etap 24 sailboat

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sails and Rigging
• Maintenance
• Sailing Totem
• Sailor & Galley
• Living Aboard
• Destinations
• Gear & Electronics
• Charter Resources
• Ultimate Boat Giveaway

4-Pack of Vintage Pocket Cruisers

• By Jeremy McGeary
• Updated: May 5, 2005

While many cruising sailors today jump with both feet and a hefty money clip into a big boat, chockablock with gadgetry, the traditional sailing evolution begins with small craft and ends with the ultimate cruiser. That first boat might be a dinghy or a one-design racer, and trading up from boat to boat usually accompanies changes in family situations and growing wealth. But no matter how big that überboat may be, cruisers with sailing in their blood usually find small craft compelling.

Small is usually simple. Getting off the mooring, the dock, or the dolly takes just minutes, allowing a spontaneous response to the siren call to savor a delicious, breezy fall sunset after work or a cool, still, summer dawn before joining rush hour.

But how big is small? That, of course, is relative. To establish “small” in terms of a cruising boat, as distinct from a daysailer, we chose as our guideline the European Union Recreational Craft Directive’s “Design Category C–Inshore (significant wave height up to and including 2 meters and wind forces up to and including 6 Beaufort).” A handful of new boats fell into that category, mostly candidates for Cruising World’s Boat of the Year 2005 contest that didn’t get nominated because they weren’t considered suitable for ocean passages.

The U. S. Sailboat Show in Annapolis, Maryland, offered the best opportunity to take a look at some of them conveniently close to one of the largest contiguous bodies of Category C water in North America: Chesapeake Bay.

A Compact Cat

Even though, at 32 feet, the TomCat 9.7 was the biggest vessel in the group, builder Ted Strain makes no bold claims about its capabilities. “I expect to see this boat on lakes, inland waters like Chesapeake Bay, and on inshore cruises,” he says. “It’d be an ideal boat for the Abacos.” Although the hulls are only three feet wide at sole height, artful use of the interior and the bridgedeck creates the generous accommodations typical in catamarans. Head (to port), galley (to starboard), and sleeping quarters (in both sterns) occupy the hulls, which are stepped aft to accommodate 48-inch-wide double berths. A large athwartships playpen berth and an adjoining “dining booth” make full use of the “house.” Aft of the dinette is a vestibule with full standing headroom that’s open to the cockpit but can be closed with a set of detachable panels. The builder, Strain Associates Ltd./TomCat Boats, offers a choice of woods for the interior finish and also entertains modifications to the interior layout to accommodate customers’ preferences.

To simplify construction, to avoid having daggerboard housings take up space in the narrow hulls, and to make sailing easier, Strain designed the TomCat with a centerboard deployed from the bridgedeck. Neatly tucked under the saloon table, its housing ties into the massive structural focal point of mast step and main beam. When raised to the draft of the hulls, the board still has some bite in the water, which helps when sailing to weather in shallow water.

Although Strain deliberately kept the sail plan small to assuage safety concerns about catamarans that he says still persist in the general sailing community, it’s adequate to push the boat along in as little as 7 knots of wind. The TomCat also tacked handily in this light air, as long as the skipper was paying attention and had the boat moving before turning the wheel. Auxiliary power is provided by outboards mounted on each transom, and rather than develop a unique helm system for the twin rudders, Strain adapted outboard-motor steering controls that have been in use for many years and are available off the shelf in marine stores everywhere.

A roller-furling jib and lazy jacks on the main simplify sailhandling, and the stainless-steel arch keeps the traveler aloft and out of the way. Backseat drivers can observe and critique the helmsman’s work from a bench seat beneath this arch.

I found the side decks too narrow for even small feet and would happily trade a little interior headroom for an inch or two more footing. You can go forward across the cabin top; however, that enterprise would be easier and safer with a grabrail on the house.

Strain, who runs TomCat Boats with his son Tom, came late to boatbuilding–he’s a physicist and electrical engineer by profession–but he’s familiar with the pros and cons of catamarans because, he says, the Iroquois he’s owned for 34 years has its share of both. Strain is full of praise for the Iroquois’ designer, Rod McAlpine-Downey. “He was years ahead of his time,” he says.

For the Road and Ramps

Slipping in at the low end of the size spectrum comes the Eclipse from Com-Pac Yachts/The Hutchins Company, long a favorite builder of neat, compact cruisers. The Eclipse, 21 feet LOA, is a rare new model in its lineup. In a break from tradition for a firm that does much of its development work in-house, Hutchins sought input from naval architect Bruce Bingham. The move seems to have paid off. Bingham helped with the boat’s styling, contributing the plumb stem and a stretched-out waterline, making the most of the boat’s short length for both speed potential and interior volume.

While some folks will happily gunkhole in even smaller craft, the Eclipse, at just over 18 feet on deck, is about as large a boat as you’d want to trailer behind a midsize car but as small a one as will still accommodate civilized living. Making such tight quarters livable requires deliberate and careful design of every corner and component. Lift a cushion here, you reveal the galley sink; lift another, and there’s the stove; flip the countertop between them and set the stove into the braces on its underside, which is now on top.

Most of the Eclipse’s interior consists of cushioned horizontal surfaces, so the feeling is reminiscent of being in a playpen. While there’s ample room for sprawling or sitting comfortably, thanks to the centerboard trunk being under the sole, headroom is elusive. If you want to stretch your legs, stand in the hatch. But it’s really cozy in the cabin, and I can envisage being tucked up a shallow creek and burrowing into a good book while gentle rain patters on the deck and an aromatic stew simmers on the stove.

When the clouds blow away, the Eclipse is ready for action, which it takes seriously. The rudder kicks down, and the centerboard drops out of the shallow molded keel to a weatherly draft of 5 feet 2 inches. The boat has a very flat bottom and soft chines that carry the waterline beam well outboard for added stability. The mainsheet is raised above the cockpit on a stainless-steel arch, which also serves as an attachment point for a bimini, as boom gallows, and as mast support for trailering. The mainsheet leads forward along the boom, then back to the cockpit to a cleat on the cabin top. An optional outboard motor can be mounted on a transom bracket, while the gas tank stows neatly away in the starboard cockpit locker.

Taking its cue from the big charter boats, the Eclipse’s open transom provides easy access from cockpit to creek and easy egress up a fold-down stainless-steel ladder.

The transition from sailer to trailer is simple and can be accomplished singlehandedly, if necessary. Key to that is the trademarked Mastendr system, which includes a pinned mast hinge just above the furled mainsail, quick-release levers for de-tensioning standing rigging, and a stainless-steel gin pole that provides the lever for lowering the spar. Once it’s resting on the stern arch, the mast can be unpinned from its hinge and slid forward to balance the overhangs on the trailer.

Even as access to the water becomes more scarce for larger boats, ramps still provide a way in for boats on wheels, and those boats are usually of light enough draft that they can sail in the less deep and less crowded waters. Looking at this Eclipse, the light of this approach is almost blinding.

Fair and Fast

While the Eclipse is unabashedly small, the Etap 24i has pretensions to sailing in a bigger pond with bigger fishes. With the standard 4-foot-11-inch keel, the boat is European Union certified for Category B.

Like all the Etaps, it’s unsinkable, which means the unthinkable won’t happen even if the big pond turns nasty or things go terribly wrong. However, the 24i approaches the business of sailing with considerable pluck and instills confidence that it can handle boisterous conditions. It’s the kind of vessel in which British or French sailors would cheerfully cross the English Channel on a weekend.

For those who sail in Category C waters on this side of the Atlantic, the Etap 24i has another great advantage: Its optional tandem keel draws less than 3 feet while it still helps the boat sail well to windward, making the vessel doubly attractive to sailors in shallow-water venues. On our afternoon outing on Chesapeake Bay, in a gentle fall breeze, we sailed five miles closehauled from the Eastern Shore root of the Bay Bridge to the Severn River, posed there for the photographer, and reached back all in well under three hours. The Etap 24i evidently has the legs for serious coastal cruising.

The crew’s body weight is important trimming ballast on a small cruiser like the Etap 24i. Using the tiller extension and sitting on the artfully angled cockpit coaming not only gives you better visibility and more comfort but it also puts you farther out on the rail to give the boat more power. The twin rudders have plenty of bite and permit the outboard to be mounted on centerline. An inboard 10-horsepower Yanmar with a saildrive is a good option if you’re concerned about weight distribution or your aging back’s capacity for handling a hefty four-stroke on the stern.

Belowdecks, too, the 24i reveals big-boat aspirations–a plumbed-in toilet and holding tank suggest it’ll go beyond a portapotti’s operating radius. It also has a stainless-steel sink and surround for the two-burner Origo alcohol stove. The forward cabin can be closed off, though that might make it a little claustrophobic and a little too intimate with the head. The saloon has a lot of cushioned areas, and removable backrests convert the settees into real berths.

Abovedecks, the emphasis Etap places on thoughtful design is evident in the simple sweeping transition from coachroof to cockpit coaming and in the aluminum toerail extrusion. Another clever detail is the removable mainsheet traveler that opens the cockpit for more après-voile leisure space.

With its beam a smidgen under 8 feet 3 inches, the Etap 24i is legally trailerable, which expands your cruising options from Category C to category lake, or river.

The Hunter in the Pack

Even if you can’t have–or don’t want–a big boat, you can have big-boat stuff. At least that’s the message Hunter Marine is sending with the new Hunter 27, especially when it’s tricked out with the Deluxe Package.

Right down to the shore-power supply, the half-electric/half-butane two-burner stove, the microwave, and the 12-volt cooler that you load at home and stow in a specially built drawer in the galley, this boat is equally well equipped for life at the dock and for sorties to nearby cruising grounds.

The Hunter design team came up with a boat that fits the niche of a 27-foot sailboat for novices who want stability, ease of operation, and value. With leisure time being a rare commodity for most folks, a Category C venue is about as far as most will get on the spur of a moment before it’s time to head back. The Hunter provides a means to enjoy such moments in comfort.

For anyone whose experience in 27-footers is determined by boats like the Bristol 27 of the 1960s–me, for one–the Hunter 27 offers a new yardstick. Thanks to its plumb stem, long waterline, broad beam, and high freeboard, there’s elbow room everywhere the older boats lack it: in the V-berth (in this layout, essentially an extension of the saloon), the saloon (with comfortable seating for at least six around a central table), the head (complete with shower), and the galley. In addition, the Hunter provides an aft cabin complete with a hanging locker, a seat, and a huge athwartships berth under the cockpit–all wrapped into a package with crisp and attractive lines.

An inboard engine, a 9-horsepower Yanmar, is standard, and access to it is generous, particularly from the front: The companionway steps hinge up, their weight taken by gas struts, to reveal most of the maintenance points and a water heater for the shower.

The Hunter 27 is also quite nicely equipped for sailing. The mainsheet is double-ended–one end with a 3:1 purchase for quick trimming, and the other with a 6:1 ratio for fine-tuning–and the cockpit is laid out for easy singlehanding. The standard rig is a fractional B&R arrangement with optional in-mast furling.

Another big-boat feature is the wheel steering. At 27 feet, the boat is at the margin between the practicality of a tiller and the comfort of a wheel, but Hunter insists the market has embraced wheel steering, so a wheel it is. The optional Lewmar folding wheel further improves access to the walk-through transom, but it’s pushed so far aft to open up the cockpit that the stern lifeline interferes with the helm seat. As on all Hunters, back-seat drivers can second-guess the skipper from perches in the corner pushpits, but they’d better not be too critical, as guest spots on this boat will be easy to fill.

Given the trend among builders in recent years to bring out ever bigger boats, it’s encouraging to know that the market for pocket cruisers remains vibrant enough to produce such a variety of practical, fun, and versatile craft.

Jeremy McGeary is Cruising World’s senior editor.

Com-Pac Eclipse

LOA 18′ 5″ (5.61 m.) LWL 18′ 1″ (5.51 m.) Beam 7′ 4″ (2.23 m.) Draft 1′ 6″ /5′ 2″ (.46/1.57 m.) Sail Area(100%) 200 sq. ft. (18.6 sq. m.) Ballast 700 lb. (318 kg.) Displacement 2,200 lb. (1,000 kg.) Water 5 gal. (19 l.) Fuel 6.5 gal. in portable tank (25 l.) Engine Outboard (optional) Designer Com-Pac Yachts Price $23,000

Com-Pac Yachts (727) 443-4408 www.com-pacyachts.com

LOA 23′ 11″ (7.30 m.) LWL 22′ 0″ (6.71 m.) Beam 8′ 2″ (2.50 m.) Draft (Standard/tandem keel) 4′ 11″/2′ 9″ (1.5/.85 m.) Sail Area(100%) 277 sq. ft. (25.6 sq. m.) Ballast (Standard/tandem keel) 1,100/1,144 lb. (500/520 kg.) Displacement (Standard/tandem keel) 3,960/4,004 lb. (1,800/1,820 kg.) Water 13.15 gal. (50 l.) Fuel Optional; 8 gal. (30 l.) Engine 10-hp. Yanmar inboard diesel (optional) or outboard Designer Marc-Oliver von Ahlen, Etap Yachting N.V. Price $60,000

Etap USA (866) 382-7872 www.etap-usa.com

LOA 27′ 4″ (8.33 m.) LWL 23′ 7″ (7.19 m.) Beam 9′ 11″ (3.02 m) Draft (Shoal/deep) 3′ 5″/5′ 0″ (1.04/1.52 m.) Sail Area(100%) 298 sq. ft. (27.6 sq. m.) Ballast (Shoal/deep) 2,052/1,901 lb. (930/861 kg.) Displacement (Shoal/deep) 7,656/7,505 lb. (3,480/3,411 kg.) Water 20 gal. (76 l.) Fuel 15 gal. (57 l.) Engine Yanmar 9 hp. (base); 18 hp. (deluxe) Designer Glenn Henderson and Hunter Marine Design Team Price $51,000 (base), $57,000 (deluxe)

Hunter Marine Corporation (386) 462-3077 www.huntermarine.com

LOA 32′ 0″ (9.75 m.) LWL 31′ 6″ (9.60 m.) Beam 16′ 0″ (4.88 m.) Draft (Board up/down) 1′ 6″/5′ 0″ (.46/1.52 m.) Sail Area(100%) 417 sq. ft. (38.8 sq. m.) Ballast NA Displacement 4,800 lb. (2,182 kg.) Water 35 gal. (133 l.) Fuel 24 gal. (91 l.) Engine Two Yamaha 9.9-hp. four-stroke outboards Designer Ted Strain Price $130,000

TomCat Boats (905) 584-1236 www.tomcatboats.com

• More: 2001 - 2010 , 21 - 30 ft , Boat Gallery , Coastal Cruising , com-pac , day sailing , keelboat , monohull , multihull , Sailboat Reviews , Sailboats , under 20 ft
• More Sailboats

For Sale: Little Harbor 63 Ketch

Sailboat Review: Fountaine Pajot Aura 51

A Superyacht Approach at Southerly Yachts

Sailboat Review: Seawind 1170

Off Watch: School Daze

Paradise Pummeled

A Guide to Cruising Paperwork

• Digital Edition
• Customer Service
• Privacy Policy
• Terms of Use
• Email Newsletters
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

Review of Etap 24i

Basic specs..

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

The boat is equipped with one cabin, 4 berths, 50.0 liter fresh water capacity and toilet facility.

The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

The Etap 24i has been built with different keel alternatives.

Unknown keel type

The boat can enter even shallow marinas as the draft is just about 0.85 - 0.95 meter (2.79 - 3.09 ft) dependent on the load. See immersion rate below.

The Etap 24i is equipped with a swing keel. A swing keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.

Etap 24i can enter even shallow marinas as the draft is just about 0.85 - 0.95 meter (2.79 - 3.09 ft) dependent on the load. See immersion rate below.

The boat is typically equipped with an engine.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

What is Capsize Screening Formula (CSF)?

The capsize screening value for Etap 24i is 2.16, indicating that this boat would not be accepted to participate in ocean races.

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.3 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Etap 24i is about 112 kg/cm, alternatively 629 lbs/inch. Meaning: if you load 112 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 629 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

What is Motion Comfort Ratio (MCR)?

What is L/B (Length Beam Ratio)?

What is Displacement Length Ratio?

Maintenance

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 17m 2 (182 ft 2 ). Based on this, your favourite maritime shop can tell you the quantity you need.

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

We are always looking for new photos. If you can contribute with photos for Etap 24i it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.

Performance

Accomodation.

Report error

Tell us what's wrong

We do our best to fix any errors in boatpedia. thanks for the help.

The Etap 24i is a 26.31ft fractional sloop designed by M.O. von Ahlen and built in fiberglass by Etap Yachting since 1999.

The Etap 24i is a light sailboat which is a high performer. It is reasonably stable / stiff and has a low righting capability if capsized. It is best suited as a racing boat.

Etap 24i for sale elsewhere on the web:

Main features

Login or register to personnalize this screen.

You will be able to pin external links of your choice.

See how Sailboatlab works in video

We help you build your own hydraulic steering system - Lecomble & Schmitt

Accommodations

Builder data

Modal Title

The content of your modal.

Personalize your sailboat data sheet

Paste a link here:

Give it a title:

And eventually a link to an image for the thumbnail:

Sold : Very nice Etap 24i built in 2000 and well-maintained by her 1st Owner. The Etap Yachting design has smart and innovative features. The double hull with foam core makes the Etap 24i unsinkable. Fitted with a shoal depth tandemkeel means you can sail this pocket cruiser almost anywhere on inland waters. The tandemkeel provides sufficient lift, thus ensuring the excellent sailing characteristics and also makes it possible to transport the Etap over the road on a trailer. The double rudders flanking the outboard engine, are canted outside providing optimal steering control.

All sheets and halyards are led aft to the cockpit to 10 stoppers and 2x Lewmar 16 ST winches. The mainsheet traveler can be removed from the cockpit easily and exchanged for the table from the cabin after you’re done sailing. Under the cockpit is a large storage area that is both accessible through the cockpit floor as well as from the cabin. This Etap 24i is equipped with a mast lowering installation and the mast is currently in the storage facility of the marina. The interior is kept light by using of beech veneer paneling and has a stylish design. The forecabin has a comfortable V-bed, plus there are 2 single settee berths in the main cabin. These settee berths can be widened by using the back cushions. There’s a handy flip-up countertop that bridges the gap between stove and sink. The forecabin door also closes off the Heads, where a Porta Potti can be placed.

Specification

Do you need more information about this boat ? Then please contact Sealion Yachts . Or you are welcome to call send an email to make an appointment for visiting the boat. Disclaimer

• Boats for Sale

Boats similar to Etap Yachting ETAP 24 I

2001 etap 21i for sale.

OFFERED BY:

Maiden Marine Ltd

1981 Vancouver 27 for sale

Beaufort, North Carolina

Beaufort Yacht Sales

2002 Hunter 270 for sale

Cedar Key, Florida

2002 Etap 21i for sale

Dun Laoghaire

Network Yacht Brokers

2001 Etap 24i for sale

1989 etap etap 22i for sale.

David Morris Ltd

2002 Etap 24i for sale

Burnham-on-Crouch

Clarke & Carter Yacht Brokers

Boat not available.

Etap Yachting ETAP 24 I for sale in Palavas Les Flots, France

Palavas Les Flots, France

Make & Model

Etap Yachting ETAP 24 I

MEASUREMENTS

Description.

Engine Count

Engine Horse Power

ADDITIONAL INFORMATION

NAVIGATION EQUIPMENT

Depth Instrument

Speed Instrument

ABOUT ETAP YACHTING ETAP 24 I

The Etap Yachting ETAP 24 I is 24 feet long and has a 8.2 feet beam. This 2003 diesel Etap Yachting ETAP 24 I with 10 horsepower. The Etap Yachting ETAP 24 Ias well as being equipped with autopilot, depth instrument, gps, speed instrument, vhf.

SIMILAR LOCATIONS

• Etap in France
• Boats in France

• ETAP Manuals
• Owner's manual

ETAP 24 i Owner's Manual

• page of 96 Go / 96

Table of Contents

• Important Notice
• General Data
• Hull Identification Number (HIN)
• Design Category B, C
• Maximum Load Recommended
• Technical Specifications
• Weights-Displacement
• Tank Contents
• Standard Sailplan Diagram
• Sail Dimensions
• Standard Sailplan
• Furling Genoa Sailplan
• Propulsion - Diagrams
• Standing Rigging Standard Diagram
• Standing Rigging with Furling Genoa Diagram
• Construction Standing Rigging
• Construction Running Rigging
• General Arrangement Diagram
• General Arrangement
• General Arrangement - Interior Diagram
• General Arrangement - Interior
• Engine Installation Diagram
• Engine Installation
• Outboard Motor (Optional)
• Inboard Diesel Engine Diagram
• Inboard Diesel Engine (Option)
• Manoeuvring with Motor Diagram
• Manoeuvring with Motor
• Steering System Diagram
• Steering Systems
• Freshwater System Diagram
• Water Supply and Sanitary Systems
• Freshwater System
• Toilet Diagram
• Waste Water Unit Diagram
• Function of the Waste Water Unit
• Bilge System Diagram
• Bilge System
• Electrical System Diagram
• Electrical System
• Electrical System: Recommendations
• Shore Connection 230 V AC
• Electrical Diagram
• Switch Panels Diagram
• Switch Panel 12 V
• Switch Panel Shore Power 230 V (Option)
• Navigation Lighting Diagram
• Navigation Lighting
• 12 V Battery Diagram
• 12 V Battery
• Navigation Instruments Diagram
• Position of the Electrical Cable Conduits Diagram
• Cooking Unit Diagram
• Ventilation Diagram
• Ground Tackle Diagram
• Location of the Owner's Manual Diagram
• Dangers, Warnings and Safety Measures
• Escape Options Diagram
• Fire Extinguishing Facilities Diagram
• Fire Extinguishing Facilities (Option)
• Safety and Lifesaving Equipment Diagram
• Owner's or Captain's Responsibility
• Safety and Lifesaving Equipment List
• Launching Diagram
• Launching with Crane
• To Haul out
• Mast Assembly Diagram
• Striking the Mast
• Mast Assembly
• Basictrim for 7/8 Rigged Mast
• Boom + Kicking Strap Diagram
• Mainsail Sheet Diagram
• Preparing to Sail Diagram
• Preparing to Sail
• Hoisting the Sails
• Operating the Sails Diagram
• Operating the Sails
• Reefing Mainsail Diagram
• Reefing (Reducing Sail) Mainsail (1St Reef, Blue Line on Starboard Side)
• Reefing (Reducing Sail) Mainsail (2Nd Reef, Red Line on Port Side)
• Reefing (Reducing Sail) Genoa Furling (Optional)
• Sailing with Asymmetrical Spinnaker Diagram
• Sailing with Asymmetrical Spinnaker (Optional)
• Cleaning Sails
• Maintenance of the Sails
• Maintenance Diagram
• Maintenance and Repairs
• Maintenance During the Yachting Season
• Winter Storage and Work in Spring Time
• Preparing for Winter Storage
• Electrical System During Winter Storage
• Folded Life-Raft
• Life Jackets
• Work in Winter and Spring Time]
• Spring Inspection List of the Shipyard
• Nature and the Environment
• Oil and Lubricating Grease
• Paint and Cleaning Agents

Advertisement

Quick Links

• 1 Dimensions
• Download this manual

Related Manuals for ETAP 24 i

Related products for etap 24 i, rename the bookmark, delete bookmark, delete from my manuals, upload manual.

Search boats for sale

Etap 24 I (sailboat) for sale

Boat data Etap 24 I

Technical data, buy etap 24 i - equipment sloop - sailboat for sale, etap 24 i - info without obligation - sloop.

Other boats (like Etap 24 I) - for buy and for sale

These sailboats could also be of interest to you

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Etap 23 is a 24 ′ 2 ″ / 7.4 m monohull sailboat designed by Jacques De Ridder and built by Etap Yachting between 1982 and 1989.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.