to become state-of-the-art. J/46 is such a vessel, inheriting the proven hull shape of the J/44, an offshore blue water classic, having won the Fastnet, Sydney-Hobart, NYYC Queen’s Cup and Trans-Atlantic races. J/44 is the only Class of yacht ever to be given its own class start by the Cruising Club of America in the Newport-Bermuda Race. To create the J/46, a foot of sailing length is added for speed; a transom swim/boarding platform for convenience; a carbon fiber mast and low VCG 6.2’ shoal draft keel for more stability; and a resin-infused, composite hull and deck for greater strength. Below decks, the choice was clear, use the same beautifully varnished cherry or teak joiner work, entertainment center and styling so highly acclaimed in our deluxe J/160. J/46 is a maxi-Ditch yacht, the tallest yacht that can fit under the bridges of the Intra-Coastal WWaterway. Yet she is non-intimidating. A high length-to-beam ratio on the waterline of this sea-kindly yacht significantly improves tracking offshore in large waves and makes sail plan balance less critical. J/46 sails with either main or jib only, always responding predictably to a light touch on the helm. Sail power with good stability allows cruising with working jib rather than large genoa. That’s less work for the crew and improved visibility for the person on the helm. J Boats’ unique spinnaker system makes downwind sailing possible for two. A modern asymmetric spinnaker attaches to the top of the anchor roller, is contained within a cockpit-controlled snuffer, and is stored, ready-to-use, in the bow locker. The spinnaker is hoisted to the masthead, 2’ above the headstay intersect, leaving space for the snuffer to shift on a jibe. Jibing is then easy. One simply lets off one spinnaker sheet and pulls in the other.

1978 Tartan Ten 33

Toledo, Ohio

Make Tartan

Model Ten 33

Category Sloop

Posted 3 Weeks Ago

There is no hour meter - the seller estimate hours to be 200. hours The seller has outlined recent repairs and maintenance. The seller reports she is ready to go racing and/or cruising. Sail Inventory: 2012 Dieball Main Sail 2007 UK Main Sail 2000 UK Main Sail 2016 Dieball Jib 2010 North Sails Jib 2000 Sobstad Jib 1996 Doyle Boston Jib 2014 Dieball Genoa 2013 Boston Spinnaker 2010 UK Spinnaker 2007 UK Spinnaker All sails are rolled and stored inside. The seller may be able to assist with delivery. Stock #323794 1978 Tartan Ten 33 in Great Condition! Powered by a Farymann L30 Diesel Engine! Rigged w/ Upgrades & Many Sails! Great Racing or Cruising Sailboat! The Tartan Ten is a recreational keelboat designed by Sparkman & Stephens as a one-design racer with a fin keel with an internally-mounted spade-type rudder. In 1998 the Tartan Ten was inducted into the American Sailboat Hall of Fame. The design features a flush deck with modest interior space. There are 6 berths, including a V-Berth, where you will find the head. The galley has a manual pump freshwater sink, potable ice box, and chart table. She has 3 Dacron Main sails, 4 kevlar 100% jibs, 3 spinnakers .75oz nylon, 150% genoa kevlar. Cruising and club racing sails. The running rigging includes an adjustable backstay, main sheet with fine-tune, a traveler, twin lines spinnaker sheets, jib/genoa sheets, topping lift, downhaul, main halyard, jib halyard, spinnaker halyard, cunningham, outhaul, reef line, boom kicker, tiller tamer, and vang. She also has 2 Lewmar 8 single-speed cabin top winches and 4 Lewmar 30 two-speed winches. Cam cleats for the sheets. Clutches and deck organizers for halyards. Also included: Kenwood sound system with KMR-D382BT Marine CD receiver with Bluetooth, KCA-RC35 MR wired remote, and KFC-1653MRW marine speakers. - USCG safety equipment - Paddlewheel speedometer Depth sounder and transducer - Mast mounted Nautalytics digital compass with backlight. - Life sling - Tiller cover - Spinnaker pole - Above deck shroud turnbuckles The seller also has a spare mast that we can include. Reason for selling is buying bigger boat.

1972 Westerly 26 Centaur

Alderson, West Virginia

Make Westerly

Model 26 Centaur

Category Cruiser

The current owner purchased in 2000 and began the 5-10 year process the restore the boat. (Fuel economy is 1 gal/hr motoring.) Due to lack of time and getting older in age - The boat has sat on land for the last 9 years. She will need some TLC to get her back up into top condition. Stock #203644 Hard to find Westerly Centaur 26 twin keel coastal cruiser! The Westerly 26 CENTAUR = Westerly's most successful model and, in anything close to this size range, the most popular British production sailboat ever. It's thought that all are bilge/twin keelers This boat was built in England for the North Sea- strong and dry and rigged for single-handed sailing. Per the boat's owner, "I've had her at 8.5kts in a 25kt nor-easter in the Gulf of Mexico w/ reefed main and working jib at 4-5' - seas on the beam - and we did just fine! She has cruised the Ohio River system, Tennessee River, Tombigbee waterway, Florida and the Keys, Atlantic coast, ICW, NC Outerbanks, Chesapeake Bay, New England, Cape Cod, Hudson River, Erie Canal, Lake Ontario, St Lawrence River, 1000 Islands, Trent-Severn Canal, Georgian Bay, North Channel in Lake Huron, Lake Erie, AND she's trailer-able." Note the the seller has a custmized flat bed trailer available to move the boat or for purchase separately. --- KEY FEATURES / BOAT INFO --- * ALL block and tackle, boom vang, shackles, lines and sheets, fenders, spare parts, and equipment, etc.. are here and included with the boat. --- MODEL OVERVIEW --- She's a bright and airy boat w/ 2 opening ports - front hatch and screen doors for the companionway. A vented anchor rode locker fwd + over a dozen storage lockers throughout the boat for gear/parts/supplies etc.. Reason for selling is getting older - time to let her go and enjoy new hobbies.

2013 Jeanneau Sun Odyssey 379

Dania Beach, Florida

Make Jeanneau

Model Sun Odyssey 379

Category Racer Boats

2013 Jeanneau Sun Odyssey 379 2013 JEANNEAU SUN ODYSSEY 379 Antinea BUILDERS REMARKS: The Sun Odyssey 379 represents the perfect balance of ingredients that have made the Sun Odyssey range a success. The performance-oriented hull comes from the drawing boards of Marc Lombard. Special attention was given to ease of sail handling, ergonomics and modern aesthetics. A hull with a hard chine, a keel designed with the help of powerful software and a deep, powerful rudder combine to ensure the speed and stability of the Sun Odyssey 379. On deck, elongated contemporary lines, flush deck hatches and carefully studied ergonomic design details all contribute to the overall comfort, safety and feeling of well-being onboard. The Sun Odyssey 379 has been nominated for European Yacht of the Year 2011/2012 in the Family Cruiser category. You may recall that the Sun Odyssey 409 was awarded the title in the same category in 2011.In addition to the aesthetic qualities and exceptional comfort onboard, the cockpit of the Sun Odyssey boasts larger dimensions than those found aboard other boats of this size. With twin helms and sheets led aft within easy reach of the helm, luxurious cockpit tableand fold-down transom platform, the Sun Odyssey 379 offers all the attributes of a much larger sailboat. BROKERS REMARKS: ANTINEA is fine example of the sorted Jeanneau 379.  We had three for sale and ALL three sold very quickly.  Like the previous models, we expect this yacht to sell fairly quickly.  This yacht shares more DNA with a private yacht than a charter yacht, with large cabins, large head and huge cockpit storage accessible from inside the yacht.  Very easy to sail single handed, and a safe yacht for offshore family cruising. AVAILABILITY: Leaves fleet July 2017, possibility of early release.

2012 JEANNEAU Sun Odyssey 379

2012 Jeanneau Sun Odyssey 379 2012 JEANNEAU SUN ODYSSEY 379 – Chiltern Lady BUILDERS REMARKS: The Sun Odyssey 379 represents the perfect balance of ingredients that have made the Sun Odyssey range a success. The performance-oriented hull comes from the drawing boards of Marc Lombard. Special attention was given to ease of sail handling, ergonomics and modern aesthetics. A hull with a hard chine, a keel designed with the help of powerful software and a deep, powerful rudder combine to ensure the speed and stability of the Sun Odyssey 379. On deck, elongated contemporary lines, flush deck hatches and carefully studied ergonomic design details all contribute to the overall comfort, safety and feeling of well-being onboard. The Sun Odyssey 379 has been nominated for European Yacht of the Year 2011/2012 in the “Family Cruiser” category. You may recall that the Sun Odyssey 409 was awarded the title in the same category in 2011.In addition to the aesthetic qualities and exceptional comfort onboard, the cockpit of the Sun Odyssey boasts larger dimensions than those found aboard other boats of this size. With twin helms and sheets led aft within easy reach of the helm, luxurious cockpit tableand fold-down transom platform, the Sun Odyssey 379 offers all the attributes of a much larger sailboat. BROKERS REMARKS: CHILTERN LADY is one of the first and only 2012 model SO 379's models that left the fleet this summer and the only one available in Saint-Martin. Comfortable and spacious 2 cabin 1 large head layout with great sailing performance. Reliable and clean Yanmar engine. Ease of sailing single handed with jib and mainsheets lead to main primary winches by the helms. AVAILABILITY: Released from the fleet and waiting to start phase out.

2017 Beneteau Oceanis 55

Request Price

Riverside, New Jersey

Model Oceanis 55

Category Cruiser Sailboats

2017 Beneteau Oceanis 55 2017 Beneteau Oceanis 55"Luxury Cruising Sailboat"We Accept Trades!!!The Berret Racoupeau-designed Oceanis 55 officially launched in 2013; she could be considered a custom yacht without the custom price tag. Options range from a choice of three unique keels and five interior layouts by Nauta Designs ranging from three cabins and two heads all the way up to five cabins and four heads. Oceanis 55:cruising yacht with clean modern linesmany openings, and the generous volumes leading to a bright open interior5 layout plans3 keel designsTwin wheelWide beam and form stabilityElectrically-controlled transomAlpi mahogany interior

2012 Jeanneau Sun Odyssey 379

2012 Jeanneau Sun Odyssey 379 2012 JEANNEAU SUN ODYSSEY 379 – Chiltern Lady BUILDERS REMARKS: The Sun Odyssey 379 represents the perfect balance of ingredients that have made the Sun Odyssey range a success. The performance-oriented hull comes from the drawing boards of Marc Lombard. Special attention was given to ease of sail handling, ergonomics and modern aesthetics. A hull with a hard chine, a keel designed with the help of powerful software and a deep, powerful rudder combine to ensure the speed and stability of the Sun Odyssey 379. On deck, elongated contemporary lines, flush deck hatches and carefully studied ergonomic design details all contribute to the overall comfort, safety and feeling of well-being onboard. The Sun Odyssey 379 has been nominated for European Yacht of the Year 2011/2012 in the “Family Cruiser” category. You may recall that the Sun Odyssey 409 was awarded the title in the same category in 2011.In addition to the aesthetic qualities and exceptional comfort onboard, the cockpit of the Sun Odyssey boasts larger dimensions than those found aboard other boats of this size. With twin helms and sheets led aft within easy reach of the helm, luxurious cockpit tableand fold-down transom platform, the Sun Odyssey 379 offers all the attributes of a much larger sailboat. BROKERS REMARKS: CHILTERN LADY is one of the first and only 2012 model SO 379's models that left the fleet this summer and the only one available in Saint-Martin. Comfortable and spacious 2 cabin 1 large head layout with great sailing performance. Reliable and clean Yanmar engine. Ease of sailing single handed with jib and mainsheets lead to main primary winches by the helms. AVAILABILITY: Available now.

Narrow Results

Current search reset all.

• Keyword: twin keel sailboat
• Jeanneau (5)
• Beneteau (2)
• BENETEAU (1)
• Com-Pac (1)
• HERITAGE YACHT CORP (1)
• J Boats (1)
• Westerly (1)
• Sailboats (4)
• Cruiser Motorcycles (3)
• Racer Boats (3)
• Cruiser (1)
• Cruiser Sailboats (1)
• Pilothouse Boats (1)
• Florida (5)
• New York (3)
• New Jersey (2)
• Colorado (1)
• Massachusetts (1)
• Michigan (1)
• Pennsylvania (1)
• Rhode Island (1)
• Washington (1)
• West Virginia (1)
• Šibensko-kninska (1)
• POP Yachts (2)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

2006 Yamaha SX210

Lake Havasu City, AZ

2021 Sanger 237 SX

Simi Valley, CA

2013 Sea Hunt Gamefish 29

Baytown, TX

2018 Boston Whaler 230 Vantage

Norfolk, VA

2003 Grady-White Marlin 300

Harrison Twp, MI

2015 Boston Whaler 240 Dauntless

New Orleans, LA

2017 Sportsman Masters 227 Bay Boat

Charleston, SC

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

• Boats for Sale

Aluminium boat for sale (sail)

• Aluminium boat

What is an aluminium sailing boat?

As the name suggests an aluminium sailing boat is one constructed from aluminium (also know as aluminum in the United States). Aluminium is a stronger metal than the same weight of steel, so aluminium boats can be lighter in weight whilst still being strong, which is an advantage for sailing boats, especially those used for racing where lower weight equals more speed. There are a few disadvantages too though, for example, aluminium does corrode, and more so in saltwater, so aluminium boats need repainting every couple of years and you will need a sacrificial anode.

Which manufacturers build aluminium sail boats?

Manufacturers that produce aluminium sail boats include Alubat , Jongert , Garcia , Nordia and Royal Huisman .

How much does an aluminium sail boat cost?

A used aluminium sail boat on TheYachtMarket.com ranges in price from £153,000 GBP to £4,260,000 GBP with an average price of £1,080,000 GBP . Factors including the condition, age, model and specification will affect the price of an aluminium boat.

Sign up to our newsletter

By submitting this form, you agree to our Privacy & Cookie Policy

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:

Show lengths, beam and draft in:

Show displacement or weight in:

Show capacity or volume in:

Show speed in:

Show distance in:

• {{>productsMenu}} Products
• {{>trendsMenu}} News & Trends
• Sailing >
• Monohull sailboats >
• Twin keels sailboat

Twin keels sailboats

• My filters twin keels Delete all

Manufacturers

• BORD A BORD  (1)
• Marée Haute  (2)
• META Yachts  (4)
• Northman Krysztof Stepniak  (1)
• Pogo Structures  (1)
• RM Yachts  (2)
• Sirius Werft GmbH  (1)
• Windelo  (5)

Number of hulls

• monohull (12)
• multihull (5) catamaran

Intended use

• cruising (17) fast cruising ocean cruising coastal cruising
• cruising-racing (7)
• expedition (4)
• racing (3) ocean racing coastal racing

Overall length

Displacement, motor power, fuel capacity, fresh water capacity, number of cabins.

• 2-cabin (9)
• 3-cabin (9)
• 4-cabin (5)
• 1-cabin (2)

Number of beds

• 6-berth (13)
• 10-berth (5)
• 4-berth (5)
• 8-berth (5)
• 7-berth (2)
• 3-berth (1)
• 5-berth (1)

Deck layout

• with open transom (13)
• with center cockpit (7)
• with enclosed cockpit (6)
• with deck saloon (2)
• wheelhouse (1)
• aluminum (5)
• fiberglass (3)
• twin keels (17)
• lifting keel (9)
• fixed keel (9)
• twin rudders (7)
• with bowsprit (10)
• carbon mast (1)

Other characteristics

• semi-custom (9)
• hybrid diesel-electric propulsion (7)
• electric drive (6)
• twin steering wheels (6)
• unsinkable (2)
• self-righting (2)
• with ballast (1)
• for family use (1)
• sail-drive (1)
• transportable (1)

& reach your clients in one place, all year round

{{product.productLabel}} {{product.model}}

{{#each product.specData:i}} {{name}} : {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

{{{product.idpText}}}

cruising sailboat 30

Overall length : 9.1 m Width : 3.7 m Draft : 1.9 m

... a fibreglass sandwich hull for greater stiffness, making for a cleaner structure. Choice of a bulb keel inspired by the Pogo40S², or a deep swing- keel (to slip into anchorages). Optionally available ...

cruising sailboat 39

Overall length : 12.55 m Width : 4.4 m Draft : 1.7 m

... providing an excellent view of the water. Your META The META 39 is available in a twin keel version and is particularly well adapted to the TurboKeels® system ( twin keel ...

cruising sailboat META 43DS

Overall length : 14 m Width : 4.52 m Draft : 1.4 m

... engine room under the floor of the day area. The META 43DS Legacy is available in a twin keel version and is particularly well suited to the TurboKeels® system ( twin keel ...

ocean cruising sailboat 33

Overall length : 10 m Width : 3.7 m Draft : 1.71 m

... exploration projects. From coastal weekends to round-the-world voyages, there's no stopping it! Its size makes it an all-men sailboat without cutting back on the comfort, habitability and of course the safety that characterizes ...

cruising sailboat 35DS

Overall length : 10.6 m Width : 3.48 m Draft : 1.98 m

... harbour so you can take in your surroundings whatever the weather. She’s available with two fin keels (one deep fin or one shallow fin), twin keels or a lifting keel . After ...

fast cruising sailboat RM890+

Overall length : 8.9 m

... comes to her shape and sporty look. Her seaworthiness remains intact on the RM890+, clearly an easy to handle lively sailboat , , should it be in light airs or in a gusty breeze. A comfort concentrate Below deck ...

ocean cruising sailboat RM1070

Overall length : 10.7 m

Perfect combination of elegance, comfort and functionality, the RM1070 reveals at first glance very attractive lines

cruising sailboat Maxus 26

Overall length : 8.4 m Width : 2.82 m Draft : 0.35, 1.43, 1.7, 1.25, 1.6 m

Maxus 26, as the only Polish yacht in the “Family Yacht” category, has been nominated for the prestigious “European Yacht of the Year 2016″ award. The yacht completes the shipyard’s offering in Poland’s most popular size segment. Maxus ...

fast cruising sailboat DJANGO 9.80

Overall length : 9.8 m Width : 3.6 m Draft : 1.6 m

The Django 9.80 is the ideal saiboat for all those who dream of taking a beak and getting away from it all, with their family, their friends or solo.

catamaran 50 YACHTING

Overall length : 15.24 m Width : 7.92 m Draft : 2.32, 1.03 m

YACHTING SPIRIT Presentation Yachting is the most luxurious boat offering high-end materials and equipments : from the comfort of the furnishings to the quality of the materials. Its basic equipment and available options are going ...

cruising sailboat IROISE 48

Overall length : 14.67 m Width : 4.76 m Draft : 1.8 m

The layout of the Iroise 48 has been speciallydesigned to provide maximum confort for all passengersTheinteriorcomeswith a forwardcabin, a berthwith a desk, a bathroomwithseparatetoilet, and a large sailspeak. The fittedkitchen has a ...

Your suggestions for improvement:

Please specify:

Help us improve:

Receive regular updates on this section.

Please refer to our Privacy Policy for details on how NauticExpo processes your personal data.

• Sailing yachts
• Sailing super-yachts
• Twin keels sailing yachts
• Marine upholstery fabrics
• Snap shackles
• Pogo Structures sailboats
• Manufacturer account
• Buyer account
• Our services
• Newsletter subscription
• AboutVirtualExpo Group

RM Yachts: French plywood sailboat manufacturer

Over 30 years of plywood yacht building expertise.

Welcome to RM Yachts!

French sailboat manufacturer since 1989, our shipyard based in La Rochelle is specialised in the construction of fast cruising yachts of 30ft to 45ft in plywood and epoxy – approximately 9 to 14 meters.

Whether you are looking for a coastal cruising sailboat, or planning longer open sea trips, such as Atlantic, Pacific crossing, or round-the-world sailing, there will always be an RM yacht fitting your project.

We are actually the sole shipyard and manufacturer having built over 500 monohull sailboats using this material and this sailing yacht building technique. Needless to say, we know plywood-epoxy in-and-out.

This material’s benefits are numerous: lightness and stiffness, for increased performance under sail, and a dry and sane interior atmosphere, thanks to its thermal and phonic specifications.

Not to mention its reduced impact on the environment, compared to other materials usually found in naval construction (GRP, polyester, etc.).

Designed by award-winning architect Marc Lombard, RM yachts are 100% made in France, and then sail around the world. Our clients frequently share their anecdotes and logbooks from their solo or family adventures on our modern sailing boats.

Available in different appendage versions (single-keel, twin-keel, lifting-keel, single or twin rudder), RM Yachts are customisable, starting with their hull colour and interior design.

Advising you to choose the best cruising sailboat

Thanks to our many years of experience as a sailing yacht manufacturer, we have designed our website to provide you with all the information you need to select your next cruising yacht :

• What is important when choosing a cruising sailboat?
• What is the best size for a coastal or bluewater cruising yacht?
• How to choose the best sailboat to live on?
• What options are to be considered when preparing an ocean crossing or a circumnavigation?

Our F.A.Q. section is also a great source of information to help you find the ideal sailing boat according to your needs and sailing plans.

You are more than welcome to visit our premises, and we can also set up a sea trial! Our team will be more than happy to help you configure your brand-new sailing yacht

Alternatively, you can also have a look at our previous models and see how high our used monohull sailboats are on the market. Our expert brokers remain available for additional information.

Finally, acquiring an RM also means you have access to a panel of services, provided by Grand Large Yachting group’s dedicated subsidiary: Grand Large Services. Whether it’s about training lessons, spare parts, maintenance, or refit before slipping lines, our specialists are here to help!

Bring your own dreams, we’ll take care of everything else.

Looking forward to meeting you soon,

The RM Yachts team.

Keep in Touch' Restons en contact

We will send you RM Yachts News (Only) to make sure you are up to date. Recevez (seulement) nos infos, pour être sûrs de ne rien rater !

• FR - Français
• EN - English

What are the pros and cons of different keels?

We all sail for different reasons, in different cruising grounds and use our yachts differently, so it makes sense that there is no one-size-fits-all keel design. At Sirius, however, we like to make the perfect yacht for each individual owner. One of the ways we serve our customers is our choice of keels – at least six different options for each model. It’s one of the ways we stand out – or should that be stand up?

We offer three styles of keel: fin, twin and lifting swing keel. All of our keels excel in many ways, but every design does have drawbacks – this is not unique to Sirius, but the keel affects the way you use the boat, so it’s important to choose the right one for you.

These are the keels we currently offer:

Standard Fin (310DS, 35DS, 40DS) Performance Fin (310DS, 35DS, 40DS) Medium Fin (310DS, 35DS, 40DS) Shallow Fin (310DS) Shallow Twin (310DS, 35DS, 40DS) Performance Twin (35DS, 40DS) Lifting Swing Keel (310DS, 35DS, 40DS)

Does the choice of keel compromise ocean capability?

For Sirius yachts, absolutely not. It’s important to realise that choosing one keel style over the other does not affect the yacht’s righting moment or compromise its ocean-going capabilities at all!

Whichever keel you choose, deep or shallow, twin or fin, they all have the same stability. This is achieved by putting more weight in the bulbs of the shallower keels as the shorter lever can be balanced with higher weight. Most of the blue water cruising and circumnavigations in Sirius Yachts have been made with twin-keel or reduced/shallow fin keel yachts.

Does keel choice affect performance?

As our shallow keels are heavier the weight dampens the yachts’ motion at sea, but as a downside, you have more weight to move with sails or engine. Once you’re moving there isn’t a difference but when tacking or gybing, or when not steered well, you will lose a bit in sailing performance. The shallower draught yachts also lose a few degrees to windward compared to their deeper keeled sisters, but they are still good all-round performers. Our customers with racing backgrounds always try to go for a keel as deep and light as their sailing area permits, either with a single or twin keel.

Pros and cons of fin keels

The standard keel on our yachts is a fin keel. Most sailing boats today use a fin keel because it gives a good all-round performance on all points of sail. By keeping the ballast lower it gives the most comfortable motion. The main downsides are that the draught (the depth of water required to stay afloat) is the greatest, and it’s very important to avoid running aground on a falling tide. Fin keel boats cannot dry out without additional support, either from a harbour wall or by fitting a pair of beaching legs. Some fin keel yachts are not built strongly enough to stand on their keels when out of the water, so they can’t dry out alongside a harbour wall and they need to be kept in a special cradle when stored ashore to avoid the risk of the hull deforming under its own weight. By contrast, all Sirius yachts can stand on their keels for any length of time with no problem at all.

We offer four types of fin keel. The standard fin is available on the 310DS, 35DS and 40DS and is fully cast-iron. It offers the best value, good performance, and excellent responsiveness. It is the deepest of our fixed-keel options, so if you want less draught you may want to look at our other fin keels.

We also offer a performance fin keel for all our models. This uses a cast iron fin with a lead bulb at the tip (bottom). The structural strength of cast iron means the fin is the slimmest profile, but lead is denser than iron so the same volume of lead will weigh around 1.4 times more than cast iron, giving more righting moment. The heavier, softer lead down low has less volume in the bulb so achieves a slimmer profile with less drag and therefore better performance.

A lead bulb is also safer if it hits something. Lead can absorb 60% of the energy in flexing and deformation so that only 40% of the force will be transferred to the laminated structure of the keel reinforcement. A lead bulb is very forgiving and easy to reshape and will not start to rust where the coating is damaged. We can use less volume of lead than iron, and achieve better stability than a wholly cast-iron keel. We can also reduce the depth of the keel and retain excellent stability. However, lead is more expensive than cast iron and the bulb must be attached very securely to the iron fin, so this option does cost more.

If you want less draught, we also offer a medium fin. This reduces the draught of the 310DS and 35DS by around 40cm/1ft 4in and 55cm/1ft 9in on the 40DS. Like the performance fin, it uses a cast iron fin with a lead bulb. To retain the keel’s grip in the water it has to have a longer chord (the distance from fore to aft). While this gives the boat better directional stability, it does make her a little less responsive and a little slower to manoeuvre.

On our 310DS, we offer a shallow fin option – a special version for very shallow cruising grounds. This fin keel offers the least draught of any of our fixed keel options at 1.15m/3ft 9in and draws 10cm/4in less than the twin keel version. The keel has a significantly longer chord (2.24m/7ft 4in compared to 0.7m/2ft 3in of the standard keel) so she has the reassuring directional stability of a long-keeled yacht but with better manoeuvrability.

Pros and cons of twin keels

Our twin keels are the most popular option. About 70-80% of all Sirius Yachts are delivered with them – and on the 40 DS it’s 90%. Some folk still believe there is a big performance penalty with twin keels. In the past this used to be true but it’s no longer the case with modern twin keel designs, from Sirius at least. We have conducted many two-boat comparison tests, often battling for hours, by ourselves, with owners, and for sailing magazines and we have found that there may only be one or two boat lengths of difference at the end of a long windward leg, if at all. At the end of many of these comparison tests, the crews could not point out which of the boats had the twin keel.

If you cruise tidal areas, twin keels will reward you time and time again. Not only do they give you a shallower draught than the typical fin keel, they also give you the ability to dry the yacht out, whether that’s for a motion-free night’s sleep, to explore cruising grounds others cannot reach, or just for cheaper mooring and maintenance costs.

We offer two styles of twin keels; performance and shallow draught. Both options have a cast iron fin with a lead bulb. The performance keels have a deeper draught and a thinner chord so they act and feel a bit livelier when sailing and manoeuvring. The shorter keels have a longer chord, but give you the ability to navigate shallower areas. Like all keel designs, twin keels do have some downsides. They are more expensive than fin keels, and when you’re sailing fast in choppy seas at a steep angle of heel, you can occasionally get a slapping sound when an air pocket is caught and pressed out under the windward fin. Lastly, we’ve yet to meet an owner who enjoys antifouling between the keels. Thankfully it only has to be done once a year and with twin keels you might get away with doing it less frequently. A twin keel yacht can be kept on a drying mooring, where fouling is reduced because the hull spends more time out of the water. And when you’re off cruising it’s easy to give the bottom a quick scrub while the yacht is dried out.

Our yachts will happily sit on their keels on a hard surface, like a drying grid, or for winter storage but on softer surfaces we use the rudder for additional support. The rudders on our twin keel yachts are specially reinforced for this: we use a Delrin sheave to take the weight of the hull and the tip of the rudder has a wide, foil-like foot to spread the weight.

A lifting swing keel

We are one of a few manufacturers to offer a lifting swing keel. There’s a lot of confusion with the term ‘lifting keel’, it seems to encompass all yachts that have centreboards, variable draught, lift-keels or swing keels. To us, a lifting keel boat should have all the ballasted weight of the boat in the keel, and that keel needs to be retracted into the hull.

Technically, a lifting keel is a keel that can be lifted or lowered and gives the boat the ability to dry out when the tide goes out. A lift-keel is a ballasted keel that raises and lowers vertically. A swing keel has a ballasted fin that has a single pivot point and the keel swings up into the boat. There are other variants of design, for example some have a lifting keel to reduce the draught of the vessel but they cannot dry out on it, others have a ballasted keel and ballasted grounding plate. All these examples have a keel that does two things: keep the boat upright and stop her sliding sideways. Our swing keel is designed with a NACA profile to give the most efficient performance.

Centreboard yachts have a centreplate to provide grip in the water and reduce leeway. The plate may carry only 15-20% of the ballast but the rest of the yacht’s ballast is within the hull and/or in the grounding plate. This is called an “integral keel” and is more common as it’s less complicated to build. The lower a yacht’s ballast is located, the better her stability, the more comfortable her motion and the better she stands up to her sail area. The most efficient place for the ballast is as low down on the deepest keel possible – this is why race boats have deep skinny keels with large torpedo-shaped bulbs on the bottom, but they don’t make practical cruising sailboats.

Our keel designs have more weight in the tip (bottom) – using a bulb on the fin and twin keel design and flaring the lower sections on our lifting swing keel yachts. You don’t have this with centreboard and integral keel yachts.

It might be surprising, but a lot of owners come to us thinking that a lifting swing keel is the best option for them. Sometimes it is, but about 98% of customers who approach us because we offer swing keels end up sailing away on a twin-keel Sirius.

The downsides of a lifting keel

A lifting swing keel does give you more cruising options. It will lift should you run into something and, of course, it gives you the shallowest draught. But that difference is only 40-50cm (1ft 4in to 1ft 8in) less draught than our shallow twin keel option. The lifting keel increases the complexity of the build and the final cost of the yacht; it also sometimes limits the internal layout and engine drive options, and you need to have twin rudders too. Twin rudders make the boat less manoeuvrable in a marina – you can opt for a third central rudder which does improve the handling, but again comes at an extra cost.

On the lifting swing keel, 40 and 310 owners are restricted to the use of a shaft drive, which is less efficient and you have to accept a bit more noise and vibration. When drying out, the drive is more vulnerable to damage, whereas it’s totally clear when taking the ground on twin keels. With twin keels, you also do not have to worry about something sticking out of the beach or stones lying around because the hull is high above the ground. With the hull up high, you do not have to dig a hole in the sand and slide down on your stomach to check or change your anodes as you would on a swing keel.

Sailors who are attracted to the idea of a lifting swing keel should carefully consider the pros and cons to compromise the least. When owners understand the repercussions of choosing a lifting keel yacht, many of them feel it restricts their options too much. They could have a lifting keel or they can sail with twin keels, dry out, have better close-quarters handling and save money in the process. Unless you need the shallowest possible draught – 0.75m (2ft 5in) on the 310DS, 0.9m (2ft 11in) on the 35DS or 0.95m (3ft 1in) on the 40DS – a twin keel might well be a better option.

How are the keels attached?

The design of the keel is important but the way they are attached is just as important, if not more so. All of our fixed keels are through-bolted. Every keel has a wide flange at the root (top) of the keel and the flange sits into a reinforced recess in the hull. The flange and the recess work together to spread the loads of the keel/s into the yacht’s hull. The keels are bonded and bolted to the hull. We use up to twelve 20mm and 24mm bolts (per keel) and these go through rolled stainless steel backing plates inside the hull to spread the bolt loads evenly into the fully laminated keel grid which goes all the way up to the chainplates and also carries the mast support.

For our lifting swing keel, we laminate a substantial keel box as part of the hull to accept the keel and the hydraulic mechanism needed to retract the keel into the hull. Unlike most other boatbuilders we don’t use a grounding plate to take the weight of the yacht, our yachts sit on the length of the leading edge of the keel. Integral keels with the majority of the ballast in the grounding plates move the ballast (weight) from low down in the keel to inside the hull. This negatively affects the stability as the more weight you have lower down, the better.

We also don’t like grounding plates because they bring the hull in contact with the ground. By leaving 10-15 cm (4-6in) of the keel out of the hull when it’s retracted, most of the time the hull is kept clear of the beach and anything that could damage it.

The problem with too much form stability

With only 15-12% of their ballast in the centreboard, most lifting-keel yachts cannot rely on keel weight for stability so their hulls need to be designed with extra form stability instead. This means the hull sections have to be much wider and flatter. A flat-bottomed hull is not what you want for a comfortable ocean cruising yacht; it isn’t sea-kindly or easy to steer in waves and gusty winds conditions. We don’t make that compromise at Sirius. With all the ballast in the swinging part of our swing keel design, we can use the same seaworthy, ocean-capable hull shape designed for our yachts with fixed keels.

If you don’t know which keel would be best for your Sirius, contact us to discuss the type of sailing you intend to do, where you want to sail and what your cruising aspirations are.

General Manager – Torsten Schmidt SIRIUS-WERFT GmbH Ascheberger Straße 68 24306 Plön/Holstein

Fax: 0049 – 4522 – 744 61-29

Receive regular updates from Sirius Yachts

Subscribe to our email newsletter

Privacy Overview

Merlin 28 Twin keel

Sailboat specifications.

• Last update: 25th March 2020

Merlin 28's main features

Merlin 28's main dimensions, merlin 28's rig and sails, merlin 28's performances, merlin 28's auxiliary engine, merlin 28's accommodations and layout.

Similar sailboats that may interest you:

13 Most Popular Swing Keel Sailboats Worth Considering

A swing keel sailboat allows you to explore shallower waters and launch your boat at shallow ramps with greater ease than a fixed keel. Additionally, swing keel sailboats are typically more affordable than fixed keel sailboats. In this article, we will introduce you to the 13 most popular swing keel sailboats that you may want to consider.

The 13 most popular swing keel sailboats that you may find worthy to consider are the following: Catalina 22, MacGregor 26, Hunter 22, Precision 23, O'Day 22, Beneteau First 235, Seaward 25, Islander Bahama 24, Watkins 27, Com-Pac 23, Montgomery 17, San Juan 23, and West Wight Potter 19.

The estimated pricing for the boats with swing keels ranges from $5,000 to $40,000. Let's take a look at which models are the most affordable and which are priced higher.

• Catalina 22 has a swing keel that is made of lead and can be raised and lowered using a winch system.
• The MacGregor 26 has a water ballast system in addition to its swing keel, which provides additional stability and helps keep the boat upright in rough conditions.
• The San Juan 23 is a fast and responsive swing-keeled sailboat that has a sail area-to-displacement ratio of 18.8.
• The Watkins 27 is a fast swing keel sailboat that has a reported top speed of around 7 knots.
• The O'Day 22 features a swing keel that is retractable and allows it to sail in waters as shallow as 2 feet.

On this page:

Catalina 22, macgregor 26, precision 23, beneteau first 235, islander bahama 24, san juan 23, west wight potter 19, montgomery 17.

Below is a table summarizing why each of these swing keel sailboats is worth considering, as well as their estimated market price in case you'd proceed with buying them:

The Catalina 22 is a popular sailboat model that has been in production since 1969. It is known for its versatility, ease of use, and affordability. One of the key features of the Catalina 22 is its swing keel, which allows it to be easily trailered and launched in shallow waters.

The swing keel on the Catalina 22 is made of lead and is attached to a cable that runs through a slot in the hull. The keel can be raised and lowered using a winch system, which allows the boat to navigate in shallow waters or be easily transported on a trailer.

When the keel is lowered, it provides stability and helps the boat sail upwind. When the keel is raised, the boat can be easily maneuvered in shallow waters or on a trailer.

This makes the Catalina 22 an ideal sailboat for those who want the flexibility to sail in a variety of conditions and locations. Catalina 22 is also a very affordable swing keel sailboat option. If you're curious about how much it costs to buy and own a sailboat , you can take a look at our article.

The MacGregor 26 is a popular trailerable sailboat that was first introduced in 1986. One of its unique features is the swing keel water ballast system, which allows the boat to be easily transported on a trailer and launched at various locations.

The swing keel is a retractable keel that can be raised or lowered depending on the water depth. When it is lowered, it provides additional stability and helps the boat track better through the water. When it is raised, the boat can be easily transported on a trailer.

The water ballast system is another unique feature of the MacGregor 26. The boat has two water tanks located on either side of the keel, which can be filled with up to 1,500 pounds of water. This water ballast provides additional stability and helps keep the boat upright in rough conditions.

If you're interested to know more about how sailing ballasts work , here's an article that can give you more information.

The Hunter 22 with a swing keel is a great sailboat for those who are looking for a versatile and easy-to-handle vessel. The swing keel allows the boat to navigate in shallow waters and provides better stability in deeper waters, so it is ideal for those who enjoy sailing in a variety of conditions and locations.

In addition, the Hunter 22 is a relatively affordable sailboat, making it a great option for those who are just starting out in sailing or who want to own a sailboat without breaking the bank. It is also a popular choice for families, as it can comfortably accommodate up to four people.

The Hunter 22 has a rich history, with the first model being introduced in 1973. Since then, the boat has undergone several design changes and upgrades, with the current model featuring modern amenities and technology.

The Precision 23 is a popular swing keel sailboat that is well-regarded for its versatility and performance. The swing keel design allows the boat to be easily launched and retrieved from a trailer.

One of the benefits of the Precision 23's swing keel design is its ability to sail in shallow waters. With the keel up, the boat has a draft of just 1'8", which allows it to navigate in areas that would be inaccessible to deeper-draft boats, such as coastal areas, bays, and estuaries.

When the keel is lowered, the Precision 23 has a draft of 5'0", which provides excellent stability and performance under sail. The boat is designed to be easy to handle, with a simple rig that is easy to set up and adjust. The spacious cockpit provides plenty of room for the crew to move around, and the cabin is well-appointed with all the amenities needed for comfortable cruising.

The O'Day 22 features a swing keel that is retractable and can be raised or lowered depending on the depth of the water. This feature allows the O'Day 22 to sail in waters as shallow as 2 feet, making it ideal for exploring shallow coves and bays.

This sailboat has a spacious cockpit, making it comfortable for day sailing or weekend trips. The cabin is compact but efficient, with a small galley, a portable toilet, and sleeping accommodations for up to four people.

The O'Day 22 is a popular choice for sailors of all skill levels, from beginners to experienced sailors. Its ease of use, versatility, and affordability make it a great choice for anyone looking for a reliable and fun sailboat.

The Beneteau First 235 is a popular sailboat that was first introduced in the early 1980s. It is a swing keelboat, which means that it has a retractable keel that can be raised or lowered depending on the depth of the water.

The boat is 23.5 feet long and has a beam of 8 feet so it is a relatively small boat that is easy to handle. It has a displacement of around 2,500 pounds, making it light, and can be easily towed behind a car.

The Beneteau First 235 is a popular boat because it is a well-designed and well-built sailboat that is both fast and easy to handle. The boat has a relatively narrow beam, which allows it to cut through the water with less resistance and achieve higher speeds.

Additionally, the boat has a relatively large sail area, which means that it can catch more wind and generate more power. The boat's hull shape is also optimized for speed, with a deep V-shaped hull that helps to reduce drag and increase stability. Deep-V hulls are one of the most stable boat hull designs .

The Seaward 25 is a swing-keeled sailboat that was designed by Hake Yachts and is popular among sailors who are looking for a versatile and easy-to-handle boat for both cruising and racing.

In addition to its swing keel, the Seaward 25 is also known for its spacious and comfortable interior. The boat has a large V-berth and a convertible dinette that can comfortably sleep up to four people. The boat also has a galley with a sink and a stove, as well as a private head with a marine toilet.

Another reason why the Seaward 25 is popular is because of its speed and maneuverability, making it a great choice for sailors who want to race or cruise at a fast pace. The boat is also relatively easy to handle so it can be sailed even by beginners.

The Islander Bahama 24 is a popular swing keel sailboat designed by Robert Finch and built by Islander Yachts from 1977 to 1982. It is a small, versatile sailboat that is great for day sailing, weekend cruising, and even racing.

The Bahama 24 has a spacious cockpit that can comfortably seat four people, and its interior is surprisingly roomy for a boat of its size. It has a V-berth forward, a dinette that converts into a double berth, and a quarter berth aft. There is also a small galley with a sink and a portable stove, as well as a marine head.

The Bahama 24 is a solid performer. It has a moderate sail area and a well-balanced rig, which makes it easy to handle in a variety of wind conditions. It is also known for its stability and its ability to sail close to the wind.

The Watkins 27 is a popular swing keel sailboat that was manufactured in the United States by Watkins Yachts from the mid-1970s to the early 1980s. It was designed by Walter Scott and is known for its spacious interior and good sailing performance.

The Watkins 27 has a length overall of 27 feet and a beam of 9 feet, 4 inches. It has a displacement of around 6,000 pounds. The boat has a spacious interior with a comfortable salon, galley, head, and sleeping accommodations for up to six people.

In terms of sailing performance, the Watkins 27 is known for being a good all-around performer. It has a moderate sail plan and a relatively low aspect ratio, which makes it easy to handle and forgiving for novice sailors. It is also a reasonably fast boat, with a reported top speed of around 7 knots.

The Com-Pac 23 is a popular swing keel sailboat that has been in production since the early 1980s. It is a versatile boat that can be used for cruising, racing, and day sailing. It is also a fast boat that can easily reach speeds of 6-7 knots in moderate winds.

The Com-Pac 23 has a spacious cockpit that can comfortably seat up to six people. The boat is also equipped with a cabin that can sleep up to four people and has a galley with a sink, stove, and icebox. The headroom in the cabin is generous for a boat of this size, and the layout is designed to maximize space and comfort.

The San Juan 23 is a popular swing keel sailboat that was first introduced in the early 1970s. It was designed by Bruce Kirby and built by Clark Boat Company in Kent, Washington. The boat was designed to be a versatile and affordable sailboat that could be used for cruising, racing, and day sailing.

Another feature that makes the San Juan 23 popular is its spacious cockpit and comfortable interior. The boat can accommodate up to four people and has a small galley, a head, and a V-berth. The cabin is well-ventilated and has plenty of natural light, making it a comfortable place to spend time below deck.

The San Juan 23 is a fast and responsive sailboat. It has a sail area-to-displacement ratio of 18.8, which means that it can achieve high speeds even in light winds. The boat is also very stable, which makes it easy to handle in rough conditions.

The West Wight Potter 19 is a popular swing keel sailboat that has been in production since the early 1970s. It is known for its versatility, durability, and ease of use, making it a popular choice among sailors of all skill levels.

Aside from its swing keel, it also has a relatively wide beam and a low center of gravity, which helps to keep it stable in a variety of conditions. The cockpit is spacious and comfortable, with plenty of room for passengers and crew.

In terms of performance, the West Wight Potter 19 is not the fastest sailboat on the water, but it is known for its ability to handle a variety of conditions. The boat is easy to sail and can be handled by a single person, so it is great for solo sailors or couples.

The Montgomery 17 is a popular sailboat designed by Lyle C. Hess and built by Montgomery Marine Products. One of the unique features of this sailboat is its swing keel, which allows it to be easily transported on a trailer and launched in shallow waters.

The Montgomery 17 has a classic design with a cabin that can sleep up to four people. It has a simple rigging system that makes it easy to sail, even for beginners. The sailboat is also known for its durability and has been used for long-distance cruising and racing.

Leave a comment

You may also like, what is a swing or lifting keel 14 pros and cons explained.

If you need to know what a swing keel is, like me, this article is for you. I'm trying to decide what keel type is right for me, so I dove into the swing keel.

Centerboard (Swing Keel) vs. Fixed Keel: Pros and Cons

Sailboat keel types: illustrated guide (bilge, fin, full).

13 Popular Trailerable Sailboats with Lifting Keels

What's the Best Keel Design for Bluewater Sailing?

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to: