hunter 30ft sailboat

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Hunter 30 is a 30 ′ 4 ″ / 9.3 m monohull sailboat designed by John Cherubini and built by Hunter Marine between 1973 and 1983.

• 2 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 3 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 4 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 5 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 6 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 7 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 8 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 9 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 10 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 11 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 12 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 13 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 14 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 15 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 16 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View
• 17 / 17 Stonington, CT, US 1983 Hunter 30 $13,500 USD View

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Shoal draft: 4.3’. A keel/cb version was also available.

Tall Rig: I: 42.00’/12.80m J: 12.83’/3.91m P: 37.00’/11.28m E: 10.70’ / 3.26m Total (100% main +fore.): 467.38 ft2/43.42 m2 an unfinished (kit) version was called the QUEST 30.

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The Hunter 30 is a 30.4ft masthead sloop designed by John Cherubini and built in fiberglass by Hunter Marine (USA) between 1973 and 1983.

1000 units have been built..

The Hunter 30 is a moderate weight sailboat which is slightly under powered. It is very stable / stiff and has a good righting capability if capsized. It is best suited as a coastal cruiser. The fuel capacity is originally very small. There is a very short water supply range.

Hunter 30 for sale elsewhere on the web:

Main features

Login or register to personnalize this screen.

You will be able to pin external links of your choice.

See how Sailboatlab works in video

We help you build your own hydraulic steering system - Lecomble & Schmitt

Accommodations

Builder data, other photos.

Modal Title

The content of your modal.

Personalize your sailboat data sheet

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Customer Service

• Free Newsletter

What You Can Learn on a Quick Test Sail

Cabo Rico’s Classic Cutter

Bob Perrys Salty Tayana 37-Footer Boat Review

Tartan 30: An Affordable Classic

Preparing Yourself for Solo Sailing

Your New Feature-Packed VHF Radio

Preparing A Boat to Sail Solo

Solar Panels: Go Rigid If You have the Space…

Shoe Goo II Excels for Quick Sail Repairs

When Should We Retire Dyneema Stays and Running Rigging?

Rethinking MOB Prevention

Top-notch Wind Indicators

Worship Your Universal M-Series Diesel With the Marinized Kubota Block

Taking Care of Your 12-Volt Lead-Acid Battery Bank

Hassle-free Pumpouts

What Your Boat and the Baltimore Super Container Ship May Have…

Battle of the Teak Cleaners — Snappy Teak-Nu vs. Star Brite

New Seacocks for the Offshore Sailor

Bottom Paint Care

Quick and Safe Sail Cleaning

Are E-bikes Worth the Extra Weight and Cost?

How to Handle the Head

The Day Sailor’s First-Aid Kit

How to Select Crew for a Passage or Delivery

Re-sealing the Seams on Waterproof Fabrics

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Inside Practical Sailor

Revisiting the Cherubini Hunter 30

CeCe Stoldt

If you grew up sailing in Florida in the 1970s and 80s as I did, you probably spent many hours day dreaming and looking at Hunters, or, if you were fortunate, sailing one. Those memories might not exist at all were it not for bit of luck and perseverance. While the U.S. economy was caught in a global recession, the Hunter plant in Florida was still churning out sailboat hulls by the dozens.

You didnt have to spend a lot of time on these boats to realize that they werent the paragon of craftsmanship. The laminated floor and furniture seemed dated even back then, and the rough glasswork betrayed the boats mission: to persuade the average Joe that even he could still afford a great escape. By the mid-1980s, it seemed as if every third sailboat entering the Biscayne Bays waterborne bacchanalia, the Columbus Day Regatta, was a Hunter. (Escape, as any good boatbuilder knows, can take many forms.)

While Hunters marketing genius is enviable, the true achievement in its early boats like the John Cherubini-designed Hunter 30, which we review in the June issue of Practical Sailor is that theyve managed to endure at all. The Hunter 30 was launched on the wake of the 1973 oil embargo, and the design survived through nine years of stagflation and rising unemployment.

Fortunately, for Hunter and other builders who prevailed in this era, significant improvements in fiberglass construction methods coincided with the need for lower production costs. Laminate schedules were getting thinner, and the higher fiber-to-resin ratio was more economical. Selling sailboats could still be lucrative, but profitability in the mid-price ranges often required a few corners to be cut.

Almost any sailing forum on the Internet has its resident boat snob who compares fixing up and old production boat from the 70s to putting lipstick on a pig. Certainly, the Hunter 30 has some inherent flaws, but none are irredeemable. Just as a vase cracked during firing can hold more charm than the perfect one, an old Hunter 30 can grow on you. The photos submitted by proud owners that accompany the June 2016 boat review are the clearest proof of this.

We stumbled on this inspiring treasure trove by chance. The handwritten surveys in our dusty decades-old file on the Hunter 30 were growing stale, so for this update on the Hunter 30 we turned to current owners for their impressions. A surprising number of owners responded with detailed answers to our questions, and though each had a few quibbles, the overall assessment of the Hunter 30 was overwhelmingly positive.

Of course, I found the tales of customized improvements to be intriguing, but what really moved me were the personal stories behind what might be considered a run-of-the-mill entry-level cruiser. One Hunter 30 had been passed down through two generations, another had sailed to the Caribbean and back, and another had served as an affordable home while its owner pursued a graduate degree.

Browsing the photos of the Hunter 30s featured in the June issue, I was reminded that a boats pedigree is a terrible gauge of a boats true worth. No, a Cherubini-designed Hunter-despite the exotic-sounding name-is not a Morris, a Hinckley, or a Swan. But in the hands of an owner who appreciates his good fortune, a modest Hunter 30 is worth more than the finest megayacht.

See the June 2016 issue for the complete review of the Hunter 30. For an indepth look at more than a dozen classic, entry-level cruising boats that won’t break the bank, you can purchase our two-volume e-book “Entry Level Racer Cruisers” at our online bookstore .

RELATED ARTICLES MORE FROM AUTHOR

Leave a reply cancel reply.

Log in to leave a comment

Latest Videos

Beneteau 423: What You Should Know | Boat Review

Buying A Sailboat Is Scary! Yacht Broker Interview

The Great Loop – The Basics

Bottom Paint Showdown – Six Paints, One Winner! (John Stone photo)

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

Home > Find Your Sail > Search by Make and Model > Hunter > Hunter 30

" * " indicates required fields

Step 1 of 3

Let's Get to Know Each Other

Let's connect, your trusted partner for hunter 30’s:.

Building Lasting Relationships Through Quality and Precision

Our team of Precision Sails experts conducted extensive research on the web to gather information about the specific sailboat in question. We thoroughly scoured various online sources to compile relevant and accurate information for the boat owner. Our team carefully curated the information to ensure that it would be helpful and informative for the user. We understand the importance of having a deep understanding of your boat’s features, and our goal is to provide comprehensive and reliable information that will enable boat owners to make informed decisions about their sailing experience. By sharing our expertise and knowledge, we hope to empower our customers to get the most out of their sailing adventures.

All About Your Hunter 30

Rig specifications.

These are the specifications provided by the designers, but even from the factory, these boats may not be identical. The reason for this is that the sail industry often contracts manufacturing to different sources in order to achieve economies of scale. What this means is – your Hunter 30 may be more unique than you initially thought.

It’s important to note that boats are also frequently customized, so if you suspect that work has been done on yours, it’s best to take your own measurements. When ordering a sail, we will advise you if using the manufacturer’s specifications is appropriate, or if we require you to complete our own measurement forms.

I: 36.83 ft / 11.23 m

J: 9.75 ft / 2.97 m

P: 40.60 ft / 12.37 m

E: 12.50 ft / 3.81 m

Design and Construction

The Hunter 30 features a modern design with a sleek and stylish profile. Its hull is made of hand-laminated fiberglass, which is both durable and lightweight. The deck is constructed of balsa-cored fiberglass, which provides excellent strength and stiffness while reducing overall weight. The Hunter 30’s mast is made of aluminum, which is both lightweight and corrosion-resistant. The sail plan is a standard masthead rig with a furling jib and a fully battened mainsail. The Hunter 30 comes standard with a deep draft keel, but the boat also has an optional shoal draft keel , which makes it ideal for cruising in shallow waters.

The Hunter 30’s interior is spacious and well-designed, offering comfortable accommodations for its crew. The main cabin features a dinette that can convert into a double berth, as well as a settee and a navigation station. The galley is located to starboard and includes a sink, stove, and icebox. The boat also has a private aft cabin with a double berth and a large V-berth in the forward cabin. The head is located to port and includes a marine toilet and a sink.

History of the Hunter 30

The Hunter 30 was first introduced in 1973 by Hunter Marine. The boat was designed by renowned naval architect John Cherubini and was an immediate success. The Hunter 30 was in production until 1983, and during that time, over 700 boats were built.

The Hunter 30 sailboat is a popular choice among sailing enthusiasts looking for an affordable and reliable vessel. With a length of 30 feet and a beam of 11 feet, the Hunter 30 offers a spacious interior and comfortable accommodations for its crew. In this review, we’ll take a closer look at the Hunter 30 and explore its timeless appeal.

Performance

The Hunter 30 features a sloop rig, which is a popular sail plan for modern sailboats. The Hunter 30’s sail plan is optimized for performance and ease of handling. The mainsail has a large roach, which allows for maximum sail area without sacrificing stability. The boom is positioned high above the cockpit, allowing for more headroom and better visibility.

Additional speed can come from high quality jibs or genoas designed for optimal performance. The boat’s design allows for easy sail handling, with a roller furling system that makes it easy to deploy and stow the jib. The genoa is typically larger than the jib, allowing for more sail area and better performance in light winds.

Overall, the Hunter 30 sailboat is an excellent choice for sailing enthusiasts looking for an affordable and reliable vessel. Its modern design, spacious interior, and excellent performance make it a popular choice among sailors of all skill levels. Whether you’re cruising, day sailing, or racing, the Hunter 30 is a versatile and reliable sailboat that is sure to provide you with many years of enjoyment on the water.

Recommended Sails For Your Hunter 30

We would love to help you enhance your sailing experience on your Hunter 30. That’s why we have put together a list of expertly curated sail recommendations just for you. You can find more information about each sail and their specific uses by following the links to our education page.

You need a mainsail designed to give you the greatest mileage out of your vessel. Precision Sails’ custom designed mainsails come with all the standard options needed to get sailing right away, and custom options to optimize handling, performance, and shape.

Jibs, genoas, yankee cut, staysails, or working jibs, we do it all. No matter what headsail you need for you sailboat, Precision Sails’ team of sail designers will work with you to ensure your new head sail fits and performs for you. Our headsails come complete with all standard options required for the best performance and durability. Learn more about our available headsail options and customization here.

Downwind and Light Wind Sails

Sail downwind easily with your choice of our downwind and light wind sail options. We custom design and tailor every sail for your needs. Explore our symmetrical or asymmetrical spinnakers and code zeros, including what options are available for each.

Request a Hunter 30 Quote

Looking to buy a new headsail or mainsail for your Hunter 30? Request a free quote from Precision Sails for a new custom sail. Our team will work with you to design the perfect sail for you.

Thanks for telling us a bit about yourself and your boat. Our team will send you a preliminary quote based on information we have gathered from sailors similar to you.

We will give you a call in order to narrow down the options on your quote and improve the accuracy. If you want us to call you at a specific time, feel free to schedule a time on our calendar!

Thanks for telling us a bit about yourself and your boat. Our team will reach out to offer some suggestions and get started on finding you the perfect sail!

• Vessel Reviews
• Passenger Vessel World
• Offshore World
• Tug and Salvage World
• Maritime Security World
• Specialised Fields
• Marine Projects World
• Small Craft World
• Tanker World
• Dry Cargo World
• Boxship World
• Aquaculture World
• Trawling World
• Longlining World
• Seining World
• Potting World
• Other Fishing Methods
• Regulation & Enforcement
• Feature Weeks
• Classifieds
• Book Reviews

VESSEL REVIEW | Sinichka – Electric commuter boats designed for Russia’s Moskva River

A series of three new electric monohull commuter ferries have already begun operational sailings on the Moskva River in the Russian capital Moscow.

Built by Russian shipyard Emperium, sister vessels Sinichka , Filka , and Presnya – all named after rivers in Moscow – are being operated by the Moscow Department of Transport and Road Infrastructure Development (Moscow Deptrans). They are the first units of a planned fleet of 20 vessels that will serve the capital city and other nearby communities. The new ferry system will be the water transport system to be operated on the Moskva River in 16 years.

Each vessel has a welded aluminium hull, an LOA of 21 metres, a beam of 6.2 metres, a draught of only 1.4 metres, a displacement of 40 tonnes, and capacity for 80 passengers plus two crewmembers. Seating is available for 42 passengers on each ferry, and the main cabins are also fitted with USB charging ports, wifi connectivity, tables, toilets, and space for bicycles and scooters. The cabin layout can be rearranged to allow the operator to adjust the distances between the seats and to install armrests of varying widths.

An open upper deck is also accessible to passengers and is the only area on each ferry where smoking is allowed.

The ferries are all of modular construction with each ferry’s wheelhouse, main cabin, and other structural elements being built as complete, separate components. This enables the ferries to be easily dismantled for transport to anywhere in Russia by rail and then quickly re-assembled within seven days.

The ferries are also ice-capable. Recently completed operational trials on the Moskva showed that the vessels can also easily navigate under mild winter conditions with broken surface ice, though year-round operations are planned for the entire fleet.

The ferries are each fitted with 500kWh lithium iron phosphate battery packs that supply power to two 134kW motors. This configuration can deliver a maximum speed of 11.8 knots, a cruising speed of just under 10 knots, and a range of 150 kilometres.

Emperium said the transfer of rotation of electric motors to the propeller is carried out by direct drive. As a propulsion installation, a pulling rotary propeller-steering column with double screws is used. The installation of double pulling screws, with similar power, allows an operator to increase the efficiency of the propulsion system to deliver a slightly higher speed or to reduce energy consumption. This arrangement also provides the ferries with enhanced manoeuvrability necessary for navigating in close quarters.

The batteries themselves have projected service lives of 10 to 12 years and are fitted with safety features such as built-in fire extinguishers and gas vents. Quick-disconnect features allow the batteries to be easily removed for replacement or maintenance.

Some of our readers have expressed disquiet at our publication of reviews and articles describing new vessels from Russia. We at Baird Maritime can understand and sympathise with those views. However, despite the behaviour of the country’s leaders, we believe that the maritime world needs to learn of the latest developments in vessel design and construction there.

Click here to read other news stories, features, opinion articles, and vessel reviews as part of this month’s Passenger Vessel Week.

Related Posts

Baird Maritime

Tags: Emperium Filka Moscow Moscow Department of Transport and Road Infrastructure Development Moskva River Presnya Russia Sinichka WBW newbuild

• Previous VESSEL REVIEW | Ferry Rokko – Second 194m Ro-Pax for Miyazaki Car Ferry
• Next Brighton man to be charged for illegal abalone haul

Baird Maritime , launched in 1978, is one of the world's premier maritime publishing houses.

The company produces the leading maritime new portal BairdMaritime.com , home of the world famous Work Boat World, Fishing Boat World, Ship World, Ausmarine, and Commercial Mariner sub-sites, and the industry-leading ship brokerage platforms WorkBoatWorld.com and ShipWorld.com .

Contact us: [email protected]

© Copyright - Baird Maritime

• Terms & Conditions
• Advertise with Baird Maritime
• Submit News/Leads

Shooter Files by f.d. walker

Street Photography Tips, Interaction, Travel, Guides

Apr 24 2017

City Street Guides by f.d. walker: A Street Photography Guide to Moscow, Russia

*A series of guides on shooting Street Photography in cities around the world. Find the best spots to shoot, things to capture, street walks, street tips, safety concerns, and more for cities around the world. I have personally researched, explored and shot Street Photography in every city that I create a guide for. So you can be ready to capture the streets as soon as you step outside with your camera!

At over 12 million people, Moscow is the largest city in Russia and second largest in Europe by population ( Istanbul is #1). An urban, cosmopolitan metropolis with more than enough glitz and glam to cater to the elite, but without losing its fair share of Soviet era roughness around the edges. It can be fast paced, brash, busy, and trendy like other big cities, but it has its blend of West meets Russia atmosphere and beauty that provides plenty of unique interest. The Red Square is as famous as it gets, but there’s so much more to this city, including the most beautiful subway system you’ve ever seen. It would take years to capture all of Moscow, but that means you have an endless amount of areas to discover.

So here’s a Street Photography guide so you can be ready to capture all that Moscow has to offer before you even arrive!

• Patriarch’s Pond
• Old Arbat Street
• Maroseyka Street
• Tverskoy Boulevard

Top 5 Street Spots:

1. red square.

The Red Square is the most famous square in not just Russia, but all of Eastern Europe. The name actually doesn’t come from the color of the bricks or communism, but from the name in Russian, Krásnaya, once meaning “beautiful” before its meaning changed to “red.” This large plaza is what you see on the cover of guide books and magazines for Moscow, with St. Basil’s Cathedral being the center piece next to Lenin’s Mausoleum surrounded by the Kremlin Wall. Of course, the Red Square attracts hordes of tourist due to the main attractions, but all that activity around an interesting atmosphere does provide street photo opportunities. It’s also the central square connecting to the city’s major streets, providing a good starting point to explore outward.

You’ll also find the popular pedestrian only Nikolskaya Street connecting the Red Square to Lubyanka Square. This line of expensive shops includes plenty of activity, while also leading you to another popular square. Filled with history rivaling any city, the Red Square and surrounding areas are the heart and soul of Russia.

2. Patriarch’s Ponds

Patriarch’s Ponds is one of the most exclusive neighborhoods in Moscow. Despite the name being plural, there’s only one large pond, but it’s worth a visit with your camera. It’s a popular spot for locals and expats to come relax or take a stroll around the pond. You get an interesting mix of young and old too, from young love to “babushkas” feeding pigeons. It’s a very peaceful park atmosphere in one of the nicer areas within the city center, while bringing enough activity for street photography. 

The pond is shallow and in the winter becomes a popular spot for ice-skating too. The area is also well-known for the location in the famous Russian novel, The Master and Margarita. 

3. Old Arbat (Stary Arbat)

Old Arbat is the most famous pedestrian street in Moscow, and dating back to the 15th century, also one of its oldest. Originally, it was an area of trade, but soon became the most prestigious residential area in Moscow. During the 18th century, Arbat started attracting the city’s scholars and artists, including Alexander Pushkin. Cafes lined the streets and impressive homes filled the neighborhood. Since then, New Arbat street was created as a highway in the area, while Old Arbat was paved for a 1km pedestrian only walkway.

Due to the historic buildings, famous artists that lived here, and the bohemian atmosphere, Old Arbat has become a big attraction for tourists today. Now, there’s a mix of cafes, restaurants, souvenir shops, street performers, street merchants and other attractions for visitors, and some locals, to come enjoy. It can get really busy here and there’s usually something interesting going on so it’s a good street to come walk with your camera for guaranteed life.

4. Gorky Park

One of the most famous places in Moscow is Gorky Park. The official name is Maxim Gorky’s Central Park of Culture & Leisure, which gives you an idea of what goes on here. When built, it was the first of its kind in the Soviet Union. Divided into two parts, it stretches along Moscow River. One end contains fair rides, foods stands, tennis courts, a sports club, a lake for boat rides, and more. This end brings more active life due to its number of attractions, while the other end is more relaxed, where you’ll find gardens, trees, older buildings, and an outdoor amphitheater.

Gorky Park attracts mostly locals so it’s a good spot to capture the non-tourist side of Moscow life. Muscovites come here to escape the city and unwind in a picturesque setting. The park remains alive outside of the warmer months too, especially when the lake turns into the city’s largest outdoor skating rink. I’d recommend taking the metro out here to spend at least half a day exploring the massive park’s life with your camera.

5. Maroseyka Street

Maroseyka Street is a popular area not too far from the Red Square. The long, winding street turns into Pokrovka and is lined with restaurants, cafes, bars and places to stay. It’s actually where I like to stay when I’m in Moscow due to its location and solid street photography opportunities itself. You have Kitay-gorod station near and if you keep walking southwest, you’ll get to the Red Square. But if you walk northwest, as it changes to Pokrovka, you can find a long street of activity for photography with its own interesting atmosphere.

6. Tverskoy Boulevard

Tverskoy Boulevard is the oldest and longest boulevard in Moscow, beginning at the end of Nikitsky Boulevard, and finishing at Pushkin Square, a spot to come for activity itself. The boulevard is made up of two avenues, with pedestrian walkways in-between. You’ll find grass, shrubbery, trees, benches and more walking it’s almost kilometer length. Many people come here to enjoy some relaxation, walk their dog, or just to use it to walk wherever they’re going. Its center location also provides a nice place to walk with your camera near plenty of other spots you’ll want to check out anyway.

Sample Street Walk:

For a full day of Street Photography, covering some of the best spots, you can follow this sample street walk for Moscow:

• Start your morning walking around the Red Square (1), while exploring the surrounding area, including Nikolskaya Street
• Then walk northwest to Patriarch’s Ponds (2) and slowly walk the pond and surrounding area with your camera
• Next, walk east to the Pushkin Monument and stroll down Tverskoy Boulevard (6)
• Once Tverskoy Boulevard (6) ends, it will turn into Nikitsky Boulevard. Follow this down until you get to the start of Old Arbat Street (3), across from Arbatskaya station
• After you’re done walking down Old Arbat Street (3) for more street photography, spend some time checking out Moscow’s beautiful metro stations
• To finish off the day with more street photography, get off the metro near Red Square (1) again, Maroseyka Street (5) or wherever you’re staying for the night.

3 Things I’ll Remember about Shooting in Moscow:

1. museum metro.

The Moscow metro system was the first underground railway system in the Soviet Union and today includes 203 stations across 340km of routes. The elaborate system has some of the deepest stations in the world too, with escalators that seem to go on forever. None of this is what makes it so special, though. Many of its stations feel like stepping inside a museum, making it without a doubt the most interesting and beautiful metro system I’ve been in.

When built, Stalin wanted to make the metro stations “palaces for the people” with marble, chandeliers, and grand architecture. The best part is the variety of architecture and styles used, making many of the stations a completely different experience visually. You could easily spend a whole day traveling the stations and there are even tours available for people who wish to do just that. My advice, though, would be just to buy a ticket and hop on and off at different stations, while exploring different lines. The museum-like surrounding mixed with the crowds of characters can make for a great photography experience.

Since there are so many stations, here are some of my favorites to check out:

• Novoslobodskaya
• Mayakovskaya
• Elektrozavodskaya
• Komsomolskaya
• Ploschad Revolyutsii
• Dostoyevskaya
• Prospekt Mira

2. Moscow is Big

It’s no secret that Moscow is a big city, but it can feel even bigger with how spread out much of it is. This is especially true if you compare it to cities outside of Asia. If I compared it to cities in Europe, I’d probably say only Istanbul would warrant more time to really discover the depths of this city. Most only explore around the Red Square and surrounding area, but that is such a small part of the city. Although, that central area does give you plenty to see on its own.

Fortunately, I had a good friend living in the city to show me around, but it opened up my eyes even more to how much there is to discover in Moscow. It’s a big city with a variety of atmosphere that can take you from “east” to “west” and trendy to rugged depending on where you go. I’d imagine you’d have to live here a while to really know the city.

3. Cosmopolitan Mix of East meets West

Modern skyscrapers mixed with amazing architecture, a world-class metro system with museum-like beauty, trendy fashion and chic clubs, Moscow is a rich mix of Russian culture and history in a more western cosmopolitan package. There is a push to keep the Russian culture, while also pushing forward with a modern metropolis the whole world will envy. This comes with an impressive skyline, that continues to grow, and endless modernities, but with soviet nostalgia and atmosphere mixed in for good measure.

Mixed in with this grand western cosmopolitan atmosphere, is a strong national pride in Russia. This includes their famous leader, Vladimir Putin. Maybe no other place will you see a country’s leader more often. All over, from the pricey tourist shops to the underground walkway stalls, you’ll find goods with Putin’s likeness covering them. From t-shirts to magnets to Matryoshka dolls. There’s a strong national pride that can be seen around the city, which also extends to their leader. Moscow is many things. It’s East meets West, modernizations meets Soviet era, and a whole lot more.

What To Do For a Street Photography Break?:

Eat at a stolovaya.

Stolovayas are Russian cafeterias that became popular in the Soviet days. You grab a tray and walk down the line of freshly prepared local dishes, and select whatever you want from the chefs. They’re usually inexpensive and a much better value than restaurants, while giving you the opportunity to try from a wide selection of everyday Russian food. They’re also very tasty. I always include some borsch on my tray and go from there. The places themselves are all over Moscow and usually come with Soviet-era aesthetics to complete the experience.

Street Safety Score: 7

*As always, no place is completely safe! So when I talk about safety, I’m speaking in general comparison to other places. Always take precaution, be smart, observe your surroundings and trust your instincts anywhere you go!

Being the 2nd largest city in Europe with over 12 million people, you’re going to have your dangerous areas, but for the most part, it feels safe walking around. Russia is statistically higher in crime compared to most of Europe, but this generally doesn’t apply to tourists and visitors. Around the Red Square and surrounding city center, you should feel completely safe walking around. Pick pocketing can happen, but no more than other touristic places. I always explore Moscow freely without coming across too much to worry about. It’s a spread out city, though, so of course it matters where you are. Just use basic street smarts, know where you are and Moscow shouldn’t give you a problem. 

People’s Reaction Score: 7

Moscow is fast paced, big city life, which usually means people aren’t too concerned with you, or your camera. I don’t find people notice or pay much attention to me when I’m out taking photos in Moscow. For the most part, people just go about their day. You shouldn’t get too many looks or concern. But it can depend on the area you are in. The more you stick out, the more you might get noticed with suspicions. I’ve never had any problems in Moscow, or Russia, but just be careful who you’re taking a photo of if you get out of the city center. Other than that, it’s about average for reactions. 

Street Tips:

Learn the alphabet .

Much of Moscow, including the metro system, doesn’t use english. The Russian alphabet uses letters from the Cyrillic script, which if you aren’t familiar with it and don’t know the sounds, can be hard to decipher the words. This is most important for street names and metro stops when trying to get around. It can save confusion and make it easier getting around if you learn the basic alphabet. At the very least then, you can sound out the words to see which are similar in the english conversion, which can help matching them to maps. When out shooting street photography, getting around is as important as anything. So save yourself some time and frustration by learning the Russian Alphabet.

Use the metro

While Saint-Petersburg feels very walkable for a city its size, Moscow can feel very spread out, even for its bigger size. Outside of the Red Square area, you can have plenty of walking before getting anywhere very interesting, so you’ll need to take the metro a lot if you really want to explore the city. Maps are deceiving here too, it will always be further than it looks.

Another reason it’s less walkable than Saint-Petersburg is its completely different set-up. Moscow’s streets are mostly contstructed in rings with narrow, winding streets in-between. This is common with medieval city cities that used to be confined by walls, but you usually don’t have it in a city this massive. Saint-Petersburg has a more grid-like pattern that also uses the canals to help you know your way around. When it comes to navigating on foot in Moscow, it can be more difficult, so bring a map and take the metro when needed. It’s why Moscow’s metro carries more passengers per day than the London and Paris subways combined.

Explore other areas if you have time

Moscow is really big. While most people stay around the Red Square within the Boulevard Ring, there’s so much more to the city. I covered some other spots outside of this circle, but if you really want to see the city, you’ll need time. If you do have time, some other areas I’d check out first are Zamoskvarechye, along some of the south and western Moscow.

Inspiration:

For some more inspiration, you can look through the Street Photography of Moscow photographer Artem Zhitenev  and check out 33 of my photos taken in Moscow .

Conclusion:

Moscow’s name brings a certain mystique, but once you’re there it might bring a different atmosphere than you expect. It’s big and sprawling, but beautiful in many ways. It can feel like a European capital on a grand scale, but you can definitely find its Russian side in there.

The urban sprawl of Moscow can be intimidating, but give it enough time and you’ll be rewarded with plenty to discover. All with the world’s best metro system to take you around.

I hope this guide can help you start to experience some of what Moscow contains. So grab your camera and capture all that Moscow has to offer for Street Photography!

If you still have any questions about shooting in Moscow, feel free to comment below or email me!

(I want to make these guides as valuable as possible for all of you so add any ideas on improvements, including addition requests, in the comment section!)

Click Here For More City Street Guides!

(A New Guide Posted Every Other Wednesday)

Comment Here! Cancel reply

For patreon exclusive educational content:.

Limited Edition Postcard Prints!

Street Photography Workshops

Donations Always Appreciated

I'll always keep Shooter Files free for everyone, but any donations would be greatly appreciated and help me keep it going. Many thanks to everyone following along!

Cheers! -f.d. walker

Search the Files

For Exclusive Patron Content: