yachtcare epoxy filler

• Polyester resin
• Lacquers and paints
• Silicone rubber
• Floor systems
• Boat maintenance
• Silicone moulds
• Glass fibre
• Adhesives and sealants
• Roof repair
• Personal protection
• Auxiliary materials
• Polyurethane resin
• Carbon and aramid fabrics
• Core material
• Vacuum materials
• Empty packaging
• Bargain corner
• Shopping cart 0
• Shopping cart
• Expert advice
• Customer service: +31 (0)85 022 00 90
• Advice via WhatsApp: +31 (0)85 130 59 32

Yachtcare Epoxy Fiber Filler

• Description
• 2-component epoxy filler
• For above and below the waterline
• High water resistance

Yachtcare Epoxy Fiber Filler is a universal, solvent free, 2-component fine filler based on epoxy and compounded with special fibres. The grey-coloured putty is waterproof and can be employed above or below the water on alle surfaces sealed with any kind of epoxy primer. This makes the filler appropriate for the maritime industry. 

Benefits of Yachtcare Epoxy Fiber Filler

• For use above and below the waterline.
• High water resistance.
• Easy to use.

Instructions for use

Yachtcare Epoxy Fiber Filler is very easy to use. Make sure the surface is clean, dry, grease-free and free of dirt before you start filling. Also remove loose or poorly adhering parts. Mix the base and hardener in the specified mixing ratio of 2:1 parts by weight. Mix until a homogeneous, light grey colour is obtained. We recommend making only a quantity that you can process within 15 minutes. Apply a maximum of 2 cm of putty per layer. Is a higher layer thickness desired? Then sand the last layer first before applying a new layer of putty. The maximum overpainting time between 2 layers of putty should not exceed 24 hours (+20°C).

The minimum processing temperature of Yachtcare Epoxy Fiber Filler is 10°C. After mixing, it must be processed within 30 minutes at an ambient temperature of 20°C. You can accelerate the curing of the applied product if desired by adding heat to a maximum of 60°C.

Contents: 500 grams, 2 kg Colour: light grey Brand: Yachtcare Mixing ratio: 2:1 (weight) Standard layer thickness: max. 2 cm Minimum processing temperature: 10°C Pot life: 30 minutes (20°C) Sandable after : 6 hours (20°C) Overpainting time with primer:

• min. 12 hours (20°C)
• max. 24 hours (20°C)

Fully cured: after 5 days Yield: 1.1 m2/kg Specific gravity: approx. 1.78 g/ml

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

• MSDS - Yachtcare Epoxy Fiber Filler (A)
• MSDS - Yachtcare Epoxy Fiber Filler (B)

Product Choices

Receive a back in stock email.

• Extensive range!
• PayPal, Mastercard, Visa, American Express
• Fast reliable delivery in Europe (1-5 days)
• Free advice from a specialist!

We will be happy to give you advice!

Customers who bought yachtcare epoxy fiber filler also bought:

Mixing cups

• 4 different sizes
• Readable scale in ml

Waterproof sandpaper per sheet

• 80 up to 3000 grit
• Sheet 230 x 280 mm
• Delivery per sanding sheet

Variopox injection resin

• Very thin-flowing epoxy
• Penetrates deeply into wood
• Can be used as a primer coat

De IJssel Yacht Varnish

• Traditional 1-component varnish
• In high gloss or silk gloss
• Full rich gloss

Foam roller

• Streak-free finish
• Perfect for DD paint
• Fine quality

• Boats & Motors
• Boat Equipment
• Boat electrics & electronics
• Navigation & Boat radio
• Sailing Clothes & Sailing Bags
• Water sports
• Books & Gifts

Yachtcare Epoxy Base Filler

Prices incl. VAT plus shipping costs

No longer available

• Description Yachtcare Epoxy Base Filler is a solvent-free, 2-component epoxy filler that can be used in underwater and above-water areas… More

Yachtcare Epoxy Base Filler is a solvent-free, 2-component epoxy filler that can be used in underwater and above-water areas on all surfaces sealed with epoxy primers. It is characterized by excellent water resistance and good sandability. The Epoxy Base Filler can be applied in a layer thickness of up to cm without shrinking.

• Download 510355_de_Sicherheitsdatenblatt
• Download 510355_de_Sicherheitsdatenblatt_2

Water Could Make You Happier

Item added to your cart

YachtCare reinforced epoxy 2kg

Couldn't load pickup availability

Description EPOXY FIBER FILLER is a very effective two-component epoxy putty, filled with fiberglass and fast drying. This multi-phase filler is characterized by its high water resistance and good sandability. Thanks to the glass fibers it contains, EPOXY FIBER FILLER can be applied at a thickness of up to 3 cm in one coat without shrinkage. This fiberglass putty hardens to a thin, dry surface. Application domain EPOXY FIBER FILLER is a composite material particularly suitable for filling deep irregularities and bonding polyester or carbon laminates, steel, aluminum and hardwood. Used in all areas requiring high resistance to mechanical stress and water. Tension and elongation forces are better absorbed thanks to the special fibers and transmitted evenly. Polyester laminates and steel and aluminum substrates must be prepared with a two-component epoxy primer such as HEMPEL LIGHT PRIMER. Features Color: light blue Layer thickness: max. 3cm Mixing ratio: 2:1 Pot life: approx. 30 minutes at 20°C Content 2 kilograms.

Further information

Spécifications, subscribe to our newsletter.

Be the first to benefit from our promotional offers

• Choosing a selection results in a full page refresh.
• Opens in a new window.

• DIY & Tools
• Adhesives & Sealers

Return this item for free

Free returns are available for the shipping address you chose. For a full refund with no deduction for return shipping, you can return the item for any reason in new and unused condition.

• Go to your orders and start the return
• Select the return method

Image Unavailable

• To view this video download Flash Player

Causes serious eye damage.

Causes serious eye irritation.

Causes severe skin burns and eye damage.

Causes skin irritation.

Contains epoxy constituents. May produce an allergic reaction.

Harmful to aquatic life with long lasting effects.

May cause an allergic skin reaction.

Toxic to aquatic life with long lasting effects.

Yachtcare Epoxy Fiber Filler Glasfaserspachtel 500g - Faserverstärkte Epoxy Spachtelmasse

( €47.90 / kg )

Purchase options and add-ons

About this item.

• Yacht care epoxy fibre filler: Epoxy fibre spatula – 500 g
• Epoxy spread compound for fibreglass, CFK, steel, aluminium or hardwood
• Suitable to fill deep bumps or adhesion
• Specially Eingemischte fibers

Customer ratings by feature

Frequently bought together.

Customers who viewed this item also viewed

From the manufacturer

High-quality care from Yachtcare

Epoxy fibre filler is particularly suitable as a composite material for the filling of deep bumps and bonding of fibreglass, CFK, steel, aluminium and hardwood. Use in all applications that require mechanical resilience, high strength and excellent water resistance. The special fibres absorb and transmit tension and expansion forces more evenly. GFK, steel and aluminium surfaces must be covered with a 2-component epoxy primer such as HEMPEL LIGHT PRIMER can be primed.

EP filling paste is a 2-component, thixotropic epoxy paste for decorative applications. The high quality epoxy paste is used for filling grooves, e.g. in the floor board or cover area. In addition, the epoxy system is used for decorative woodwork. EP filling paste is solvent-free and is characterised by high water resistance and good grinding properties.

Epoxy base filler is universal for all kinds of filler work in the above and underwater areas. Suitable for boat building materials such as GFK, CFK, steel, aluminium and rigid hardwood. GFK, steel and aluminium surfaces must be covered with a 2-component epoxy primer such as HEMPEL LIGHT PRIMER can be primed.

EP fine spatula is a quick-drying 2-component epoxy spatula with the highest surface quality. The quality is a particularly well sanded, thixotrope fine filler with very low pore volume. It is used for finishing surfaces as well as for preparation, covering and bonding various materials in the above and underwater area. EP fine spatula is solvent-free and is characterised by high water resistance and good grinding properties.

Epoxy fibre filler

Epoxy filling paste, black

Epoxy Base Filler

Epoxy fine spatula.

Product information

Technical details, additional information, warranty & support, looking for specific info, compare with similar items, product safety, product compliance details.

See compliance details for this product ( EU Responsible Person ).

What's in the box?

• 1 x Epoxidharzdicht

Customer reviews

Our goal is to make sure that every review is trustworthy and useful. That's why we use both technology and human investigators to block fake reviews before customers ever see them.  Learn more

We block Amazon accounts that violate our Community guidelines. We also block sellers who buy reviews and take legal actions against parties who provide these reviews.  Learn how to report

Reviews with images

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from Germany

There was a problem filtering reviews right now. please try again later..

Top reviews from other countries

• Press Releases
• Amazon Science
• Sell on Amazon
• Sell on Amazon Business
• Sell on Amazon Handmade
• Associates Programme
• Fulfilment by Amazon
• Protect and build your brand
• Seller Fulfilled Prime
• Advertise Your Products
• Independently Publish with Us
• Host an Amazon Hub
• › See More Make Money with Us
• Shop with points
• Instalments by Barclays
• Amazon Business Amex Card
• Monthly Invoice
• SEPA Direct Debit
• Amazon Currency Converter
• Top Up Your Account
• Top Up Your Account in Store
• COVID-19 and Amazon
• Track Packages or View Orders
• Delivery Rates & Policies
• Amazon Prime
• Returns & Replacements
• Cancel contracts
• Cancel Vodafone contracts
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Amazon Mobile App
• Customer Service
• Accessibility
• Conditions of Use & Sale
• Privacy Notice
• Cookies Notice
• Interest-Based Ads Notice

Most searched terms

Change language, asia pacific, middle east, india & africa.

Please contact your local Sales Representative from Jotun for product availability in your country.

Showing 18 of 31 items

Filter products

Regional availability 2.

• Belgium (23)
• Croatia (29)
• Cyprus (25)
• Denmark (10)
• Finland (4)
• France (31)
• Germany (31)
• Greece (25)
• Iceland (10)
• Ireland (23)
• Netherlands (25)
• Norway (14)
• Poland (25)
• Portugal (31)
• Slovenia (16)
• Sweden (13)
• United Kingdom (31)
• Belarus (0)
• Bulgaria (0)
• Czech Republic (0)
• Lithuania (0)
• Montenegro (0)
• Romania (0)
• Ukraine (0)
• United States (0)
• Algeria (0)
• Bahrain (0)
• Bangladesh (0)
• Ethiopia (0)
• Morocco (0)
• Nigeria (0)
• Pakistan (0)
• Saudi Arabia (0)
• South Africa (0)
• United Arab Emirates (0)
• Hong Kong, China (0)
• Korea, Republic Of (0)
• Taiwan, Province of China (0)
• Australia (0)
• Cambodia (0)
• Indonesia (0)
• Malaysia (0)
• Myanmar (0)
• New Zealand (0)
• Philippines (0)
• Singapore (0)
• Thailand (0)
• Vietnam (0)

Products category

• Ancillaries - yachting (3)
• Fillers - yachting (5)
• Fouling protection - yachting (7)
• Primers - yachting (10)
• Topcoats - yachting (7)
• Maintenance primers (0)
• New construction primers (0)
• Zinc primers (0)
• Concrete and wood protection (0)
• Exterior powder coatings - buildings (0)
• Exterior steel protection coatings - buildings (0)
• Exterior primers and preparation (0)
• Interior decorative topcoats (0)
• Interior powder coatings - buildings (0)
• Interior primers and preparation (0)
• Interior steel protection coatings - buildings (0)
• Cargo hold coatings (0)
• Cargo tank coatings (0)
• Intumescent coatings - cellulosic fire (0)
• Intumescent coatings - hydrocarbon fire (0)
• Car park solutions (0)
• Industrial floor coatings solutions (0)
• Primers sealers and fillers (0)
• Fouling release coating (FRC) (0)
• Self-polishing antifoulings (0)
• Heat resistant coatings (0)
• Insulating coatings (0)
• Mechanically resistant coatings (0)
• Automotive powder coatings (0)
• Exterior powder coatings (0)
• Interior powder coatings (0)
• New construction primer - powder coatings (0)
• Pipeline powder coatings (0)
• Rebar powder coatings (0)
• Shopprimers (0)
• Tank linings (0)
• Architectural topcoats (0)
• Industrial topcoats (0)

Key objectives Select as many objectives as your product should have

• Corrosion protection - atmospheric (5)
• Corrosion protection - atmospheric, immersed or buried (4)
• CUI prevention (0)
• Extended static fouling protection (1)
• Brush and roller application (2)
• Hot surface application (0)
• Surface tolerance (0)
• Excellent colour and gloss retention (3)
• Good colour and gloss retention (3)
• Very good colour and gloss retention (1)
• High gloss (0)
• Low gloss (0)
• Matt finish (0)
• Metallic finish (0)
• Semi gloss (0)
• Textured and design finishes (0)
• Chemical resistance (0)
• Conductivity (0)
• Direct to metal - topcoat (0)
• Fuel saving and carbon intensity (0)
• Heat resistant finishes (0)
• Textured finishes (0)
• Electrical insulation (0)
• Personnel protection (0)
• Process insulation (0)
• Cryogenic spill protection (0)
• Low powder consumption (0)
• Low powder curing temperature (0)
• Glassflake reinforced (0)
• Solar reflection / temperature reduction (0)
• Temporary protection (0)

Certificates and Standards Select as many certificates as your product should have

• IMO antifouling system convention AFS/CONF/26 (1)
• PSPC-WBT (1)
• PSPC-COT (0)
• Cryogenic exposure (0)
• EN 13501-1 Fire classification (0)
• AS 4100 (0)
• BS 476 part 20/21 (0)
• EN 13381-8 (0)
• GB 14907 (0)
• Lloyds register (0)
• Heat resistance and CUI (0)
• Ice going vessels (0)
• ISO 12944-9: CX (0)
• CSA-Z245.20 (0)
• ISO 21809 (0)
• Potable / Drinking water tanks (0)
• ASTM E84 (0)
• Slip resistance for structural joints (0)
• Qualicoat (0)

MegaCote is an anticorrosive, phenalkamine-based epoxy primer for use on yacht substrates and areas.

• Multi-purpose use
• Excellent adhesion
• Excellent abrasion resistance

Advanced hard antifouling with good colour retention and no chalking.

• Developed for speed boats (40+ knots)
• Can be burnished for racing sail boats
• Smooth finish

Mare Nostrum SP

Efficient self-polishing antifouling based on a unique binder combination system, ensuring an active surface.

• Reduced leach layer
• Full season performance
• Can be applied over most other antifouling technologies

Aqualine Spray

Easy to use aerosol spray can designed for protection of drives and other light-metal components below the waterline.

• Copper-oxide free
• Slow polishing binder

Efficient self-polishing antifouling, based on advanced hydrating binders, ensuring an active surface.

Yachting Antiskid

A fine anti-skid mixture of polymer bead particles for effective slip-resistant finish.

• Fine, anti-skid surface
• Can be applied by spray
• Compatible with any MegaGloss topcoat

Ravilakk Varnish

This clear, high gloss boat varnish is easy to apply with good levelling and gloss retention.

• Long lasting wood protection
• Good levelling properties

NonStop II protects underwater yacht hulls from marine fouling.

• Reliable performance
• Service period up to 12 months
• Full colour range

MegaPrimer HS

A high solids, polyamide cured, epoxy coating with a smooth finish and excellent sanding properties.

• No risk of pin holes
• Sandable up to 5 months
• Easy product handling

MegaGloss HG

An ultra premium, high solids topcoat with high-gloss finish and excellent Distinctness of Image.

• Excellent gloss and colour retention
• Outstanding abrasion resistance
• High solids - low VOC

MegaGloss AC

MegaGloss AC is an acrylic polyurethane topcoat with high-gloss finish and excellent gloss retention.

• Applicator friendly
• Can be polished if required

MegaFiller Smooth

MegaFiller Smooth is a finishing filler with high tensile strength and excellent sanding properties.

• Good sanding properties
• High tensile strength

MegaFiller Multi

MegaFiller Multi is a multi-purpose, lightweight, flexible epoxy filler.

• Multi-purpose
• Approved for pump mixing machine use

MegaFiller Deck

MegaFiller Deck is an ultra-lightweight epoxy filler with exceptional adhesion and high flexibility.

• Ultra lightweight
• Excellent sanding properties
• Easy to apply with relatively high thickness

An ultra-lightweight, two-component epoxy fairing filler for high film thickness application.

• Excellent flexibility
• Easy to sand

YachtCare Cleaner

pH neutral and biodegradable, concentrated yacht cleaning detergent for all yacht external surfaces.

• Biodegradable - compliant to MARPOL Annex 5 1.7.5
• Self air-drying and streak free

Yacht Varnish

High gloss, clear alkyd varnish.

• Contains UV filters for long lasting wood protection
• Proven long lasting performance
• Very good levelling and gloss retention

High gloss acrylic polyurethane topcoat with versatile application, for interior spaces.

• Easy application with spray, roller or brush
• Heat resistant up to 120°C
• Easy to clean

Video modal

A video is being shown

Image modal

An image is being displayed

Brochure modal

A brochure is being displayed

Product was saved to My list .

Colour was saved to My list .

Sign up now for our WhatsApp newsletter and receive a FREE SVB set of playing cards!

Get the latest SVB news via WhatsApp!

• Spare parts
• SVB@Youtube
• My SVB Account
• Compare list

Are you missing items that you have already placed in your shopping cart? Log in to see your saved items.

• Paint, Care, Tools
• GRP, Epoxy & Plastic

Epoxy Resin, Polyester Resin and Filler for Boats

Best ratings

„used to fix dents on my Monsun 31 HR, is bit expensive, but realy time saver, easy to use, good for sanding. Just missed color. needed wite, not ivory. ivory is bit dak for our bout.“

„Nice quality material“

„Great product. Very fast drying and prepare to grinding.“

Polyester Resin

Epoxy Resin

Over 140,000 customer reviews

98.7% recommend SVB!

GRP, Epoxy & Plastic guides

Fast, faster, SVB!

Worldwide delivery, in no time at all!

Repair Kits

NEW: Worldwide UPS Express Shipping

Bookable directly in SVB Check-Out!

Fiberglass Mat and Roving

A fix for mishaps on board.

- Repair damage on board -

It's good to know that there are many options available when it comes to repairing and restoring the former splendor of your yacht . You'll find a selection of good and affordable products here, which will help you to fix anything on board. It's often a good idea to have a small supply of filler on board so that you can quickly seal up any holes or cracks. 

Buy polyester resin and epoxy resin at low prices in our online shop and be read about these and how to use them in our Polyester Guide and Epoxy Guide .

Customer ratings & reviews

Jorge da Costa M. on 11.06.2024

Jan D. on 11.06.2024

Goed, net en snel contact bij vragen.

Randel K. on 11.06.2024

[email protected] | +33 (0)1 34 46 45 24

• Standard hardware
• Raw material
• Spare parts
• Non-aviation
• Filler Materials

YACHTCARE-EPOXY-BASE-FILLER-450GM - EPOXY FILLER AND FINE FILLER - SOLVENT FREE

We have registered your request for an estimate for this product. Cart for a quote

Our commitments

Products to discover ...

PR1428B2-K25 - ACCESS DOOR SEALANT

We have registered your request for an estimate for this product. --> View basket.

AEROSHELL-GREASE-22-17KG - GREASE - MIL-PRF-81322G

SCOTCH-WELD-EC-3532-B-A-48.5ML - TWO-COMPONENT STRUCTURAL ADHESIVE

MOLYKOTE-BR-2-PLUS-1KG - HIGH PERFORMANCE GREASE BLACK

RTV-732-WHITE-310ML - SEALANT WHITE

MOBIL-JET-OIL-II-55GL - AIRCRAFT-TYPE GAS TURBINE LUBRICANT

LPS-3-1GL - PREMIER RUST INHIBITOR

PR1428B1-2-1001 - ACCESS DOOR SEALANT SK654

PR1428B2-1001 - ACCESS DOOR SEALANT SK654

HYJET-V-1QT - HYDRAULIC FLUID

PR1428B2-1000 - ACCESS DOOR SEALANT

HYDRAUNYCOIL-FH-2-1QT - SYNTHETIC HYDRAULIC FLUID

AEROSHELL-GREASE-33-50KG - MULTI PURPOSE AIRFRAME GREASE

TURBONYCOIL-600-1QT - SYNTHETIC AVIATION TURBINE OIL

PR1440B2-1001 - FUELTANK SEALANT SK654

MOLYKOTE-BR-2-PLUS-5KG - HIGH PERFORMANCE GREASE BLACK

HYJET-IV-A-PLUS-5GL - PHOSPHATE ESTER AVIATION HYDRAULIC FLUID

PR1828B2-LO-1000 - SEALANT LESS ODOR

LPS-CFC-FREE-465ML - ELECTRO CONTACT CLEANER

RTV-732-CLEAR-90ML - SEALANT CLEAR

High added value services, central purchasing office.

We ensure that the necessary chemicals and fasteners remain available to aeronautic professionals.

• Risk prevention

REACH, Transportation methods, Installation Classified for the Protection of the Environment (ICPE) / Storage, Technical data sheets and SDS, Packaging... We have mastered the regulations that pertain to chemical products.

• Environment

Well aware of the environmental impact of the products we distribute, we ensure strict quality control at every stage, in compliance with all legal requirements.

• Our partners

[email protected] +33 (0)1 34 46 45 24 19, rue Georges Méliès Bâtiment K

95240 Cormeilles-en-Parisis

• Our business
• International
• Legal notice
• General Terms of Sale Aviatec Global Aviation SAS - France
• General Conditions of Sale AVIATEC GLOBAL AVIATION GMBH & CO. KG Germany
• Our History
• Customer references
• Aerospace certification EN9120
• Providing an interface between manufacturers and aeronautic professionals
• Ensuring the availability of products required for the manufacture and maintenance of aircraft
• Managing chemical regulations
• Areas of intervention
• Your central purchasing office
• Quote request

Marine-grade fillers that are protective and waterproof can be utilised across multiple capacities on a superyacht. Fillers can be used to repair various surfaces and materials, including cracks, dents, and holes, on the inside or outside of a yacht.

YACHTNEEDS marketplace has sourced a variety of fillers, including under waterline putty, above waterline filler, polyester paste fillers, reinforced putty, epoxy fillers, latex moulding compounds, epoxy wood fillers, plastic repair putty, and more.

Manufacturer

Filler colour

• Crew radios and accessories
• In and out boards
• Life jackets and buoyancy aids
• Life rings and horseshoe
• PFD and accessories
• Bridge, engineering, deck, interior log books
• Books and Almanacs
• Digital weather stations
• Electronic Charts
• Meteorological instruments
• Nautical Flags and Marine Ensigns
• Bridge Electronics
• Navigation lighting
• Custom yacht and boarding signs
• Data SIM cards
• Voice SIM cards
• Bridge and Interior custom folders
• Chart plotting equipment
• Custom Ink Ship Stamps
• Custom Stationery
• Guest Gift Bags
• Pen refills
• Pens and Pencils
• Ships stamps
• Wind meters and wind indicators
• Chains, connectors and anchoring accessories
• Line floats
• Mooring buoys
• Barbecues and accessories
• Bird deterrent devices
• Boarding Ladders and Gangways
• Cleats and Fairleads
• Deck Shower Fittings
• D-ring, rings and triangles
• Exterior cushions
• Fender holders
• Filling points and filler caps
• Flag poles and Bases
• Folding arms for tip-top tables
• Glass and cup holders
• Guard rail wire covers
• Hammocks and chairs
• Handrails and stanchions
• Inspection and storage hatches
• Pulpit joints and bases
• U-bolts and pad-eyes
• High pressure power washer
• Polishers and pads
• Anchor Balls
• Fender covers
• Fender hooks
• Line throwers
• Mooring compensators and springs
• Rope and line covers
• Ropes, mooring lines and sheets
• Shore power cabling slings
• Splicing kit and tools
• Fiberglass and polyglass repair kits
• Glass fabrics
• Glassing kits
• Resin tints
• Fishing Lures
• Fishing rod holders and accessories
• Caulking guns and cartridges
• Grease nipples
• Grub screws
• Hose clamps
• Knives and blades
• Locking rings and pins
• Multi function tools
• Protection and coverings
• Screws and machine screws
• Stainless steel screws
• Suction cups
• Surface protection
• Threaded inserts
• Wire cabling and eyelets
• Portable fridges
• Awlgrip products
• Brushes and rollers
• Colouring pastes
• Masks and respirators
• Painting tools and equipment
• Paint suits
• Sand papers
• Scotch pads
• Spray paints
• Ear and hearing protection
• Eye and vision protection
• Corrosion protection
• Glass cleaners
• Interior and exterior surface treatments
• Leather and vinyl restoration
• Metal polish
• Vinyl wrapping
• Weather proofing and tenting equipment
• Window treatments
• BA sets and accessories
• Fire accessories
• Fire detection
• Fire extinguishers
• Hooks and Snap-hooks
• Lifting gear, eyebolts and strops
• Rubber matting and protection
• Signage and safety notices
• Clam cleats
• Control blocks
• Rope clutches
• Snatch blocks and Pulleys
• Synchro blocks
• Tracks and cars
• Rust treatments
• Stainless cleaners
• Teak cleaners
• Teak cleaning equipment
• Teak decking
• Teak gratings
• Teak protection
• A-frames and T-tops
• Bags and Dry Bags
• Balance boards
• Bimini spares and accessories
• Boat covers and canvasses
• Dinghy accessories and spares
• Dive and Snorkelling equipment
• Dive scooters
• Inflatable Boats
• Inflatable platforms
• Inflatable slides and islands
• Inflatable tender repair kits and spares
• Jetsurf boards and accessories
• Kayaks and Accessories
• Key rings and floaties
• Kneeboards and accessories
• Outboard engine covers
• Paddle boards (SUPS) and accessories
• Phone Cases
• Pumps and inflation aids
• Scooters and electric bicycles
• Seats and benches
• Skateboards
• Ski boat mirrors
• Surfboards and Bodyboards
• Tow and ski ropes
• Tow points and ski poles
• Toys and towables
• Wakeboards and accessories
• Wake towers and accessories
• Waterproof Speakers and Head Units
• Water skis and accessories
• Wetsuits and rash vests
• Cleaning mitts
• Guns and nozzles
• Hose connection kits and adapters
• Microfibres
• Shurhold accessories
• Soaps and cleaning kits
• Tender and rib cleaners
• Adapters and power supplies
• AV and IT cabling
• Bluetooth speakers
• Cellular routers
• Entertainment systems
• IDEA YACHT compatible hardware
• Routers and switches
• Security and CCTV
• Server cabinets and accesories
• VOIP phones
• Wireless access points
• Ball bearings
• Bearing inserts
• Tapered roller bearings
• Alarms and panels switches
• Bilge float switches
• Bilge pumps
• High capacity and portable pumps
• Battery boxes
• Battery charger and inverters
• Battery chargers
• Battery clamps, terminals and cables
• Battery controllers
• Battery switches and Isolators
• Cable glands and stuffing boxes
• Chargers and charging cables
• Control panels and panel accessories
• DC and DC Converters
• Electrical switches
• Extension cords
• Fuses and fuse holders
• Galvanic isolators
• Heat shrinks
• Infrared cameras
• Junction boxes
• Multimeters and testers
• Shore power converters
• Shore power plugs and cabling
• Terminal boards and shunts
• Terminal connectors
• Transformers
• Watertight plugs, sockets and cabling
• Wiring and cable accessories
• Air filters
• Alternators
• Bearings and bushings
• Control circuitry
• Crankcase breathers
• Engine hardware
• Engine instruments and Gauges
• Exhaust systems
• Fuel filters
• Gaskets and O-rings
• Heat exchangers and plate coolers
• Impeller pumps and bodies
• Naphtha filters
• Oil filters
• Other Volvo Penta Spares
• Outboard engine fuel lines and spares
• Service kits
• Spares kits
• Spark plugs
• Starter motors
• Suction strainers
• Thermostats
• Water pumps
• Adhesives and glues
• Allen and torx keys
• Containers and drip trays
• Crowbars and pry bars
• Cutters and Router bits
• Cutting and grinding discs
• Cutting and grinding tools
• Drill bits and hole saws
• Endoscopes and borescopes
• Engine room hand cleaners and wipes
• Files and brushes
• Gasket material
• Grabbing tools
• Grease pumps
• Hammers and mallets
• Hand trolley and lifts
• Honing paste
• Hoses and piping
• Jerry cans and funnels
• Measuring tools
• Pliers, cutters, clamps and vice grips
• Pneumatic tools
• Punches, chisels and scrapers
• Rivets and rivet guns
• Saddles and hose straps
• Saws and saw blades
• Screwdrivers and driver bits
• Silicone and sealants
• Sockets, spanners and wrenches
• Solvent cleaners and de-greasers
• Specialist tools
• Super glues
• Taps and dies
• Threaded bar
• Thread lock
• Tool boxes, bags, cabinets and drawers
• Tools - gas powered
• Tools - hand-held
• Tools - power
• Vacuum cleaners
• Welding tools
• Wire brushes
• Fresh and raw water pumps
• Fresh water tanks and Storage
• Pump spares
• Under counter water filters
• Water Filters
• Water softeners
• Fuel and oil transfer pumps
• Portable fuel tanks
• Black, Grey and freshwater treatment
• Expansion tanks
• Grey and Black water tanks and sumps
• Macerator pumps
• Antifouling
• Antifouling cleaners
• Antifouling primers
• Antifouling thinners
• Arneson surface drives
• Bow thrusters
• Bow thruster tunnels
• Gearboxes and transmission spares
• Line cutters
• Prop protection
• Rubbing strakes and fender profiles
• Shaft packing and bushings
• Shaft seals
• Throttle control levers
• Windscreen wipers and blades
• Filters and filter cleaners
• Pool accessories
• Pool chemicals
• Thermometers
• Water sanitation equipment
• Gas lifting cylinders
• Glass panelling and eclosures
• Hinges and handles
• Pipes and round bar
• Safes and lock boxes
• Cabinet spotlights
• Light fittings
• Light fixtures
• Engine coolant
• Engine oils
• Fuel additives
• Gear and transmission oils
• Hydraulic oils
• Ball valves
• Pipe and Hose fittings
• PVC and polypropylene fittings
• PVC lubricants
• Sink and drain plugs
• Skin fittings
• Stainless steel fittings
• Toilet spares
• Traps and U-bends
• Water Heaters and boilers
• Black and grey water pumps
• AC Controllers and fan coils
• Air purification and treatments
• Fan coils and radiators
• Filters and filter material
• Ventilation and ventilation fans
• Inboard engine steering systems
• Outboard engine steering systems
• Straight line steering system
• Collapsible storage
• Portable storage
• Level displays
• Level sensors
• Electric outboard engines
• Engine flushing equipment
• GPS Tracking
• Kill cords and safety cut-offs
• Outboard Engines
• Outboard engine stern plates and mounting brackets
• Outboard stabiliser fins
• Propellers and Pullers
• Chain counters
• Controls and switches
• Manual winches
• Thermal switches
• Winch covers
• Winch handles
• Winch maintenance
• Winch spares
• Windlass control boxes
• Windlass inverters
• Condiments, sauces and mustards
• Dried mushrooms
• Grains and flours
• Jams, spreads and honey
• Oils and vinegars
• Pastas, rice and noodles
• Salts, herbs and spices
• Frozen fish
• Cleaning products
• Galley appliances
• Galley Utensils
• Pots, pans and lids
• Luggage and luggage tags
• Sun screen and aftersun lotions
• Water bottles
• Cigar cases
• Hookah and shisha
• Hookah and shisha accessories
• Hookah and shisha cleaning kits
• Hookah and shisha coals
• Hookah and shisha flavours
• Humidifiers
• Humidor accessories
• Hygrometers
• Lighters and lighter cases
• Vases and containers
• Christmas food gifts
• Anti-bacterial sprays and sanitizers
• Bottles and spray bottles
• Candles and candle holders
• Interior cleaning products
• Mini-bar fridge
• Room diffusers and fragrances
• Sanitary and disinfectant equipment
• Tissue boxes and holders
• Trays, Towel and Shoe Baskets
• Carpets and rugs
• Cushions and throw pillows
• Throws and blankets
• Waste Baskets
• Window dressings
• Laundry products
• Mattress covers and toppers
• Towels and bath mats
• First aid kits
• Sea sickness
• CBD Products
• Coffee and capsules
• Dish liquid
• Infusion tea and coffee
• Nuts, seeds and dried fruit
• Soft drinks
• Superfoods and Nutritional supplements
• Bar equipment
• Coffee machines
• Custom Napkins
• Gifts and gift sets
• Ice Buckets
• Interior service systems
• Magnetic glassware and bases
• Service appliances
• Service guides
• Table décor
• Table Linens
• Tea and coffee Infusers
• Travel Mugs
• Belts and accesories
• Caps and hats
• Chef Jackets
• Dresses and skirts
• Jackets and Vests
• Jerseys and Hoodies
• Overalls and Coveralls
• Shirts and Polos
• Shoes and sneakers
• Shorts and skorts
• Trousers and Pants
• Vitamins, minerals and supplements
• Champagne, Prosecco and sparkling wine
• Dessert wines
• Liqueurs and aperitifs
• Port and sherry
• White wines

Part NUM WS403-1

Part NUM WS410-2

Part NUM WS409-2

Part NUM WS410-1

Part NUM RIVAINBOISFONCE500ML

Tikal Marine Systems

Part NUM 204500

Sika France

Part NUM 432745

Part NUM 122293

Part NUM 4011

Part NUM TIK1111

Part NUM 154634

Part NUM 154636

Part NUM LI01BSN-1

Part NUM 153041

Part NUM 146830

Part NUM 154632

Part NUM L543GRIS05

Part NUM WS407-1

Part NUM WS403-2

Part NUM WS406-2

YACHTCARE HOTLINE (MO-FR): 0800 / 9 22 48 22 73

Händler suche

• EPOXY BASE FILLER
• Produktinformationen
• Technisches Merkblatt
• Sicherheitsdatenblatt

Epoxy Base Filler

EPOXY BASE FILLER ist ein lösemittelfreier, 2-komponentiger Füll- & Feinspachtel auf Epoxidbasis. Der Spachtel besitzt eine ausgezeichnete Wasserbeständigkeit und macht ihn besonders geeignet für den Einsatz im Unterwasserbereich, aber selbstverständlich auch für den Überwasserbereich. EPOXY BASE FILLER kann in einer Schichtstärke bis zu 2,0 cm aufgetragen werden, ohne zu schrumpfen.

EPOXY BASE FILLER ist universell für alle Spachtelarbeiten im Über- und Unterwasserbereich einzusetzen. Geeignet für Bootsbaumaterialien wie GFK, CFK, Stahl, Aluminium und starres Hartholz. GFK-, Stahl- und Aluminiumuntergründe müssen mit einem 2-komponentigen Epoxid-Primer, wie z.B. EPOXY PRIMER vorgrundiert werden.

Materialdaten

• Inhalt: 500g , 2kg
• Farbton: hellgrau
• Spez. Gewicht: ca. 1,78g/ml
• Basis: Epoxy

Epoxy Fillers

We provide a wide array of bio-based fillers for epoxy resins and other thermosetting materials. Epoxies have strong adhesive properties and can be used in virtually any material such as glues, paints, coatings, varnishes and composites. 

First and foremost, we offer a bio-based and sustainable option for companies seeking to replace metal and mineral powders. Secondly, we offer a new generation of functional performance powders that can enhance material properties in a variety of ways. 

BioPowder.com are fine powders made exclusively from renewable sources. We only transform side-stream raw materials, above all top-grade olive stones, into additives of any micron size range. 

Our hydrophobic options Olea FP H50 and H100 are lightweight functional epoxy fillers that integrate well with conventional and bio-resins. While rendering any resinous product more environmentally friendly, they add a variety of functional benefits and can offer significant material cost savings thanks to their low density. At BioPowder.com, we work with different hydrophobicity treatments to make sure our epoxy fillers are compatible with a variety of chemistries. 

Epoxy Fillers/Filler Resin for Industrial Coatings

Epoxy resin formulations come in different textures and viscosity levels. They are mostly developed for applications in the construction industry, especially in form of coatings for surfaces such as concrete, plastics, metal, wood and carbon fibre - often with the aim of protecting the underlying material. Epoxy paints are colored resin formulations found in many household appliances, vehicles and electrical installations. 

In construction chemistries, epoxy coatings are often applied in conjunction with polyurethane (PU) systems. This is due to their complementary functionalities: epoxy, being less resistant to UV radiation (sunlight) and presenting a relatively low abrasion resistance, is often applied to a surface as a foundation layer. A PU coating is then applied on top as a finish layer. The mechanical properties of polyurethane coatings generally ensure a longer lifespan and better protective performance. 

BioPowder.com epoxy resin fillers can be the ideal additive for both epoxy and PU coatings. Our line of functional powders, marketed under the brand Olea FP, were developed to add the following benefits: 

• Strength and stability: thanks to excellent particle hardness and high fiber content
• Light weight: BioPowder.com resin fillers only have a fraction of the density of conventional (mineral) fillers
• Bonding capacity and durability: for enhanced adhesion on concrete and other materials
• Possible acceleration of curing and hardening times
• Viscosity control: varying doses of Olea FP resin fillers can lead to increased or reduced viscosity and flowing behaviour of different coating formulations
• Unique texture effects: coarser grades of our epoxy fillers, i.e particles with a larger diameter, make it easy to create granular surface textures, anti-slip coatings and a myriad of decorative possibilities
• Ecological footprint: all our resin fillers are made from upycyled circular raw materials. Manufacturing is resource-saving and waste-reducing, which makes Olea FP an excellent choice for carbon-negative coating formulations

Nowadays, new standards also apply for functional and decorative floorings, for example in industrial plants, healthcare centers and retail outlets: they need to be free of potentially harmful substances (e.g. isocyanates, BPA) but still have a high abrasion resistance and stability. Biodegradable epoxy resin fillers with a high hardness such as Olea FP support your developments in that direction!

To reduce your testing effort, we have created our own flooring line: naturazzO Resilient Floors are a unique resin mix with Olea FP as fillers. The formula can be customized with different natural colorants and BioPowder.com olive stone granules as texturizers and anti-slip additives.

Epoxy Fillers for Wood Repair and Putty Products

Epoxy resins are widely used to restore and repair wooden floors and furniture: cracks are filled with a resin that matches the colour of the object. Achieving such color control has long been a challenge for formulators of bio-based epoxies. Our BioPowder.com Olea FP epoxy filler was designed for use in epoxy-based putties and pastes. As in coatings, our natural particles can act as reinforcing fibres besides adding texture, abrasion resistence and durability.  

Moreover, Olea FP can prevent color modification in liquid and semi-solid formulations. The light beige powder additive remains stable, which facilitates blending with pigments and other (natural) agents.

Epoxy Fillers for Epoxy-Based Composites

Epoxies are popular components of bio-based composites, and so are biodegradable epoxy resin fillers. In epoxy composites, the resin is essentially a binder that holds together reinforcing fibres of different types. BioPowder.com resin powders can offer a double advantage in this context: 

• Our epoxy fillers can boost the renewable content, enhance mechanical properties and reduce costs of the resin, similar to the ways explained in the above section on coatings. 
• Natural epoxy fillers can be the reinforcing fibres: our diverse range of epoxy fillers includes both fine powders and larger, granular particles. This translates into countless texturing possibilities, if desired with a nature-inspired touch.  

Excellent results can be achieved by using Olea FP as hydrophobic epoxy fillers for epoxy resin blends with rubber. Especially in high-load applications, those composites are a number one choice thanks to their adhesive properties.

Epoxy composites are used in a wide number of industrial products such as 

• sealants and adhesives
• highly resistant engineering structures
• carbon-epoxy composites  

When looking at specific material applications, epoxy fillers are mainly used in the following industries:

• Shipbuilding: to protect the underlying material, the market has seen innovative yachtcare epoxy fiber filler solutions. To cater to this demand for high-tech epoxy fillers, we offer fully natural yachtcare high build epoxy filler systems as well as yachtcare epoxy additives with excellent resistance parameters. Our epoxy filler for boats is easy to apply and well suited for a variety of protective coatings. 
• Construction: our epoxy fillers in powder and granular form are suitable for the use in construction materials with exposure to the elements. The most common applications include: epoxy filler for tiles, epoxy filler for metal, epoxy filler for plastic, epoxy filler for concrete, epoxy resin filler for wood, epoxy fiber filler, epoxy thickener, epoxy filler for wood, f18 epoxy filler, etc.
• Fiber technology: especially in solutions where conventional epoxy fillers (e.g. epoxy filler fiberglass) have been used, our innovative functional fillers can add unique reinforcing and texture properties. In certain composite applications, BioPowder.com epoxy fillers are recommended in combination or as an alternative to carbon fiber-based solutions. The wide range of our epoxy filler material options will can also facilitate the creation of systems where bio-based epoxy fillers are to be paired with synthetic ones.

The BioPowder.com epoxy resin filler solution is completely safe and therefore highly suitable for composites used in interiors. They facilitate formulation of materials to be used for frequent human contact such as automotive parts, biopolymers for medical parts and indoor coatings. Our epoxy fillers are extremely versatile and open new possibilities for the creation of textured surfaces. 

Frequently Asked Questions (FAQ): Epoxy Fillers / Filler Resin

1. are there any minimum order quantities for your resin fillers / filler resin.

We supply exclusively to business customers, i.e. industrial manufacturers and specialized laboratories. Hence, our resin fillers are available as palleted batches with standard packaging units of 25kg bags. Although we are willing to supply individual 25kg bags, you will obtain a much better value-for-money when purchasing larger volumes.

2. Which regulatory framework applies to BioPowder.com natural resin fillers / filler resin?

Our assortment is made entirely of safe, biological by-products from the olive and fruit processing industry. Hence, BioPowder.com epoxy powders are exempt from regulatory frameworks for chemicals such as Regulation (EC) 1907/2006 (REACH).

3. To which destinations can you ship your epoxy resin filler products?

Thanks to our global logistics network, we can ship all our epoxy resin fillers to your doorstep - both in Europe and worldwide. In some instances, we sell through specialized resellers and partner companies. Please ask us for guidance.

4. Are you manufacturing bespoke resin fillers?

Yes, besides certain standardised resin powder grades, we offer tailored additive solutions. We are open to processing our natural raw materials into any possible particle size ranges. Our expertise allows us to create resin fillers for a variety of requirements and texture effects. Please contact us for further information.

5. Where do your raw materials come from?

All our natural raw material providers are located in close proximity to our production facility in Southern Spain. Hence, our epoxy filler range is made from local by-products by local people.

6. What is the carbon footprint of your epoxy fillers?

Numerous criteria have been considered throughout our procurement, production and logistics processes of our epoxy fillers. Resource use is kept down to a minimum and power is the main utility consumed in our factory. Due to local sourcing (point 5), we have minimized internal logistics, and we generally opt for the carbon-friendly sea freight option when exporting our resin fillers overseas.

7. What is the availability of your natural resin fillers?

As a leading specialist for natural powder additives, we strive to fulfill our orders in a timely and 100% reliable manner. Our long-standing market experience and stable procurement conditions allow us to produce large volumes on a continuous basis. Therefore, we can fulfill long-term supply contracts and are pleased to receive recurring orders.

Whatever your epoxy fillers / filler resin application might be, please contact us to discuss your project. We are pleased to help you find the optimal epoxy resin filler.

Related Products

Almond Shell

Peach Stone

Pistachio Shell

Avocado Stone

Apricot Stone

Argan Shell

Walnut Shell

Epoxy fine filler YACHTCARE

Prices incl. VAT plus shipping costs

• Do you have any questions concerning this product?
• PDF: Yachtcare-Handbung Reparatur DE
• Artikel im TOPLICHT-Katalog auf Seite 277 ansehen
• View article in TOPLICHT catalog on page 277