precision 17 sailboat

• My Searches  
• Watch List (0)
• Sign In  

Precision 17 Boats For Sale in Australia

Found 3 listings.

• New Precision Boats For Sale
• Used Precision Boats For Sale
• New Precision in current search
• Used Precision in current search

Precision 56 Sports Fisher Custom Commercial Vessel

Introducing this multi-purpose Precision 56 - An incredibly rare vessel fit for a multitude of ...

• 56' 0" / 17.07m
• AU $370,000 Plus GST if applicable

Precision 65 Sports Fisher With Tuna Tower

ASKING PRICE IS $1,295,000 PLUS GST Without a doubt one of the best maintained sport ...

• 65' / 19.81m
• AU $1,295,000 Plus Shipping, GST & other

Precision 18 Flybridge

Presenting a flagship vessel from Precision Marine, "Champagne Kiss". This Precision ...

• 59' 1" / 18.00m
• AU $889,500 Make an offer

• Forums New posts Unanswered threads Register Top Posts Email
• What's new New posts New Posts (legacy) Latest activity New media
• Media New media New comments
• Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
• Classifieds Sell Your Boat Used Gear for Sale
• Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
• Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe

I need some feedback on the Precision 18

• Thread starter RussC
• Start date Jun 11, 2017
• Forums for All Owners
• Trailer Sailors

Russ,my first boat was an 18,but I don't t have enough experience ( or usable memory) to answer your question. If you go to the trailor sailers site linked from this forum ( trailor sailers bulletin board?) You will find a very active and helpful Precision forum there,those guys can help.  

The P-18 is a somewhat tender boat. Keep in mind that the ballast is in a stub keel, with a centerboard that slots up into the keel. We had a friend with a Com-Pac 23, a much heavier boat. When he'd step on the P-18 at the dock, he would always be taken for a ride, because he was used to stepping on the CP23 and it wouldn't move. I think the P-18 is slightly more tender than my O'day 192, and I have a bit more ballast, and the boat is a bit bigger than the P-18. I like to occasionally "wash the toe rails," but if I'm doing that more than once or twice every 5 minutes or so, that's my hint that it's too puffy, and I should tuck in my reef. Overall, the P-18 is a great little boat, but it really is not much more than a ballasted dinghy. Was out in a friend's J/70 in a bit of puffy wind. With it's 600 pound lifting keel, it heels, but then it takes off! That thing is so fast!  

Do you let your wife helm the Victoria 18? I've heard many stories of people who are afraid of heeling, that once you give them the tiller and teach them to head up with too much pressure, they realize they are in control, and often start to push the heeling, knowing they can round up. Might get her less skittish, and trust the boat better....  

Brian S said: The P-18 is a somewhat tender boat. Keep in mind that the ballast is in a stub keel, with a centerboard that slots up into the keel. We had a friend with a Com-Pac 23, a much heavier boat. When he'd step on the P-18 at the dock, he would always be taken for a ride, because he was used to stepping on the CP23 and it wouldn't move. I think the P-18 is slightly more tender than my O'day 192, and I have a bit more ballast, and the boat is a bit bigger than the P-18. I like to occasionally "wash the toe rails," but if I'm doing that more than once or twice every 5 minutes or so, that's my hint that it's too puffy, and I should tuck in my reef. Overall, the P-18 is a great little boat, but it really is not much more than a ballasted dinghy. Was out in a friend's J/70 in a bit of puffy wind. With it's 600 pound lifting keel, it heels, but then it takes off! That thing is so fast! Click to expand

Crazy Dave Condon

RussC Hope your wife is feeling better. Suggest that you learn more with the use of sails not heeling ove 12 to 14 degrees even in a Victoria 18 I once owned. Crazy Dave  

Crazy Dave Condon said: RussC Suggest that you learn more with the use of sails not heeling ove 12 to 14 degrees even in a Victoria 18 I once owned. Crazy Dave Click to expand

Russ, sorry your wife has those kinds of difficulties. I remember how much I used to love bouncing along in our Boston Whaler 13 with 20hp motor, but my Grandmother couldn't stand it! I think the bumps and rolls and pitches of small boats are just what we have to deal with. When we get into bigger boats, the extra mass damp out the sharper movements. One thing I have heard about Precisions in general is that they have a flat-ish bottom, which tends to pound beating to windward in chop. It would be best for you to hitch a ride in one if you can, to see if it's acceptable.  

RussC Like I said I owned a Precision 18 and was merely suggesting less heel. Had to do that with my wife when we owned it. It was a trade in I took for a new Precision 23. I use to be a Precsion dealer stocking the entire line. Next time I will pass by your messages and that is all.  

Hey, Crazy Dave! Do you agree with the assessment that the Precisions tend towards flat bottoms and can pound in chop? Or am I mis-remembering that?  

sailorforever

Dave, research a montgomery 17 one listed here, Montgomery 17, 2006, HEMET, California, sailboat for sale from Sailing Texas, yacht for sale  

Crazy Dave Condon said: RussC Like I said I owned a Precision 18 and was merely suggesting less heel. Had to do that with my wife when we owned it. It was a trade in I took for a new Precision 23. I use to be a Precsion dealer stocking the entire line. Next time I will pass by your messages and that is all. Click to expand

Being a major sailboat dealer I owned quite a few boats and at Smith Mt. Lake, I took a trade of a Vic toria which we sailed and then later in North Carolina as a dealer, I took a Precision 18 in trade and we sailed that too. Currently I own a canoe and two kayaks at age 66. A friend of mine, Mavilio ( now deceased) taught me a lot how to sail and his theory thru sail control and less heel has proved his theory to be true with small boats on heeling and he raced competively in the Med. I am also very much aware of smaller boats being tender. Also, my degree is in history but I do know boats and was very much involved with designs and innovations only if you knew. I had customers who felt uneasy with excessive heel and that included both sexes. As for those with disabilities, I sold boats that were for lack of words fixed so they could comfortably sail a sailboat and many sought me out. As for cancer, we have lost good friends who fought the fight and others who survived. My wife who is a microbiologist has worked at several hospitals, managed the microbiology labs in North America for one of the top leading pharmaceutical companies in the world and most notably Duke Cancer Research. I have also worked with veterans handling their affairs who too underwent chemo. As for your wife, I pray she is comfortable and chemo will work for her. I know this is a difficult time for you and if there is anything I can do, I wish I could help you. There are many things that you folks do not know about my family or me but you would surprised. However, that is personal and that included folks from all walks of life. Those experiences will go to the grave with me. However, one I am proud is my father is credited by the Army for the advocation, use and maintenance of helicopters to the U. S. Army Aviation and as a child, Gen. Marshal bounced me on his knee as a child. God was good to me in my dealership serving many and merely giving back to the community to include you. I merely made a suggestion and if you disagree with that suggestion, so be it but we can agree to disagree in a gentleman like manner. Dave Condon  

Hey, what about a Com-Pac SunCat? I had a friend with one once, never got a chance to sail it with him. It was a nice little daysailer, pretty beamy, so it might have a lot of form stability. Not sure if it's ballasted or not, does have a centerboard. My friend felt that it was somewhat under-canvassed, which again implies a bit more stability. It has a big, open cockpit, and a cabin big enough that he and his wife would sleep on board from time to time. I knew a guy on a forum once who made a poly tarp jib for his, which helped with the under-canvassed aspects. With a boom gallows, gaff rig, and hinged tabernacle, people rave about how easy it is to rig for dry sailing.  

Represented them too. Good boats  

If you are still interested in a Precision 18 you might want to post your question over on the sister forum for Precision. It has an active membership. Link to it below. http://forum.trailersailor.com/forum.php?id=11#1214132  

Thanks Tom, but I've decided against the P-18 due to what I consider insufficient fixed ballast. looks like a great little boat otherwise, and was hard for me to pass by, but...........  

I am resurrecting this conversation for those interested in a future Precision 18 purchase. I have a P18 that I’ve been out with 14x now in winds from 3-24Kts for 2-3 hours a sail and this boat compared to my previous Com-Pac 16 and Potter 19 is my favorite so far! The only major mod I did right off the bat before sailing was add 50# of lead shot (6 Snapple bottles worth under the cabin flooring) now after sailing a bit it might not be necessary but I’ll leave it. I have a New Rolly-Tasker 110% CDI RF Jib and a NEW Rolly-Tasker double reefed main. If you are sailing with old bagged out sails any boat will be harder to control! Even in a whisper of air she’ll scoot along. At @12kts I put first reef in at @18Kts second reef and roll jib up 50% she’ll make windward no problem unlike the previous mentioned also fine boats which have loads of stability at the expense of performance. Yes, when sitting at the dock and initially stepping on she will move a bit but sailing (with my added lead shot ballast weight and properly trimmed sails) at 10-12* heel she firms up solid and is on rails stable. I’ve only been in 2-3’ waves but have not noticed any problems pounding up to close reach. I’ve sailed with 4 adults in Cockpit beam reaching on main alone @15Kts and was impressed with room/stability. IMO a fantastic boat to learn HOW to sail with forgiveness to the beginner. * Do yourself a favor and Seal up Starboard side cockpit locker/cockpit drains. Easily done to fix the P18 Achilles heel  

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

Precision: Small, Fast, and Fun

Small, fast, and fun.

Cruisers | Daysailors | Crossover | Frequently Asked Questions

We have designed our share of large yachts, but our enthusiasm for small boats remains undiminished. Small-boat sailors derive every bit as much satisfaction from their modest craft as jet-setters do from their big ones, and we approach our smaller designs as no less significant, only less big. We take great pride in applying the same standards to all our work.

We are also proud of our long term association with Precision Boatworks, www.precisionboatworks.com which began in 1984 with the Precision 18 and continued until they ceased new boat production 35 years later. Precision shared our commitment to, and pride in, doing small boats well. Their tooling was exquisite, and it produced attractive, stylish, high quality molded parts throughout their model line, from the Precision 15 to the Precision 23. They built to an equally high standard, with materials that are chosen and used carefully, and with quality rigging and hardware that is appropriate for the intended use. Their boats were carefully built to their designed weights, and they are rugged, reliable, and long lasting. Stylish looks, lively performance, and fun sailing are all top priorities for both designer and builder on all Precision sailboats.

The essential ‘Precision DNA’ that is central to the performance, style, modest draft and easy trailering of each Precision model is common to them all, but there are differences that give them their individual appeal.

The Precision cruisers all feature a keel/centerboard underbody that combines modest draft when with the board is up, with excellent windward performance when the board is down. The ballast is secured deep in the fixed keel cavity to maximize stability. The board itself is only heavy enough to drop on its own, so that it can be raised and lowered with one hand, and so that stability is not reduced significantly when it is up.

Precision 18

The Precision 18 was designed to be the smallest boat that could be practically cruised, and still be easily trailered by a relatively small car. She has a remarkably loyal following, and is still in active production after nearly 30 years.

Precision 21

Not too big, not too small, and for some, just right. Designed to fit right between the Precision 18 and Precision 23, the Precision 21 was intended to appeal to sailors requiring neither the minimum cost of a mini-, nor the extra space of a maxi-trailerable. I recently encountered a Marblehead family of four going out for an evening sail, and they could hardly have been happier or more complementary about their boat. They said that their Precision 21 suits them perfectly.

Precision 23

Targeted to be the biggest cruiser that could be practically trailored behind a family car, the Precision 23 is an enduring benchmark for her size and type. She has successfully completed some surprisingly long passages, and has earned an impressive number of rewarding wins in club level racing.

Precision 27-28

The P-27 became the P-28 with the addition of a swim step in an extended transom.  These were only boats in the Precision line that featured an inboard diesel auxiliary and optional wheel steering.  This step up in specification proved to be a challenge for their dealer network at the time, so not a lot were produced, but the boats are comfortable and sailed well, and are quite popular with their owners.

The Precisions daysailors have especially large cockpits, and no cuddy cabins. They are both built in two versions, one as a crew ballasted pure centerboarder for ready trailering, and another that is a bit heavier with a fixed lead keel for added stability.

Precision 15 and Precision 15K

The Precision 15 was intended as an entry level family boat, with pricing and practicality to suit. Precision 15’s are easy to rig, easy to handle, and rewarding to sail. They achieve a nice balance between rewarding performance and reliable seakeeping, which they combine with ample stability. In addition to facilitating family fun, Precision 15’s are in wide use as trainers in community sailing programs.

Precision 185 and Precision 185K

The Precision 185 expands on the broad appeal of her smaller sister by adding an extra dose of acceleration and speed to her performance profile. She was recognized by Sailing World magazine as a Boat of the Year for her “combination of good sailing characteristics, substantial construction, and reasonable cost.” Her swim platform at the transom contributes to the fun by getting swimmers back aboard more easily and allowing youngsters to trail their toes in water. This ‘back porch’ can also contribute to safety by facilitating boarding from a dinghy, and recovering from an accidental ‘man overboard’ incident more easily and quickly. For some sailors, the Precision 185K keel version may be better suited for deeper, less sheltered waters.

Transit 380

The T_380 design ( www.transit380.com ) is intended to suit young sailors who are making the transition from the single-handed Optimist pram to high performance double-handed dinghies. Most kids ‘size out’ of the Opti at about 115 pounds, and between the ages of 11 to 14. After years of sailing alone in prams, many are also looking forward to sailing together with friends. Many do not yet have the sailing skills and experience required to handle a Club 420, however, and expecting them to do so is a bit like handing a new driver the keys to a Porsche. For decades, the Blue Jay and Widgeon (among others) have filled this gap, but time and technology have long since passed these boats by. The Transit_380 brings modern materials and carefully ‘kid centered’ design detailing to a contemporary version of this transitional mid boat.

Precision 165

Precision 165 combines the low trailer weight and reasonable cost of a daysailor with the ‘get out of the weather’ cuddy cabin and on-board toilet facilities of a small cruiser. She is offered with a fixed lead keel only, and performs very nicely with just a 21 inch deep draft. The term ‘crossover’ may be overused these days, but it does describe the appeal of the Precision 165 especially well.

The C-26 ( www.colgate26.com ) was built under contract by Precision Boatworks , and marketed by Steve Colgate. The boat was originally designed as a trainer for Steve’s well known Offshore Sailing School, and is very much a collaboration between Steve and Doris (basic concept and specifications), Jim Taylor (design detailing), and Precision (tooling and construction). The C-26 was so well received that she was soon marketed directly to the public, and she was recognized by Sailing World magazine as a Boat of the Year . SW judge Bill Lee wrote, “Not only did I find the Colgate 26 to be a good trainer but also I found myself applauding her for being an excellent sailboat in her own right. (She) appears (ruggedly built) relative to most modern sport boats and I found … excellent glasswork and construction quality with good attention to detail…She represents tremendous value on today’s market.” The C-26 was chosen by the US Coast Guard, US Navy, and Maine Maritime Academies for both instruction and intercollegiate competition, and she is in active production (now by Waterline Systems) with nearly 400 boats built to date.

FAQ’s ABOUT SIMILAR TAYLOR DESIGNS

Before our association with Precision Boatworks, we designed several other small cruisers that were produced by various builders, none of which currently provide support or parts to current owners. We are often asked about them, and offer the following background:

Spectrum 22

Chronologically the first of these small trailerable designs, she was commissioned by Spectrum Yacht Corp, which had a modestly successful production run. (See Spindrift 22, below)

Starwind 19

Wellcraft commissioned the Starwind 19 in the early ’80’s, and did a nice job building a lot of them (400?) before they realized that they could make much more money per square foot of factory space building powerboats. They built good quality boats to our Starwind 19 and Starwind 27 designs, before they went back to all power. The Starwind 223 was not our design.

Spindrift/Starwind

Rebel Industries bought the molds for the Starwind 19 and Spectrum 22, and built a handful of boats, not always wisely or well. They marketed the Starwind 19 variously as the Starwind 19, Starwind 190, and Spindrift 19, but left the boat essentially unchanged from the orginal Wellcraft version. They retooled the Spectrum 22 without our permission or input, as the Spindrift 22.

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Precision 18

Precision 18 is a 17 ′ 5 ″ / 5.3 m monohull sailboat designed by Jim Taylor and built by Precision Boat Works starting in 1984.

• 2 / 10 Solon, IA, US 2001 Precision 18 $7,000 USD View
• 3 / 10 Solon, IA, US 2001 Precision 18 $7,000 USD View
• 4 / 10 Solon, IA, US 2001 Precision 18 $7,000 USD View
• 5 / 10 Solon, IA, US 2001 Precision 18 $7,000 USD View
• 6 / 10 Solon, IA, US 2001 Precision 18 $7,000 USD View
• 7 / 10 Solon, IA, US 2001 Precision 18 $7,000 USD View
• 8 / 10 Solon, IA, US 2001 Precision 18 $7,000 USD View
• 9 / 10 Solon, IA, US 2001 Precision 18 $7,000 USD View
• 10 / 10 Solon, IA, US 2001 Precision 18 $7,000 USD View

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Home > Find Your Sail > Search by Make and Model > O’Day > O’Day 17

O’Day 17

" * " indicates required fields

Step 1 of 3

Let's Get to Know Each Other

Let's connect, why it's important to partner with a designer on your o’day 17 sail.

The design is the most critical part of your new sail. Ensuring the sail fits and performs its best is a must for our crew. The Precision Sails Design team are experts at their craft. Unlike other sail lofts all of our sailors work one-on-one with a designer to perfect their O’Day 17 sail.

No Two O’Day 17 Sails Are Alike

There are many factors that affect the performance and design of your sails. Location, sailing experience, and weather conditions all come into play when picking the perfect sail. Two mainsails made for two O’Day 17’s in California and Florida will have different designs, sailcloth, and options based on what is best for the sailor.

Taking measurements is easy. All sailors work alongside our measurement team to measure and confirm their rig specs. This helps ensure your design is flawless and allows us to extend our Perfect Fit Guarantee to all of our sailors.

Discover the best cloth for your sailing needs, our sail details, or more about how Precision Sails is leading the sail-making industry with innovative new practices.

Proudly offering the largest selection of sailcloth in the industry, our team is always available to help you find your perfect sail. Whether you're a weekend sailor, coastal cruiser, or club racer our team is ready to walk you through the process.

Types of Sails

Precision Sail Loft specializes in producing headsails, mainsails, spinnakers, gennakers, and code zeros. So no matter the type of sail you’re looking for, we can help. Our sails are trusted by cruisers and racers alike from around the globe. Review the sail options and craftsmanship available to customize your dream sail.

Build & Process

Every sail we craft is produced to the highest standards with the best hardware, craftsmanship, and skill-set in the industry. Pair that with Precision Sails' approach to communication and your sailboat will be ready to set sail before you know it.

Unparalleled Commitment To Helping Sailors

As experts in design, communication, and production our team is ready to take on the task of making sails for your boat. Give us a call to get started.

“ I just received my asymmetrical spinnaker, with sock and turtle bag, along with a new 135 Genoa. The entire process was simple and both sales and the design team were in regular contact if there were any questions. The customer portal was easy to use and lets you keep track of where in the process your sails are. Great sails, great service -Graham Edwards (Facebook)

“ The whole team at Precision Sails was fantastic from start to finish. We’ve had a laminate main and genoa made so far and have a spinnaker on the way. They listened carefully to our needs and recommended a great sail cloth. We couldn’t have gotten more bang for our buck! -Noah Regelous (Google)

“ We received our spinnaker and launched it yesterday and I just wanted to let you know how pleased we are with it. The service we received from your company was exceptional and the quality of your product is second to none. We will certainly be return customers in the next few months to replace our main and jib sails and will recommend your company to all our sailing buddies. Once again-thank you.” -Daniel Jackson (Google)

“ we had good communication during the planning stages and the knowledgeable people at precision sails really got me fixed up good! The sails look and work fabulous! my boat sails better than it ever had! couldn’t be more pleased with the product AND the service!” -Fred Jelich (Facebook)

“ Our new furling jib for a Corsair 27 Had to be specially designed due to the height of the furler, but this was accomplished quickly and in short order we had our sail which fits beautifully and has a great shape. It’s everything we could have wanted, high tech design, thoughtfully executed and affordable.” -Nancy Y. (Yelp)

Request a O’Day 17 Quote

Looking to buy a new headsail or mainsail for your O’Day 17? Request a free quote from Precision Sails for a new custom sail. Our team will work with you to design the perfect sail for you.

Thanks for telling us a bit about yourself and your boat. Our team will send you a preliminary quote based on information we have gathered from sailors similar to you.

We will give you a call in order to narrow down the options on your quote and improve the accuracy. If you want us to call you at a specific time, feel free to schedule a time on our calendar!

Thanks for telling us a bit about yourself and your boat. Our team will reach out to offer some suggestions and get started on finding you the perfect sail!

Specifications LOA - 18' 5'' LWL - 16' 8'' BEAM - 7' 4'' DRAFT, Board up - 6" DRAFT, Board down - 4' 10" DRAFT, Fixed Keel Version - 3' 6" Displacement:   »Centerboard Model - 590 lbs. (approx.)   »Fixed Keel Model - 880 lbs. (approx.) Ballast, Fixed Keel Version 375 lbs. (approx.) Sail area - 181 sq. ft. Mast height above DWL - 27' 3" Designer: - Jim Taylor Awards 2003 Boat of The Year for Best Value to Read About It Hallberg-Rassy and Javelin pick up awards Click to Read About It The first offerings from PRECISION BOATWORKS nearly 20 years ago were open daysailors with a focus on good all around performance, and they have come full circle with their new PRECISION 185. In the interim, all but one of our eight previous PRECISION designs have featured enclosed interiors as part of their appeal. Only the PRECISION 15 (and PRECISION 15K) have been open boats, offering the joy of small boat sailing in its purest, simplest form. The P-15 design focused on stability, safety, lively performance and reliable handling, and she has been a huge success. The new PRECISION 185 expands on the broad appeal of her smaller sister by adding an extra dose of acceleration and speed to her performance profile. The ‘big daysailor’ type is still probably best defined by the Lightning, Rhodes 19 and Flying Scott, all old favorites introduced nearly forty years ago. There has not been a great deal of innovation and development in this market for some time, and various new offerings have come and gone without making much of an impact. The PRECISION 185 will make her mark by using true state-of-the-art design and construction technology to combine vastly improved ergonomics and higher performance with low weight, low maintenance, and low cost. Comfortable seating, computer-shaped hull and fins, and precise tooling will all contribute to the appeal of this ‘new century’ competitor. Like her smaller sister, the PRECISION 185 features a large, self-draining cockpit, a secure spot for a portable ice chest, practical under-deck storage, straightforward rigging, and high quality hardware. Her swim platform at the transom is an unusual feature usually reserved for large offshore cruisers. In addition to contributing to the fun by getting swimmers back aboard more easily and allowing youngsters to trail their toes in water, this ‘back porch’ can contribute to safety by facilitating boarding from a dinghy, and recovering from an accidental ‘man overboard’ incident more easily and quickly. The performance parameters of the PRECISION 185 are not intended to put her in the realm of a ‘crash and burn’ Australian 18 skiff, but they will give her the kind of acceleration and speed that will turn heads and quicken the pulse when desired. She will offer speed, stability and control over a wide range of conditions that will be the envy of both her classic and contemporary competitors. She will sail beautifully under main alone when shorthanded or in heavy weather. Her broad deck beam and high-volume side decks will help keep her crew dry, and maximize her resistance to capsize. She shares the careful balance and dynamic stability that have earned the PRECISION 15, 165, 18, 21, 23 and 28 their well-earned reputations as lively, reliable performers in all conditions. PRECISION BOAT WORKS continues to focus entirely on small boats, and their long experience and expertise in this market is second to none. They have built all of our PRECISION designs with meticulous care, and their commitment to high-quality construction is unwavering. We share their pride in everything they build, and we are confident that the new PRECISION 185 will quickly earn her place as a worthy addition to their well-respected line. Jim Taylor Standard Equipment Hand laminated fiberglass construction Vinylester resin hull skin coat Positive Foam flotation 9 ft. 9 in. Self bailing cockpit 8' 2'' Long Ergonomically correct cockpit seats Stern swim platform/boarding area Large forepeak locker w/watertight door Ballasted fiberglass NACA foil centerboard Sealed centerboard trunk w/mainsheet block 4 Mooring cleats (Fixed keel version has 4 Stainless Steel Lifting eyes/mooring eyes) Kick-up rudder (Fixed keel version has fixed rudder blade) Tiller extension Harken ball bearing blocks Harken Jib track with cars and Harken cam cleats Harken 4 to 1 boom vang Anodized mast and boom Hinged Stainless Steel mast step Stainless steel standing rigging Dacron running rigging Stainless steel bow eye Harken Jib Furling Gear High Performance Mainsail and Furling Jib » » Link to the Precision 185 Reviews Notice: All pricing subject to change without notice, FOB Palmetto, Florida. Prices do not include transportation to the dealer, state & local taxes, dealer preparation (commissioning) bottom paint, ground tackle or safety gear. Please consult with your authorized Precision dealer to select and budget for these additional items. 438 IMAGES Siren 17 Sails for Sale Precision DaySailer, 17 ft., 1986, Lockhart, Texas, sailboat for sale Precision DaySailer, 17 ft., 1986, Lockhart, Texas, sailboat for sale Precision DaySailer, 17 ft., 1986, Lockhart, Texas, sailboat for sale 1989 Precision 17 in AMSA Survey FOR SALE @ Oceaneer Marine Brokers 89 Precision 17 17.5 length sailboat for sale in North Carolina VIDEO Jongert 34m at Sunset Buying a used sailboat, 40 to 50 foot, Boats I would not buy Newport 27, my new boat! 2002 Precision 28 COM PAC 23 SAILBOAT STEERS CLEAR OF TOP 10 SAILING PITFALLS ПЕРВЫЙ обзор WINDBOAT 7.0 Cabin ( Предсерийное исполнение ) COMMENTS PRECISION 18 17.42 ft / 5.31 m: LWL: ... Precision Boat Works: Download Boat Record: Sailboat Forum. View All Topics: ... Like the LWL, it will vary with the weights of fuel, water, stores and equipment. A boat's actual draft is usually somewhat more than the original designed or advertised draft. For boats with adjustable keels (centerboards ... Precision sailboats for sale by owner. Precision preowned sailboats for sale by owner. Precision used sailboats for sale by owner. Home. Register & Post. View All Sailboats. Search. ... Sailboat Added 17-Sep-2023 More Details: PRECISION BOAT WORKS PRECISION 21 - SOLD: Length: 21' Beam: 8' Draft: 1-6' Year: 1990: Type: daysailer: Precision Boat Works P-18 Sailboat The Precision 18 is designed to be a lively, well-mannered sailboat rather than a floating vacation home, but the features described are noteworthy nonetheless. There is ample sitting headroom for 4 and a filler cushion that drops to form a 6'6" v=berth that is NOT broken up by the usual awkward mast support post. 2089 Precision 17 17.5 length Seller's Description. white with #1 and #3 jibs and full main. Cushions inside and out. solid and screen hatch doors. Draft is 1.5 swing keel up and 4' down. Includes trailer. Equipment: Has custom carrier for mast. Tocatsu 5 horse engine. Cushions for sleeping. Includes trailer. Precision Boat Works General Specifications Specifications . LOA --17' 5" LWL -- 15' 5" BEAM -- 7' 5" DRAFT, Board up -- 1' 6" DRAFT, Board down -- 4' 3" Precision boats for sale Precision boats for sale on YachtWorld are offered at a range of prices from $8,900 on the more modest side, with costs up to $1,500,000 for the most expensive, custom yachts. What Precision model is the best? Some of the most iconic Precision models currently listed include: 23, 165, 23 Sloop, Brewer Pilot House and Convertible. Various ... Precision sailboats for sale by owner. Your search returned 5 matches of 99064 sailboats posted to date. Sort by: Length Year Price Added Precision 18 Precision sailboats for sale by owner. Your search returned 6 matches of 102456 sailboats posted to date. Sort by: Length Year Price Added Precision P18 Precision 17 Boats For Sale in Australia Perth Oceaneer Marine Brokers - Mandurah, Western Australia. 59' 1". 18.00m. 2000. AU $889,500 Make an offer. Find a full range of Precision 17 Boats For Sale in Australia. New and Used boats for sale. Precision 18 The Precision 18 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem, a plumb transom, a transom-hung, kick-up rudder controlled by a tiller and a fixed stub keel, with a NACA airfoil 68 lb (31 kg) fiberglass centerboard that retracts into the keel. I need some feedback on the Precision 18 Sep 11, 2015. 1,584. Merit 22- Oregon lakes. Jun 11, 2017. #1. I'm afraid I may have to sell my beloved Victoria 18 soon, as my wife just doesn't feel comfortable in it. the Vic is only 5.5' wide, so it is initially tender. With the 550b keel it firms up solid as a rock beyond 15* or so, but she just doesn't feel secure in it regardless. Precision: Small, Fast, and Fun Precision 15 and Precision 15K. The Precision 15 was intended as an entry level family boat, with pricing and practicality to suit. Precision 15's are easy to rig, easy to handle, and rewarding to sail. They achieve a nice balance between rewarding performance and reliable seakeeping, which they combine with ample stability. DAYSAILER Precision Boat Works: Associations: Daysailer Class (O'Day) Products: The Sail Warehouse : Download Boat Record: ... 1997), states that a boat with a BN of less than 1.3 will be slow in light winds. A boat with a BN of 1.6 or greater is a boat that will be reefed often in offshore cruising. Derek Harvey, "Multihulls for Cruising and Racing ... Precision 18 Precision 18 is a 17′ 5″ / 5.3 m monohull sailboat designed by Jim Taylor and built by Precision Boat Works starting in 1984. Great choice! Your favorites are temporarily saved for this session. Precision Boat Works Precision Boats? Quality is built in by Brothers Richard and Bill Porter, owners & operators of Precision Boat Works for 40 years. During these 4 decades, they have excelled in building quality, value engineered, affordable trailerable sailboats. Precision Boat Works leads the small sailboat industry with well designed sailboats that are simple ... Siren 17 Sails for Sale The Siren 17 is a small, monohull with a length overall of 17 feet and a beam of 6 feet. It has a displacement of 750 pounds and a sail area of approximately 139 square feet. The boat is designed to be sailed by one or two people and has a maximum capacity of four. The Siren 17's low profile and sleek lines give it a modern, sporty look that ... Sail Precision boats for sale Find Sail Precision boats for sale in your area & across the world on YachtWorld. Offering the best selection of Precision boats to choose from. Precision Sailboat Owners Page Builder: Precision Boat Works 1511 18th Ave. Drive East Palmetto, FL 34221 (941) 722-6601 (941) 722-5595 FAX http://www.precisionboatworks.com Precision Boat Works Contact: Precision Boat Works, Inc. 1511 18th Avenue Drive East Palmetto, FL 34221 Tel. (941) 722-6601 Fax (941) 722-5595 New Sails Custom Designed for Your Sailboat We make it easy to get new sails custom designed for your sailboat or sailing yacht, at the best prices online. Replacement sails for Catalina, Hunter, Beneteau, Pearson, C&C, and 15,000 more! Get a free quote within 24 hours or less. Headsails, Mainsails, Spinnakers, and Turtle Bags too! O'Day 17 Sails for Sale Pair that with Precision Sails' approach to communication and your sailboat will be ready to set sail before you know it. Learn More. Unparalleled Commitment To Helping Sailors ... Looking to buy a new headsail or mainsail for your O'Day 17? Request a free quote from Precision Sails for a new custom sail. Our team will work with you to design ... Precision 18 The Precision 18 is designed to be a lively, well-mannered sailboat rather than a floating vacation home, but the features described are noteworthy nonetheless. ... Length - 17'5" Beam - 7'5" Draft (Center Board Up) 1'6" (Center Board Down) 4'3" Weight - 1100 lbs; Mast Height - 27' Precision Boat Works Comfortable seating, computer-shaped hull and fins, and precise tooling will all contribute to the appeal of this 'new century' competitor. Like her smaller sister, the PRECISION 185 features a large, self-draining cockpit, a secure spot for a portable ice chest, practical under-deck storage, straightforward rigging, and high quality hardware. gulet motorboat powerboat riverboat sailboat trimaran yacht