22' sailboat

• Catalina 12.5 Expo
• Catalina 14.2
• Catalina 14.2 Expo
• Catalina 16.5
• Catalina 22 Sport

Catalina 22 Capri

• Catalina 275 Sport
• Catalina 315
• Catalina 355
• Catalina 385
• Catalina 425
• Catalina 445
• MAINSHEET MAGAZINE
• TRUE NORTH YACHTS

Known for its sweet sailing performance in nearly all conditions, the Catalina Capri 22 has been winning sailors since its introduction.

The Capri 22 is more comfortable, safer at sea and easier to maintain than any boat in its class. The striking deck profile is flared across the stern and has wider cockpit curves for crew comfort during and after sailing.

Under the full reclining length seats is a new storage locker and separate battery locker. A complete racing package is available, including: symmetrical spinnaker, sheets, pole and backstay tension adjuster. The enclosable head and available galley module make the Capri 22 suitable for extended daysailing or weekending.

PHOTO GALLERY

GENERAL DIMENSIONS

Length Overall: 24′ 8″

Length of Hull: 22′ 0″

Length at Waterline: 20’ 0″

Beam: 8′ 2″

Distance from Waterline to Masthead: Std 32′ 5″, Tall 34′ 5″

Draft: 2′ 8″

Ballast: 700 lbs

Basic Weight: 2,250 lbs

Displacement / Length: 125

Sail Area / Displacement: 21.3

Ballast Ratio: 31%

Draft: 4′ 0″

Ballast: 650 lbs

Designed Weight: 2,200 lbs

Displacement / Length: 123

Sail Area / Displacement: 21.6

Ballast Ratio: 30%

RIG MEASUREMENTS (STD)

Total with 100% Foretriangle: 229ft  2

RIG MEASUREMENTS (TALL)

Total with 100% Foretriangle: 255ft  2

ENGINE & CONTROLS

Recommended: 4-10 HP Outboard

Primary Lewmar #15, Self Tailing

Optional Cabin Top: #7

Battery Qty – 1 Group 27 150 Amp-Hrs

TANKS & CAPACITIES

Fuel: Portable 6 gal

Holding / Black Water: Portable Head

All specifications are approximate and subject to change without notice.

Actual equipment also subject to change without notice.

STANDARD EQUIPMENT

Construction.

• Hull of Hand-laid Fiberglass with Hull Liner bonded to the Hull
• One Piece Fiberglass Deck with Molded-In Non-Skid Surfaces and Fiberglass Deck Liner
• Lead Fin Keel with Stainless Steel Attaching Bolts
• Five Year Gel Coat Blister Protection * ( 2 )
• Five Year Hull Structure Warranty * ( 3 )

SPARS & RIGGING

• Dacron Mainsail with Battens, Reef Point and Class Insignia
• 135% Genoa, with Sheets
• Complete Standing and Running Rigging
• Anodized Aluminum Mast and Boom
• Main & Jib Halyards Led Aft to Cockpit
• Internal Halyards

SAIL HANDLING & EQUIPMENT

• Cockpit Mounted Traveler with Controls
• Boom Vang, Adjustable
• Winch Handle
• Genoa Tracks and Blocks on Adjustable Cars
• ( 2 ) Primary Winches
• Jiffy Reefing on Boom
• Pre-stretched Dacron Sheets & Running Rigging
• Halyard Pockets on Bulkheads in Cockpit
• Low Stretch Halyards

DECK HARDWARE

• Comfortable Cockpit with Contoured Coamings
• Cockpit Seat Locker
• Fuel Storage Locker
• Vinyl Coated Lifelines
• Mooring Cleats, Fore and Aft
• Waterline Stripe, Midwatch Blue
• Midwatch Blue and Silver Sheer Stripes
• Stainless Steel Bow Pulpit
• Stainless Steel Stern Pulpit
• Stanchions, Stern Rails, and lifelines with Pelican Hooks
• Manual Bilge Pump with Thru Deck Handle
• Opening Forward Hatch
• Self Bailing Cockpit
• Molded In Non-Skid Surfaces
• Fiberglass Composite Fixed Rudder w/ Varnished Wood Tiller
• Adjustable Hiking Stick
• Trailer Bow Eye
• Stainless Steel Mast Step
• Teak Interior Trim
• Storage Lockers under Berths
• Overhead Lighting
• Molded Headliner, Low Glare Texture
• Fiberglass Hull Liner
• White Vinyl Interior Cushions with Blue Piping
• Large Removable Ice Chest
• Zippered Storage Compartments ( 2 ) in Cabin

ELECTRICAL SYSTEM

• 12 Volt Electrical System with Control Panel
• Battery, 12 Volt
• 12 Volt Lighting Throughout
• Navigation Lights to International Rules
• Cabin Lights
• Steaming and Anchor Light on Mast

OPTIONAL EQUIPMENT

• Cockpit Cushions , Vinyl White
• Mast Carrier
• Self Contained Head with Privacy Curtain
• Galley Unit with Basin and Stove
• Stern Boarding Ladder
• Outboard Bracket
• Canvas Package ( 1 ) Mainsail Cover ( 2 ) Winch Covers ( 1 ) Tiller Cover, Captains Navy
• Whisker Pole
• Headsail Furling Gear
• 155% Genoa w/sheets in Lieu of Std. Jib
• 150% Furling Genoa with UV Panels and Sheets In Lieu of Standard Jib
• .75 oz. Radial Head Spinnaker Color
• Tall Rig Mast with Sails, Main and 135% Jib, In Lieu of Standard Rig and Sails
• 155% Genoa W/Sheets ( Tall Rig ) in Lieu of Standard Jib
• 150% Furling Genoa w/UV Panels ( Tall Rig ) in Lieu of Standard Jib
• .75 oz. Radial Head Spinnaker ( Tall Rig )
• Galvanized Trailer for Fin Keel w/brakes, Tongue Jack
• Galvanized Trailer for Wing Keel w/brakes, Tongue Jack
• Performance Package: Symmetrical Spinnaker Gear Including Pole, Sheets, Foreguy and Halyard Lead Aft to Cockpit Main and Jib Halyard Winches on Cabin Top, with Clam Cleats, Backstay with Adjuster Purchase

FIND YOUR LOCAL DEALER

Proudly owned, designed & built in america, additional resources.

• Brochure Archives
• Associations

PARTS & TECH SUPPORT

727-544-6681

7200 Bryan Dairy Rd

Largo, FL. 33777

People say the J/22 is the best sailing boat they’ve ever been on. It’s responsive, stable with a fixed lead keel and safe, as much fun to singlehand with main only as it is to plane under spinnaker in 18 knots of wind. J/22 at 1800 lbs can be towed behind an SUV and be launched with the local yacht club hoist. With its easy-to-rig, deck stepped mast, you can be from trailer to sailing in 30 minutes. The key to J/22’s success is its durability. Hulls and decks are built with Baltek cored laminates to withstand years of hard use. 12-15 year old boats routinely win major J/22 championships.

The boat that appeals to all ages and skill levels is now generating more interest than ever before. With new boats under construction and available in Rhode Island, you can have world class speed right out of the box.

J/22 Specifications

Which Sailboat?

Catalina 22 Review

The Catalina 22 is the most commercially successful sailboat of all time and is one of the 5 inaugural members of the American Sailboat Hall of Fame.  Frank Butler of Catalina Yachts  designed the Catalina 22, which was Catalina’s first production boat.  Since 1969, Catalina Yachts has built and sold over 16,000 Catalina 22s.  Catalina continues to manufacture this boat to meet continued sprightly demand.  Continued market demand and production of a family cruiser and racer of this size contrasts with the next two models up in Catalina’s line, the Catalina 25  and the Catalina 27, which are no longer produced.

The Catalina 22 is an excellent day sailer, racer, and weekender.  She has classic Catalina lines and port light configuration that many sailors find timeless.  Although Catalina has updated the Catalina 22 throughout its production run, early boats remain modern-looking and attractive by today’s standards.  Many sailors will prefer the lines of the earlier boats over the lines of the most recent.  With its light displacement and available swing keel, the Catalina 22 can truly be considered a trailer-sailer by any modern standard.

Unlike many builders of sailboats available on the used boat market today, Catalina remains in business, and continues to manufacture and source parts for the Catalina 22.  Catalina 22 owners benefit from  Catalina Direct , which makes buying many  Catalina 22 specific parts  very convenient.  As an aside, it’s worth noting that Catalina Direct is a dealer for Catalina Yachts and is not run by Catalina, the manufacturer.  With the vast majority of Catalina 22s still afloat, the boat has a huge user base and a very active owners’ association with racing, the Catalina 22 National Association .  Many owners of the Catalina 22 report that the plethora of information available from other owners, that the manufacturer was still in business, that a version of the boat continues to be manufactured, and that spare parts were readily available, were key points influencing their decision to purchase a Catalina 22.

EVOLUTION OF THE CATALINA 22

Catalina produced the original Catalina 22, called the Mark I, until 1995.  In 1973, a fin keel was offered in addition to the swing keel.  In 1976, a stronger heavier mast was introduced.  In 1986, Catalina introduced the “New Design”, which saw revisions to the rigging but not to the sail dimensions, aluminum trimmed port lights replaced with smoked plexiglass, interior layout changes, addition of a separate fuel locker and battery compartment, moving the forward hatch aft of the foredeck to the cabin house, and addition of an anchor locker.  In 1988, a wing keel option was offered in addition to the swing and fin keels.  In 1995, Catalina introduced the Catalina 22 Mark II, which included revisions to the hull above the waterline, cabin house and port lights, interior layout, pop-top, and offered additional interior options.  In 2004, Catalina introduced the Catalina 22 Sport.   For the Catalina 22 Sport, Catalina redesigned nearly the entire boat except for the hull, keel, rudder, and sail plan, which were left the same so that these boats could compete in one-design racing.

Catalina introduced an additional 22 footer, the Catalina Capri 22, in 1984. This boat has a different underbody from all of the above Catalina 22 boats and is not eligible for Catalina 22 one-design racing.  Catalina continues to manufacture this boat, today called the Catalina 22 Capri .

CONSTRUCTION

The build quality of the Catalina 22 is good for its intended purpose as a daysailer and weekender for inland and protected waters.  The hull is solid hand-laid fiberglass.  Some Mark I models had plywood stringers, which can rot.  The deck is fiberglass sandwich with a plywood core.  The hull-to-deck joint is Catalina’s preferred shoebox design, but only fastened with screws and chemical adhesive which are sufficient for the boat’s intended cruising grounds.  Interior fit and finish is excellent for this size and class of production boat.  The interior is a molded fiberglass liner.  Interior woodwork is an attractive and durable marine ply with teak veneer with some solid teak pieces for structural loading.

All standing rigging is stainless steel.  Catalina 22s built before 1977 had a lighter, weaker mast, and lighter gauge standing rigging.  These early boats were not designed to carry a headsail greater than a 110%.  A few of these earlier boats suffered mast failures when carrying a larger genoa. In 1978, Catalina fixed this issue on all new Catalina 22s by installing a stronger, heavier mast and heavier gauge rigging that could support the greater loads associated with larger headsails.

Minor blistering was an issue on some earlier Catalina 22s, which was a common issue for boats manufactured during that period.  Hull blistering issues are hit and miss, with some Catalina 22 owners reporting never having any.  Due to the long production run and improvement of fiberglass technology during this time, blistering issues were reduced in each successive year, and were nearly non-existent by the mid-1980s.

As with all early Catalina boats that had aluminum trimmed port lights, leaking is a common problem.  Catalina Direct offers a Catalina 22 specific  kit to reseal these port lights.

On Mark I boats, the electrical panel was installed on the side of the aft dinette seat where it can be damaged by kicking when moving about the cabin and by water intrusion between the hatch boards.  Some owners install kick plates over the electrical panel to protect the switches.  Due to the relatively simple electrical systems on the boat, moving the electrical panel to a better location is only a small project.  For the New Design, Catalina moved the panel to the shelf in the port side of the hull.  Catalina moved the panel again for the Mark II model, placing it beneath the companionway steps, which returned it to the same location issues as the Mark I boats have.

Early Catalina 22s came from the factory with through-hull plumbing fittings secured only by single hose clamps, instead of two.  This is of course easy to fix if not done already.  Early boats also had gate valves installed for through-hulls, which was common at that time.  Gate valves should be replaced with proper seacocks.

The Catalina 22 is a masthead sloop with a sail-area-to-displacement ratio of around 18 (depending on keel), which puts her traditionally in a medium-cruiser class.  The mast is deck stepped with a compression post below decks to support the mast.  The mast is supported by one set of spreaders and one set of upper shrouds, and two sets of lower shrouds.

Some Catalina 22s came equipped from the factory with boom vangs, while others did not.   Catalina 22 specific boom vang kits are available from Catalina Direct.  All boats came with an adjustable mainsheet traveler.  The jib car tracks are very short, but this is not likely an issue for the vast majority of sailors who will rarely adjust the location of their jib cars anyway.  A small winch and clutch is installed on each cockpit coaming to manage jib sheets. No halyard winches were installed from the factory, but clutches were typically installed at the aft end of the cabin house so as to be accessible from the cockpit.

Catalina has deliberately never changed the dimensions of the rig during the entire production run so that any Catalina 22 regardless of year can compete in Catalina 22 one-design racing.

KEEL AND RUDDER

The vast majority of Catalina 22s were delivered with a swing keel.  Over the production run, Catalina introduced two additional keel options, a fixed fin and a fixed wing.  The fin keel has a draft of 3′ 6″ and provides 765 lbs. of ballast.  The wing keel has a draft of 2′ 6″ and provides 708 lbs. of ballast.

The Catalina 22 swing keel warrants its own discussion.  On earlier boats, the swing keel was cast iron and in later boats, cast lead. Beginning with the Mark II model, all swing keels were encapsulated in fiberglass.  The swing keel weighs 452 lbs. and serves as all of the ballast for the boat. The heavy weight of this swing keel prevents many of the annoying banging noises associated with unballasted swing keels. The keel can be raised by way of a simple and reliable manual winch system located below the companionway steps. Little effort is required to operate the winch.

The swing keel pivots from a down position to an aft-and-up position on a 1” diameter cast bronze rod hung between stout cast bronze hangers mounted to the underside of the hull. When down, the keel provides a 5′ draft, which is very deep for a boat of this size.  When the keel is fully raised to its horizontal position, the Catalina 22 has a draft of only 2′, which is of course handy for gunkholing or if the water gets shallow when exploring. In the event of a grounding, the keel gently swings back and away rather than getting damaged or causing damage to the hull as can happen with fixed keels and vertically lifting (not swing) keels.  When the swing keel on the Catalina 22 is fully lowered, the keel orientation is high aspect and has a symmetrical foil shape, similar to modern race boats, so that the boat points to weather extremely well and tacks on a dime. When completely raised, only a small part of the keel is enveloped in the hull, with the rest protruding. Therefore when the keel is fully raised, the keel orientation is very low aspect, making for nearly a full keel configuration, enabling the boat to track well with little helm attention, even when sailing downwind.

Catalina recommends that Catalina 22 swing keel hardware be inspected every two years if in a salt water environment, and allows for longer if in fresh water. However, some owners in fresh water environments report never inspecting their swing keels after thirty years of use and have no problems.  Catalina also recommended a retrofit be performed on earlier Catalina 22s to reduce the side-to-side movement of the keel along the pivot pin, which could cause the keel to wear through the pin.  If not already done, owners should perform or have this retrofit performed.  A retrofit kit is available from Catalina Direct.

Despite the early swing keels being cast iron, Catalina did not typically install a sacrificial anode on Catalina 22s at the factory.  Catalina 22s should have a sacrificial anode installed, especially if in salt water, although owners of fresh water boats without sacrificial anodes have reported little corrosion.   Sacrificial anode kits , including the drill bit necessary to go through the cast iron, are available from Catalina Direct.  Catalina 22s produced from 1995 onward had the cast iron keel encapsulated in fiberglass, which further reduced potential corrosion issues.

The Catalina 22 has a transom hung rudder commanded by a tiller.  Mark I boats came with a kick-up rudder that may avoid damage if grounded, and can also be secured up when in shallow waters using the factory-installed rudder rigging.  New Design and later, boats were delivered with a solid rudder instead of the kick-up model.  The solid rudder can provide better sailing performance but can be damaged when the keel is raised in shallow waters because the rudder extends beyond the depth of the raised keel.

SAILING CHARACTERISTICS

The Catalina 22 has a very flat canoe body and beam carried well aft resulting in excellent initial stability, and low wetted-surface area contributing to speed.  The boat has a relatively deep forefoot, which prevents the flat body aft from pounding.  Catalina 22s are stiff, and if knocked down, right themselves quickly.  The swing keel is the least ballasted of the boats and is the most tender.  The fin keel is the most ballasted and most stable version.

All three keel configurations sail well on any point of sail.  Catalina 22 owners consistently refer to the boat as “forgiving”.  The swing keel performs the best to windward due to its deep and high-aspect orientation when lowered.  Due to its extremely low-aspect when raised, the swing keel can also perform the best running with the wind.  The fin keel performs better on all points of sail than the wing keel.

The Catalina 22 easily achieves hull speed in light-medium airs.  Many Catalina 22 owners report preferring to reef when winds reach above 10 knots, while others report never reefing even with much higher wind speeds.  The boat has a tendency to round up into the wind when over canvassed, which can count as a safety feature.

Unlike smaller day sailers, the cockpit of the Catalina 22 provides a very secure and dry ride.  The cockpit is large (larger than its bigger sister, the Catalina 25 ) with a moderately deep sole and wide benches.  Leaning against the bulkhead at the forward end of the benches provides an excellent lounging position facing aft.  The coamings are moderately high, which add to a sense of security when seated.  The benches are long enough for sleeping when overnighting or weekending.

On Mark I boats, the cockpit sole slopes forward so that scuppers are necessarily located at the forward end of the cockpit.  On any boat with cockpit scuppers located in the sole, keeping the scuppers free from debris, especially when the boat is not being used, is a common maintenance concern.  Clogged scuppers can lead to cockpit flooding in heavy precipitation, and eventually flooding below decks.  The scuppers drain through plumbing connected to a y-fitting and then a through-hull fitting beneath the companionway steps.  Catalina Direct offers a kit to install additional scuppers in the transom of the boat to aid the factory installed scuppers.  With the New Design, Catalina began installing scuppers that drain through the transom.

Beneath the port cockpit bench is a relatively large lazarette, accessible from a hatch at the aft end of the port bench.  The lazarette is not big enough for sail storage but works well for storing lines, bumpers, and other equipment.  On Mark I models, this lazarette also functions as a fuel locker, which is functional because the locker is not open to the interior of the boat or the bilge.  The lazarette is vented to the outside by cowlings on the side deck.  The sole of the lazarette slopes downward to forward so that fuel fumes can accumulate in the lazarette.  Some Mark I owners report that fuel fumes can seep through the bulkhead at the forward end of the lazerette into the cabin.  For the New Design, Catalina improved this design so that the fuel tank was separated from the lazarette and vented to the cockpit.  Some Catalina 22s came equipped with a manual bilge pump mounted in the port lazarette, with the pump handle accessible from the cockpit.

A boarding ladder hung from the transom on the starboard side was optional.  While boarding ladders are an easy fit to most any boat, a Catalina 22 specific boarding ladder is available from Catalina Direct.

Moving forward from the cockpit, the side decks are necessarily narrow.  For a boat of this size, the side decks are excellent.  Many boats of this size eliminate side decks all together, especially newer designs, requiring sailors to cross over the cabin house to access the foredeck, which is disastrous in appearance.  Butler maintained the boat’s good lines and proportions by keeping side decks, even if narrow.  Some owners remove their lifelines, which generally looks attractive, and in this case makes moving along the side decks easier.  Considering the limited effectiveness of the lifelines due to their low height, their removal may add to safety aboard on any Catalina 22 unless small children will be aboard.  Due to the size of the boat, there is always some rigging to hold within arms’ reach.

The foredeck is a good size for managing a foresail and includes a sufficiently secure bow pulpit.  On Mark I boats, there is a large hatch in the center of the foredeck, which opens to the v-berth below.  On New Design boats, this hatch was moved aft to the forward end of the cabin house, which improves the foredeck for sail handling.  On Mark II boats, this hatch was changed from solid fiberglass to smoked plexiglass.  Due to the rising sheer line of the forward end of the deck, the plywood core in the foredeck is prone to rot if the watertightness of the foredeck fittings is not maintained.  Many owners have addressed rotted cores with various techniques that involve removing the rotted core from below decks.  Addressing this issue from below leaves no adverse blemishes on the foredeck.

Mark I Catalina 22s have no anchor locker.  Many Mark I boats are fitted with an anchor holder mounted on the bow pulpit.  For any Catalina 22 not already outfitted with one, anchor holders are available from Catalina Direct.  Catalina introduced an anchor locker with the New Design.

The Catalina 22 has Catalina’s traditional wide companionway with three hatch boards.  With the hatch boards removed, the interior of the boat is greatly opened.  This companionway is an excellent place to stand while under sail from which all operations of the boat can be observed and guests in the cockpit tended with food and beverages.

Headroom is limited at 4′ 4″, which owners report is great for their children.  In 1973, Catalina began offering the pop-top as an option, which swings up on 4 stainless steel struts and increases headroom to 5′ 7″.  Catalina modified the pop-top for the Mark II model, replacing the struts with a hinge at the forward edge, making it easier to raise.

Below decks, there is a wide but short v-berth forward with a removable central insert at the aft end.  On Mark I, New Design, and Mark II boats, beneath the central insert is a large storage area open to the salon.  Many owners keep port-a-potties in this space and some install marine heads.  Some Catalina 22s were delivered from the factory with marine heads installed in this space.  Also beneath the v-berth are two smaller storage areas.  The aft end of the v-berth can be enclosed with the factory-installed curtains, which offers some privacy if used as a head area.

On the New Design models, there is an icebox to port a centerline sink between the aft end of the v-berth and the forward dinette seat back.  To starboard there is a two burner stove and a drawer beneath.  Some owners remove this stove, leaving a deep shelf for storage.

Aft to starboard is a settee long enough for sleeping.  On the Mark I models, aft to port is the dinette, which can seat two adults and two children.  Outboard of the starboard settee, and the dinette to port, are shelves built into the hull.  There is storage beneath the starboard settee, the dinette seats if on the Mark I model, and the port settee if on the Mark II model.  On the Mark II model, the port settee continues aft beneath the cockpit, making the port settee long enough for sleeping.  Aft of the starboard settee is the “Captain’s Quarter Berth”, which is uncomfortable as a berth due to low headroom.  Most owners use this space for storing whisker poles, boat hooks, camp stoves, oars, and similar long and flat gear, or mounting radios and other equipment.  The aft most end of this quarter berth is accessible from a hatch in the cockpit.

For Mark I and Mark II boats (but not the New Design boats), Catalina offered a galley that would slide out from under the quarter berth for use.  On Mark I models, the slide-out galley included a sink, two burner stove, icebox, and storage drawer.  On Mark II models, the galley was smaller, and only included a sink and single burner stove.  The icebox was moved to and became an integral part of the companionway steps.

For the Mark II models, Catalina made the interior more spacious by widening the hull above the water line and widening the interior by 10″.

VENTILATION

The Catalina 22 has no opening port lights, but none are necessary.  Ventilation on the Catalina 22 is excellent.  The large forward hatch funnels air into the cabin when under sail.  At the dock, owners report that a box fan can be placed in this hatch to effectively force air throughout the cabin.  The pop-top opens the entire salon dramatically. The large companionway contributes to this openness as well.

AUXILIARY POWER

The Catalina 22 is powered by an outboard motor hung on the port side of the transom on an adjustable mount.  Long shaft motors are preferred.  A 5 h.p. motor is more than adequate for pushing the boat even in rough conditions.  Many owners report having Catalina 22s equipped with less powerful motors without issue.

With a maximum displacement of 2490 lbs. or less depending on keel model, the Catalina 22 is easily pulled without a powerful truck as a tow vehicle.  The light weight also enables the Catalina 22 to use a single axle trailer, although the trailer wheels should be of the 5-lug type.  The swing keel and relatively flat bottom also mean that many powerboat trailers can be easily modified to support the Catalina 22.

USED CATALINA 22 MARKET

Catalina 22s can be found on the used boat market typically ranging anywhere in price from $2,000 to $22,000, mostly depending upon age and condition, installed equipment and upgrades, and whether or not a trailer is included in the sale. However, derelict project boats occasionally pop-up for much less. Due to the ubiquity of the Catalina 22, it is always easy to find one for sale on Craigslist, Sailboat Listings, Sailing Texas, and other venues, and there are a plethora on Yacht World. If shopping for a Catalina 22, make sure all swing keel maintenance has been performed or be prepared to do it. Check early boats with aluminum trimmed windows for leaks, which was common but easily repairable. Check for foredeck core rot, stringer rot, and hull blistering, which were hit and miss problems on earlier boats. Otherwise, there is nothing special to consider with these boats that you would not for any other boat.

Special thanks to Jeremy Smith for his contributions to this article.

ADDITIONAL RESOURCES

Catalina 22 Mark II Brochure

Catalina 22 Sport Brochure

Catalina 22 National Association

Catalina 22-Specific Parts Available from Catalina Direct

Catalina 22s Available for Sale on Craigslist, Nationwide

FAMILY CRUISING (SAILING AWAY) ON A CATALINA 22

CATALINA 22 RACING

LAUNCHING A CATALINA 22

Share this:

6 thoughts on “ catalina 22 review ”.

Had no idea that a Catalina was that affordable! Definitely going to get a yacht someday soon!

Excellent review. The only suggestion that I can make is that a matrix that compares the various features and problems of each model and age boat would be extremely helpful. I will use this review as my guide for the purchase of a Catalina 22. Congratulations on a very professional job.

Jim Vaughan Grass Valley, Ca

• Pingback: Used Catalina 22 | Pualwalker

Great informative article! Thanks for sharing your wealth of knowledge!

Great review that I will keep going back to for more research on things I had to skip over. I’m a senior age guy and have spent my life boating and commercial fishing but never sailing. I’m definitely going to buy a Catalina 22. This boat was recommended to me by my sailing instructor Gary of Outercape Sailing in Wellfleet Massachusetts. I live in Provincetown Massachusetts with a great harbor and Cape cod Bay. I’m so thankful for all this information. Thanks Peter Cook

Thanks for all the help. I am looking to purchase one right now but on all sites they are minimal at best. Can’t blame the people for not wanting to get rid of one unless trading up. Thanks again.

Leave a comment Cancel reply

Blog at WordPress.com.

• Already have a WordPress.com account? Log in now.
• Subscribe Subscribed
• Copy shortlink
• Report this content
• View post in Reader
• Manage subscriptions
• Collapse this bar

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• 22 Foot Sailboats

22 Foot Sailboats Boats for sale

22 foot Portager sloop sailboat

Holt, Michigan

Make Portager

Category Daysailer Sailboats

Length 22.0

Posted Over 1 Month

I have owned the boat for the last 22 0+ years, and have had great times in sailing all sorts of weather on Lake Michigan. Overnighters, day sails, weekends with the family - great memories. She sails well, though not a racer. I have single handed her, and have had as many as 8 on board at a time. We've slept 2 adults and 2 kids on her at a time. No galley, and no head, though there is a camp potty stowed on board. She comes with depth gauge, compass, radio, PFDs, fire extinguisher, and more. The engine is a 6 hp, 2 cycle Yamaha long shaft that starts every time. Includes 2 fuel tanks. The trailer is tandem axle, and pulls just fine.

ENSIGN 22.5-foot SLOOP with 5hp HONDA OUTBOARD and FOUR SAILS

New York, New York

Make Pearson

Model Ensign

Length 22.5

In the words of the Ensign Association, "The Ensign is the largest class of full keel sailboats in North America, with over 2000 boats manufactured since 1962. Designed by Carl Alberg, its sustained popularity is due to very solid and durable construction, and a design that lends itself equally and admirably to comfortable family cruising, enjoyable day sailing, and close, strategic, tactical racing. As a family day sailor, the Ensign has a large, deep cockpit, with enough room to comfortably seat six to eight adults. Its full keel provides a secure, stable ride, and its three foot draft makes it perfect for the shallower waters of bays and lakes and for anchoring fairly close to a protected shore. The cabin space is more than adequate for keeping lots of gear dry, for providing immediate refuge from rainy weather, and can even sleep a couple of people... even more if they are friendly." The Ensign is also a fine racing boat, with fleets at several locations in the New York area."Azores" is in top condition. It has a mainsail, a working jib, and #1 and #2 genoas, all in top condition. The 2013 5hp Honda outboard engine is in excellent condition, with less than 25 hours of use. Included are a cockpit cover, a new marine radio; a new, unused head; a 9-foot rubber raft, never used; a wheeled cradle for winter storage, and an overboard ladder. The hull below the waterline and the woodwork were painted last winter. Although the boat lacks a spinnaker, it has all the deck hardware to mount a spinnaker. Hardware includes two coffee grinder winches, boom vang, two sets of jib sheets, a boom runner, and other hardware and lines.I bought "Azores" several years ago and find that at age 87 I can no longer easily manage it. "Azores" is moored at the Sheepshead Bay Yacht Club at 3076 Emmons Avenue, Brooklyn, New York 11235. I will deliver it there. A payment of $500 is due within three days of agreement. the balance is due on transfer of title.

1989 J Boats J/22

Gilford, New Hampshire

Make J Boats

Category Sailboats

1989 J Boats J/22 Tis J 22 is here at our showroom, on its trailer. It comes with Main Jib, and spinnaker, as well as a 2011Mercury 4/HP 4 stroke motor. This would be a great entry level day sailor, that will allow one to grow into a fun, and excellent handling sail boat.  The J-22 is the choice of one-design fleets and institutional sailing programs worldwide, because she has proven to be a great value and a favorite among juniors and adults alike. The hull and deck are unyielding Baltek-cored laminates. All the gear is first class, ensuring minimum maintenance, optimum performance and ease of handling. J-22 has a comfortable self-bailing cockpit with 7-foot long seats and room for four to six people in the cabin to escape the rain or cold.  J-22 is built for safety with buoyancy tanks and offshore hatches. Her 700-pound lead keel lowers the center of gravity, creating nearly 1,700 foot-pounds of righting moment at 90 degrees of heel. In 1995 there were 1,200 J-22s sailing in 61 active fleets in eight countries on three continents, which qualifies J-22 for IYRU International status. The J-22 Class Association promotes activities worldwide, publishing a yearbook and newsletters. For class racing, sails are restricted to main, small jib and spinnaker with total crew weight at 605 pounds. Its PHRF rating is 180 s-m.

1975 Catalina 22 Pop Top Sailboat and Trailer - Project

Martinsville, Indiana

Make Catalina

1975 Catalina 22 Pop Top Project Sailboat and Trailer The Catalina 22 is a popular sailboat produced by Catalina Yachts. Its hull measures 21 foot 6 inches (6.55 m), which is rounded up to 22 feet (6.7 m) for use in the model's name. First produced in 1968, it is one of the longest continuously produced sailboats in the world...Over 15000! Parts, videos and know-how are abound on the net 2005 last time previous owner had boat in water. I have never had boat in the water or was able to work on her. 2005 was the last time I was inside the cabin before preparing this listing for ebay. She has been closed up for ten years and is dirty in and out. I sprayed Windex in a few areas inside and dirt just wiped off with no scrubbing. Water, at one time, intruded around the forward hatch. Has complete set of interior cushions in gold plaid pattern. Most are in surprising good condition. NO SMELLS. One has a 1.5x1.5 inch hole in fabric that isn't seen when in place. 1 or 2 have an area of cracking vinyl. In all the noted exceptions, I don't think they would be seen or stop you from sailing PREVIOUS OWNER'S DESCRIPTION: '75 Catalina 22 pop top w/trailer • fair condition - Project boat • Swing Keel • Pop top • Sail Inventory: 2 mains, Jib (Marked San Juan works w/Cat 22s) and 150 Furling I think all are usable • Scupper upgrade in transom • Ablative paint on hull and keel • Never in salt water • Needs good cleaning • I know of no problems with the swing keel • No known leaks around keel pin • Comes with 2 Rudders. Usable but not perfect • Port side blemish in the gel coat • One pop top support needs to be re-bedded • Front hatch needs the frame reinstalled and sealed • Soft spot forward of hatch • Crack in cabin threshold but does not affect anything much • Cracks and crazing in the deck gelcoat that need filling • One stanchion base needs to be re-bedded • Small dent/crack in mast near stays, like pinched on one side at the spreaders. When raising the mast, one of the stays was caught and pulled the spreader forward. See photo. A pontoon boat repair guy told me that a braze could patch for about $25 • Needs halyards but I would get all new running rigging • Replace Hatch Boards or just cut a Plywood Hatch • Standing rigging, I am no judge but it worked when last used and it has been out of the elements since. • The forestay also has a quick-release lever purchased from Catalina Direct, along with quick-release pins for quicker and easier mast- raising and lowering. Those parts are, of course, stainless steel. • Will also include a sliding galley out of a 1984 Cat 22. It slides under the cockpit starboard seating when not in use. It has a faucet, sink, water fresh water holding tank, a drawer and a place for a small portable propane stove. I was going to sell it separately on ebay. They normally go from 150-200. TRAILER • Trailer in good shape, but could use some paint• Has 10 ft extension• Has surge brake system used for two trips since it was installed• Has Buddy Bearings• New load range 'C' tires were put on in Spring of 2010. 63 Miles total mileage as boat was towed from one of our rental homes to our house in Martinsville. No cracks or aging seen.• Extra duty bunks BTW: Good used trailers for sailboats are hard to come by. Have clear titles for boat and trailer. I have described everything I know about her to the best of my ability but I am no sailor. Somethings may be better and others may be worse. She is a project boat and sold as is. This is for local Pickup in Martinsville, Indiana (Just south of Indianapolis) An immediate non-refundable PayPal deposit of $200 is required upon purchase. Balance due in CASH when picked up. No checks or money orders of any kind. Pickup within 7 business days of end of listing. This is not an auction. Will be happy to answer questions Thanks for looking and your interest

1975 Catalina 22 Pop Top Project Sailboat and Trailer

1975 Catalina 22 Pop Top Project Sailboat and Trailer The Catalina 22 is a popular sailboat produced by Catalina Yachts. Its hull measures 21 foot 6 inches (6.55 m), which is rounded up to 22 feet (6.7 m) for use in the model's name. First produced in 1968, it is one of the longest continuously produced sailboats in the world...Over 15000! Parts, videos and know-how are abound on the net 2006 last time previous owner had boat in water. I have never had boat in the water or was able to work on her. Selling because soon after buying her, a heart problem took the wind out of my sails. Thought I would sooner or later, but unfortunately I will never be able to sail her. The following is description of previous owner: '75 Catalina 22 pop top w/trailer • fair condition - Project boat • Does not include motor (One available for a separate purchase) • Swing Keel • Pop top • Has sails, usable • Scupper upgrade in transom • Ablative paint on hull and keel • Complete set of interior cushions in gold plaid pattern are in decent condition • Never in salt water • Needs good cleaning • I know of no problems with the swing keel • No known leaks around keel pin • Rudder is good, but not perfect • Port side blemish in the gel coat • One pop top support needs to be re-bedded • Front hatch needs the frame reinstalled and sealed • Small crack in cabin threshold but does not affect anything much • Some cracks and crazing in the deck gelcoat that need filling • One stanchion base needs to be re-bedded • Small dent/crack in mast near stays, like pinched on one side at the spreaders. When raising the mast, one of the stays was caught and pulled the spreader forward. It pushed into the mast, and the mast has a small crack in it of approx. one inch. A aluminum boat repair guy told me that a weld could patch for $25 • Needs halyards but I would get all new running rigging • Replace Hatch Boards or Just cut a Plywood Hatch • The forestay also has a quick-release lever purchased from Catalina Direct, along with quick-release pins for quicker and easier mast- raising and lowering. Those parts are, of course, stainless steel. TRAILER • Trailer in good shape, but could use some paint• Has 10 ft extension• Has surge brake system used for two trips since it was installed• Has Buddy Bearings• Good tread on tires• Extra duty bunks BTW: Good used trailers for sailboats are hard to come by. Have titles for boat and trailer She is a project boat and is sold as is. I will cannot entertain low balling, consider trades, or Ebayers with negative feedback. This is for local Pickup in Martinsville, Indiana, just south of Indianapolis. An immediate non-refundable PayPal deposit of $200 is required upon purchase. Balance due is to be paid within 7 business days in cash only. No checks or money orders of any kind. You may pay balance via PayPal prior to picking up the boat. This is not an auction. Will be happy to answer questions Thanks for looking

sailboat 22 foot Chrysler Pagen 1975

Akron, Ohio

Make Chrysler

Model Pagen

I bought this in Michigan last year with the 10 hp chysler with electric start...I brought it home and cleaned the exterior as it sat for many years...the motor and sails are in excellant condition and where alway stored inside . The interior needs cleaning and paint on the trailer and as all sailboats a good once over...the motor is guaranteed to run smoothly and I also put brand new tires and rims on with a spare if you plan on hauling it a long way (also greese bearings)needs lights but will install before you pick it up...possibly could meet you part way or deliver for fee? I had a fixed keel sailboat and hated the fact that I was stuck paying launch, dockage and storage fees and will never buy another boat I cant store and launch myself ....The draft is a little over a foot with this swing keel that makes it perfect for just about any launch at any lake. I recently became a grampa,my career is changing and Im looking to buy a house...so I have no time to sail this year and more then likely for many summers to come...Ill buy it back in 3 or 4 years from you if you decide to sell it... as it to me is the perfect boat. You will save the price of this boat in 1 year what you would pay in storage ,dockage and lift fees...My loss is your gain... more pictures to follow:

1972 MORGAN 22 sailboat - fully equipped, ready to sail, Sarasota, FL

Sarasota, Florida

Make Morgan

Category Sloop Sailboats

1972 MORGAN 22 sailboat - fully equipped, ready to sail - MAKE AN OFFER Enjoying as an equipped live aboard - swing keel centerboard boat. Everything in good shape, ready to sail away, all required safety gear, extra anchor, 4.5hp Evinrude kicker runs fine, newly painted cabin top and deck On a mooring at Sarasota, FL. Marina Jack 1972 all fiberglass Morgan sloop - Evinrude is around 1985 - starts and runs fine ALL THE FOLLOWING IS INCLUDED: 8' dinghy KAYAK. Complete required safety gear (all up to date) Stainless burner (propane), large 8 foot bimini, canvas sunshade, plenty of dock lines, clean port-a-potty, 2 anchors and chain, water hoses. Small portable solar panel - charges a new deep cycle battery. Evinrude 4.5 starts every time - uses very little gas. 3 gal. tank PLUS 6 gal. backup tank. 2 sails - main and jib. Jib is hanked on. No blisters and bottom is cleaned regularly.

1982 Stamas 44

Miami Beach, Florida

Make Stamas

1982 Stamas 44, This is a Stamas 44 ketch center cockpit, designed and built by Bob Johnson, who went on to design and build Islands Packet sailboats.A/C, bow thruster, 100 hp new engine, custom woodwork in salon, 1000 hr house bank...This boat looks, and is built, like an Island Packet - a true, heavily built fiberglass bluewater boat capable of sailing around the world.The salon has a lot of headroom, and huge wrap around windows for a sailboat. The original owner took out the original windows, and had a custom steel frame installed with half inch plexiglass windows.Master aft cabin with head and dedicated shower, and v-berth with it's own head and shower. Both heads recently rebuilt. New macerator pump and thru hull. 320 gallon fresh water tank. 110 gallon diesel fuel tank. 30 gallon holding tank.98 lockers onboard. The boat has a tall freeboard, carries her 14 foot beam a long way aft, and has tonnes of storage room. Great cruiser.She's 22.5 gross tonnes, 30 000 pounds displacement, 14 beam, 5'1" draft, and fits under the ICW bridges at around 63 feet tall.She spent most of her life in Lake Ontario Canada's fresh water, and I brought her south three years ago after buying her from my parents.It's been in the family for the last 18 years, and has had over $200 000 spent on her in the last ten years upgrading and adding to her.Some upgrades include; new yanmar 100 horsepower turbo diesel ($25k), bowthruster ($17k), rack and pinion steering ($17k), new Mack headsail and mizzen sail ($12k), new feathering prop ($6500), custom interior woodwork, wood floors installed, new Atkins and Hoyle davits 750 pounds limit, avon 11'2" dinghy and 20 horsepower Honda outboard (2003), new frigoboat deep fridge/freezer, ceramic stovetop, washer/dryer, bar fridge, new raymarine autopilot with handheld remote, new hot water heater, new inverter/charger, bilge pumps, all batteries new (11), 10 year old 16500 btu air conditioner barely used until this year, new air conditioning water pump and service, new foam and upholstery, cockpit cushions, center console, windmeter, rockna anchor and chain, electrical panel and wiring for a large part of the boat, high power alternator, new bottom paint ( professionally sanded down to gel coat, two coats hard, four coats ablative ), new engine room blowers, and a honda eu2000 generator, new faucets etc etc, Needs the outside teak redone at this point, though I'll be doing that before too long, the bimini top is on its last legs, and at least needs new stitching.If you want to come see her, we could arrange for you to stay in the V-berth. We're in Miami Beach marina, in South Beach Miami Beach. We could also have a skype walk around tour of sorts beforehand. $145000

1977 Landfall Pilothouse Cutter

Poulsbo, Washington

Make Landfall

Model Pilothouse Cutter

1977 Landfall Pilothouse Cutter Beautiful Pilothouse Cutter,with double bow pulpit, and double lifelines with gates, and emergency tiller. 45# CQR and Danforth stern anchor.Her interior is very nice,she has lots of space and headroom. She has almost furniture grade finish wood interior. Her weather deck is finished with a military grade waterproof coating. 12 vdc & manual bilge pumps. Sail Inventory, Mainsail (with EZ jacks and boom crutch) Self-Tending Jib 90% (Club Foot) Roller Furling Genoa 110%. Winches 1 Lewmar Two speed 40, 2 Custom Yachts Ltd #22, 2 Custom Yachts Ltd#16, 3CY Ltd #16 on mast.

2012 Hunter Hunter 45 DS

Pompano Beach, Florida

Make Hunter

Model Hunter 45 DS

2012 Hunter Hunter 45 DS,The Hunter 45 has the brightest and most open salon ever designed. Oversized deck ports draw in huge volumes of natural light to complement the rich woodwork and airy plan, and the wraparound windshield dominates the sleek and imposing exterior profile. The Glenn Henderson-designed hull is solidly constructed and shaped for lively performance and a smooth ride, even in rough sea conditions. On deck, dual helm stations deliver the ultimate in comfort, control and visibility for the captain. Hunter's stainless steel Traveler Arch, B & R rig and a unique double ended mainsheet system provide the crew with effortless sail handling. The large galley will enable you to create memorable meals from provisions held in the huge storage areas. An expanded aft stateroom features a queen size berth, large hanging locker, fresh air ports, storage galore and private access to the aft head. Forward, your guests will enjoy the Pullman style cabin with a side mounted double berth and storage for two. The open vanity is separated from the private head and shower located in the forepeak. The Hunter 45 will elevate your sailing enjoyment to a whole new level!This vessel is absolutely amazing inside and out. She is well appointed with everything you need. The layout is perfect for entertaining. The master is extremely generous with a walk-thru bath. Easy access to the steps and rear salon.Collapsible cockpit table for entertaining. Easy access dive deck with ladder. Plenty of storage in the aft for tanks or floats and other water fun gear! Very well thought out.The foot-space around her cabin and deck is very generous. Seller states: that a dodger has been added to pink poky sails. This vessel is shown by appointment only so call today to set-up one for yourself!SpecsLength Overall 442Hull Length 421Waterline Length 392Beam 146Drab Shoal 50Displacement 22,936 lb.Ballast Shoal 7,389 lbsMast Height Furling 608Sail Area Actual (Furling) 925 b sq Great Yacht Perfect Condition 190 hours on 70hp Yanmar Engine Bow Thruster Ray marine cruise control and Navigation maps Furling Mast Plenty of storage areas Two State Rooms Two Heads Well Equiped Galley with Microwave, Stove, Separate Freezer and Refrigerator Outdoor grill AVached to Railing Snorkeling Equipment Fishing Rod Fresh BoVom Painted in Nov 2013 LED Lights installed Dodgers installed in 2015 Boss Lifestyle Sterio / DVD Player Archives Dingy includes propane powered outboard engine. $259000, 7322167555

2013 J Boats J/70

Corpus Christi, Texas

2013 J Boats J/70 The J/70 introduces a new dimension of fun, fast sailing in a stable, easy to own boat. A natural evolution of its J pedigree, the J/70's 22-foot long waterline with high aspect, all carbon rig and deep, lifting bulb keel provides spirited performance and stability that feels like a much larger boat. Knifing through the water upwind with confidence and ease, the J/70 has that legendary “J” feel - light, controllable with a wide-groove to sail consistently fast. With an adjustable cascading backstay, one has total control over sail shape and dynamic rig tension across the full range of conditions, making it not only easy to change gears on the J/70, but faster and safer. Off the wind, J/70 will simply light-up the crew with a smile! Set the masthead asymmetrical spinnaker off the retractable carbon bowsprit, point the J/70 where you want with its deep, high-aspect rudder and the J/70 pops up on a plane and takes off in a moderate breeze. SAILOR FRIENDLY J/70 is all about making sailing inclusive, not exclusive. With its easily driven hull, large cockpit, and manageable three sail inventory, the J/70 is perfect for three adults, two couples, or four juniors. Sailing is about friends, it’s the joy of sharing the experience with others. When your family and friends can enjoy sailing in all weather, the return on investment will be high. TRAILERABLE- EASY TRANSPORT & LAUNCHING In today’s crowded harbors, it’s not always possible or economical to own a permanent mooring, marina slip or rent space in a dry lot with crane. J/70 offers a practical solution. Launch at the local boat ramp, raise the lightweight all carbon rig, lower the lifting bulb keel, hoist the sails and off you go on a sailing adventure in less than 30 minutes. The only limitations are how far you want to drive and willingness to camp in the great outdoors. Trailerable behind a family minivan or SUV, you can go anywhere.   Turn key everything you need to race or sail: VELOCITEK ProStart Starting, Tactical Compass and Speed Instrument Standard Stainless Steel running rigging Backstay flicker Shroud locks Keel Crane Companionway cover Complete set of boat covers, top, rudder, tiller, boom, mast covers and jib Life line pads Dock lines and fenders Sails: 2013 Quantum mainsail 2013 Quantum jib 2013 Quantum spinnaker 2015 UK mainsail (used four times) 2015 UK jib (used four times) 2014 UK spinnaker w/Graphic (used 3 times) Trailer with LED, tie downs

1980 Catalina C22

Pittsboro, North Carolina

1980 Catalina C22 Please contact owner Alan at 919-918-three eight one four. Boat is located in Pittsboro, North Carolina. 1980 Catalina C22,Catalina 22 sailboat with trailer and motor. 1980-22ft, in fine condition. The C22 is the largest of the trailerable Catalina Sloops. The retractable keel is fantastic, this feature allows you to beach your boat! This boat comes with new bottom paint, all new stays, new electric cables, lights, and new keel cable, two fore sails; Jib and Genoa, and a 4 HP motor with long foot designed for sailboats. Trailer has new tires, bearings, spare, and extendable tongue for launching. Make: Catalina Model: C22 Length: 22 Dealer: BoatsFSBO.com ID: 219403 Ad provided by BoatingBay

Nice Nonsuch 22 Sailboat - Catboat Rig - Inboard Diesel - Located Solomons, MD

Rapidan, Virginia

Make Hinthoeller

Model Nonsuch 22

Nice Nonsuch 22 Sailboat for sale. It is in very good condition and is located in Solomons, MD. If you are not familiar with Nonsuch Sailboats, they were designed by Mark Ellis and built by Hinterhoeller Yachts. They are incredibly solid and easy to sail. The boat has the following features: Brand New North SailBrand New North Sail CoverWesterbeke 2 cylinder Diesel inboardEdson Wheel SteeringRitchie Globemaster CompassRaymarine Speed/Depth InstrumentVHF RadioDanforth 12H Hi'Tensile Anchor The boat has more room than most 30 footers. 6 foot standing head room. 6'6" bunks. Enclosed head. Hillerrange Propane stove. It sails very nicely. It is easy to handle and can be singlehanded in any conditions. Work has taken me away from the Chesapeake so I am not using it. The boat is fully equipped for weekend cruising. I am hoping that someone will know the value of these boats and give it a nice home. If you have any questions, please let me know. You can learn more about Nonsuch sailboats in general on the International Nonsuch Association website.

1995 Sam L Morse Falmouth Cutter

Bellevue, Washington

Make Sam L Morse

Model Falmouth Cutter

Category Cruiser Sailboats

Finesse, hull #33 of 39, is a rare opportunity. She is a Lyle Hess design and factory finished by Sam L Morse. The Falmouth Cutter is featured in John Vigor's "Twenty Small Sailboats to Take You Anywhere." She is trailerable (trailer not included), and she has a functional mast tabernacle for that purpose. Auxiliary propulsion by a Yanmar 1GM10 diesel engine, with 15 gal fuel tank. Converted to 330 A-hr house batteries with additional start battery. Propane stove with broiler, running fresh water, raw water foot pump, Lavac toilet with 15 gal plastic holding tank, Maritron electronics with NMEA 2000 network, Garmin VHF-300 radio, Garmin AIS-600 transponder, Technautics refrigerator/freezer, and many other accessories and equipment. An extensive equipment list is available. Finesse is extensively restored and outfitted, this bluewater cruiser is in excellent condition and ready to go. She should be seen to appreciate her. Some informative links on the Falmouth Cutter: http://www.colebrothers.com/articles9/falmouth.html http://bluewaterboats.org/falmouth-cutter-22/ https://skyaboveus.com/water-sports/The-Falmouth-22-Cutter-A-Surprisingly-Small-Cruising-Sailboat http://sailboatdata.com/viewrecord.asp?CLASS_ID=5545 http://www.capegeorgecutters.com/FC22/index.html http://www.sailingmates.com/fallmouth-cutter-review/ http://samlmorse.com/?a=falmouth_cutter https://hobosailorblog.wordpress.com/2016/01/20/falmouth-cutter-22/

1999 Marshall Catboat

Oriental, North Carolina

1999 Marshall Catboat The Marshall Catboat 22 is a rugged, sea-kindly boat with classic looks that will turn heads in any harbor. Her two foot draft will let you access anchorages and coves that are off limits to most cruising sailboats. The Marshall 22 is roomy enough for a family of four and simple enough for a couple to enjoy gunkholing their local waters. An elegant daysailor, the Marshall 22 is also a capable long distance cruiser. Many of her owners have sailed their boats from New England to Florida and even as far north as Greenland. Accommodations below compare to those found in most 30-footers. "Grace" has been sailed and maintained by her current owner and it is with some hesitation that he has decided it is time to sell her. Don't miss this opportunity to own a true classic!

Narrow Results

Current search reset all.

• Keyword: 22 foot sailboats
• Catalina (2)
• J Boats (2)
• Chrysler (1)
• Hinthoeller (1)
• Landfall (1)
• Pearson (1)
• Portager (1)
• Sam L Morse (1)
• Sailboats (5)
• Daysailer Sailboats (4)
• Cruiser Sailboats (1)
• Sloop Sailboats (1)
• Florida (3)
• Indiana (2)
• North Carolina (2)
• Washington (2)
• California (1)
• Louisiana (1)
• Michigan (1)
• New Hampshire (1)
• New York (1)
• Virginia (1)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

2016 Craigcat Elite

Crawfordville, FL

2016 G3 Boats Sportsman 17 Camo

Madison, PA

2012 Nautica Nano

Ponce de Leon, FL

2004 Sea Ray 270 Sundeck

The Lakes, NV

2007 Malibu V Ride

Montgomery, TX

2016 Chaparral 226

Myrtle Beach, SC

2010 Parker 2310 DV-Walkaround Boat and Trailer

Morehead City, NC

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Columbia 22

Columbia 22 is a 22 ′ 0 ″ / 6.7 m monohull sailboat designed by William Crealock and built by Columbia Yachts between 1966 and 1972.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Boats built after 1969 differed slightly in the location of hatches and the introduction of an outboard well. A keel/centerboard model was also available though they are said to exist only in small numbers. Draft for CB version: BU: 2.5’; BD: 4.83’. The CORONADO 23 (MKI) is similar but with a different coach roof. In the mid-70’s, some were built to this design under license in Australia. Later they were also available as kits under the Sailcrafter brand.

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Baltimore bridge collapse: What happened and what do we know about the ship?

WHAT HAPPENED IN BALTIMORE?

Why did the bridge collapse, are there any casualties, what do we know about the ship that was involved, what do we know about the bridge that collapsed.

HOW WILL THE BRIDGE COLLAPSE IMPACT THE BALTIMORE PORT?

Get weekly news and analysis on the U.S. elections and how it matters to the world with the newsletter On the Campaign Trail. Sign up here.

Writing by Lisa Shumaker; Editing by Daniel Wallis and Stephen Coates

Our Standards: The Thomson Reuters Trust Principles. , opens new tab

Thomson Reuters

Lisa's journalism career spans two decades, and she currently serves as the Americas Day Editor for the Global News Desk. She played a pivotal role in tracking the COVID pandemic and leading initiatives in speed, headline writing and multimedia. She has worked closely with the finance and company news teams on major stories, such as the departures of Twitter CEO Jack Dorsey and Amazon’s Jeff Bezos and significant developments at Apple, Alphabet, Facebook and Tesla. Her dedication and hard work have been recognized with the 2010 Desk Editor of the Year award and a Journalist of the Year nomination in 2020. Lisa is passionate about visual and long-form storytelling. She holds a degree in both psychology and journalism from Penn State University.

A lawyer for music mogul Sean "Diddy" Combs said Tuesday the rapper was being targeted by a "witch hunt" after civil lawsuits accused him of sexual misconduct and federal authorities raided two of his properties.

Indonesia's losing candidate urges court to disqualify president-elect

Indonesia's losing presidential candidate Anies Baswedan laid out his challenge in court to last month's election on Wednesday, alleging interference by the state and urging a re-run and disqualification of winner Prabowo Subianto.

She’s the first American woman to sail around world solo in race — and she’s from Maine

A s the sun rose, only one mile separated Cole Brauer from the coast of A Coruña in Spain, where a crowd of supporters eagerly awaited her arrival after 130 days alone at sea. The 40-foot yacht First Light sliced through the waves, its blue and red sails emblazoned with “USA 54″ billowing against the wind. Victory in sight, Brauer stood at the bow and spread her arms wide, a safety flare sparkling in each hand. As she neared the finish line, the 29-year-old sailor hollered and cheered, flashing a wide smile.

At 8:23 a.m. on March 7, Brauer made history. Four months after setting sail from A Coruña for the Global Solo Challenge , Brauer became the first American woman to race around the world without stopping or assistance. The youngest skipper and the only female competitor, Brauer finished second out of 16 racers.

Advertisement

“I’m so stoked,” Brauer, of Boothbay Harbor , Maine, said in a livestream as she approached the end . She wore a headlamp over her beanie with the words “wild feminist” across the top, and a couple of boats trailed her. “I can’t believe it. I still feel like I’ve got another couple months left of this craziness. It’s a really weird feeling.”

She circumnavigated the globe by way of the three great capes — Good Hope, Leeuwin, and Horn — headlands that extend out into the open sea from South Africa, Australia, and Chile, respectively, and are notorious for presenting a challenge to sailors. Throughout, Brauer documented the arduous 30,000-mile journey in full on her Instagram feed. She amassed hundreds of thousands of followers, introducing many of them to the sport and upending stereotypes of a professional sailor.

Brauer, who is 5 feet 2 inches tall and weighs just 100 pounds, has long defied expectations and overcome skepticism in reaching the pinnacle of the yachting world.

“I’ve always been not the correct mold. I had a guy who used to always tell me, ‘You’re always on trial because the second you walk in the door, you have three strikes against you. You’re young, you’re a woman, and you’re small,’” she recalled in a recent interview. “Now with my platform, I don’t have to be as careful about what I say or do because people care about me because of me — not because I’m a sailor.”

In her videos documenting her long days at sea, she was often vulnerable, crying into the camera when First Light had autopilot issues and sea conditions caused the boat to broach , throwing her hard against the wall and bruising her ribs. She was giddy, showing off her new pajamas on Christmas Eve and dancing in a pink dress on New Year’s Day . As her popularity soared, she was a guide for the uninitiated, providing a breakdown of her sailing routes , her workouts and meals, and how she replaces equipment alone .

A native of Long Island, N.Y., she spent her childhood on the water, kayaking with her sister across the bay to school and finding comfort in the roll of the tide. She went to the University of Hawaii at Manoa , where, longing to be back on the ocean, she joined the sailing team. Brauer learned quickly, becoming a standout and winning the school’s most prestigious athletics award.

View this post on Instagram A post shared by COLE BRAUER OCEAN RACING (@colebraueroceanracing)

After college, she moved to the East Coast, hoping to start a career in sailing. But she found it difficult to break into the male-dominated industry.

“It was very difficult. I got a lot of ‘nos’. A lot of, ‘No way, we want nothing to do with you. You’re a liability,’” Brauer recalled.

Undeterred, she took whatever job she could, often for little pay.

Brauer found her footing in Boothbay Harbor , where her parents, Kim and David, were living. She coached the junior sailing team at the yacht club and met yacht captain Tim Fetsch, who became her mentor. While talking with Fetsch one night over dinner, Brauer shared her goal of competing in the prestigious Ocean Race , known as “sailing’s greatest round-the-world challenge.”

He sent her “ Taking on the World ,” Ellen MacArthur’s book on finishing the Vendée Globe, a solo round-the-world race, at 24. She cried while reading it.

“They allowed me to flourish in Maine,” she said.

With Fetsch, she delivered boats to Mystic, Conn., and Newport, R.I., a sailing capital where Fetsch introduced her to his connections and she “was accepted pretty early on as as a worker bee.”

Her big break arrived when she became the boat captain for Michael Hennessy’s Class40 Dragon . She spent several years captaining Dragon and delivering it to races along the East Coast and the Caribbean.

In 2022, she was invited to try out for the Ocean Race. But after the two-week trials in France , where she sailed with a fully crewed team, she was dismissed. They told her she was too small.

“They didn’t want the 100-pound girl unless you were, you know, one of those big guys’ girlfriends, and I was not going to be that,” she said.

Describing the story to a couple of friends after the trials, Brauer made a vow — “I guess I just gotta go around the world alone.”

“It’s almost good that it happened because I needed that to push me over the edge,” she said. “I needed them to make me feel so little that I would do anything to be big.”

Later that year, Dragon was sold to a pair of brothers, who renamed it First Light and said Brauer could keep sailing it for the season. In June, Brauer and her co-skipper, Cat Chimney, became the first women to win the 24th Bermuda One-Two Yacht Race . After the victory, Brauer was prepared to take a break from competition and enjoy a “gorgeous Newport summer.”

Her sponsors had other plans. “You need to take the momentum with this win,” Brauer recalled the brothers saying. “This is probably your one and only chance to really show the world, and we’re willing to help.”

She set her sights on the Global Solo Challenge . First Light underwent a refit. With little time to prepare, Brauer suffered panic attacks and became worryingly thin. But the sailing community rallied around her and she assembled her team.

“Newport said, ‘You are our child, and we’re going to take care of you,’” she recalled.

Brauer took off from Spain on Oct. 29, and her online profile began to rise as she chronicled the voyage. The sudden isolation was overwhelming at the start, bringing her to tears at least once a day.

At one point in the race, while bobbing along in the Southern Ocean, things looked bleak. She was in excruciating pain after being slammed into the side of the boat and could hardly move. First Light was having issues with its autopilot system and she kept having to replace deteriorating parts.

“It took the entire team and my own mental state and my mother and my whole family to kind of be like, ‘You’re tough enough, like you can do this. You can get yourself out of this,’” she said.

In a race where more than half the competitors pulled out, their boats unable to withstand the harsh conditions, Brauer often listened to music on headphones to lower her anxiety.

“This is your everything. You don’t want to lose it,” she said. “Mentally, no one in the entire world knows what you’re feeling. They can’t understand the weather or the wind patterns.”

Her team monitored her by cameras, and she spoke each day to those close to her, including her mom, whom she FaceTimed every morning (she used Starlink for internet access). Sometimes they would just sit in silence. Brauer found comfort interacting with her Instagram followers, who peppered her with questions about sailing terminology and sent her messages of affirmation.

She made a ritual of watching the sunset and sunrise, each different than the last.

“Those were the most magical moments,” she said. “No obstructions, no buildings, no cars to ruin the sound.”

As she approached the finish, she described how surreal it felt that the journey was about to be over.

“It’s such a weird feeling seeing everyone. I’m trying to learn how to interact again with people, so we’ll see how this goes,” Brauer said with a slight smile and laugh on her livestream. “I don’t really know how to feel. I don’t really know how to act. I don’t really know how to be.”

Shannon Larson can be reached at [email protected] . Follow her @shannonlarson98 .

• Share full article

How Do You Paddle a Disappearing River?

Canoeing the Rio Grande near Big Bend National Park can be magical. But as the river dries, it’s getting harder to find where a boat will actually float.

The Rio Grande trickling through the Santa Elena Canyon in Big Bend National Park in March. Credit... Ivan Pierre Aguirre for The New York Times

Supported by

By Daniel Modlin

Daniel Modlin is a reporter who has covered Far West Texas extensively.

• March 22, 2024

I had barely unbuckled my seatbelt and was already wondering if I had driven six hours across Texas for nothing. A once-in-a-lifetime river adventure had seemingly evaporated with some disappointing news.

It was the promise of a four-day, 33-mile canoe journey in Big Bend National Park, snaking through awe-inspiring canyons on a mighty river, that had lured me across the state. My partner’s brother, Michael Stangl, an occasional guide with Hidden Dagger Adventures , had offered to take me on the Rio Grande, one of the country’s longest rivers, which stretches from central Colorado to the Gulf of Mexico. I had only previously visited Big Bend on foot, and I was excited to see it from the water.

The moment I pulled into Michael’s driveway in Alpine, Texas, after driving there from Austin last April, he told me: We wouldn’t be going through the park anymore.

“Unless you want to go hiking with a canoe, we should run a different part of the river,” he said. Having just returned from that segment of the river — between Rio Grande Village, a small campground within Big Bend, and Heath Canyon Ranch, just outside the park — he said it had been “more work than fun,” and that he had been dragging the canoe for a quarter of a mile at a time over nearly dry riverbeds.

Instead, we would be doing the Temple Canyon route: an 11-mile, two-night, three-day stretch of the Rio Grande following the United States-Mexico border, more than 30 miles from where our original trip was supposed to begin. This different river segment, entirely outside and downstream from Big Bend, was instead within a desert bighorn sheep restoration area known as Black Gap.

Even though I was disappointed, I came to learn that last-minute changes to adventures involving the Rio Grande were common.

“If the river were a heart, it would be flatlining”

The Rio Grande is in peril: Its water is being depleted by farmers and cities , while a climate-change-induced megadrought that has desiccated the American Southwest for more than two decades is threatening hopes of its recovery. In 2022, the river ran dry in Albuquerque for the first time in four decades. In the same year, the picturesque Santa Elena Canyon, one of the most popular sights in Big Bend, also ran dry for the first time in at least 15 years, according to the National Oceanic and Atmospheric Administration.

“If the river were a heart, it would be flatlining,” said Samuel Sandoval-Solis, an associate professor at the University of California, Davis, studying water management.

For the West Texan river guides, it’s simply another precarious reality of life in the Chihuahuan Desert. “In my lifetime, I expect river trips to no longer be feasible,” said Charlie Angell of Angell Expeditions , a tour guide service based in Redford, Texas.

For now, those booking paddling tours on the Rio Grande can expect last-minute switch-ups if they want their boats to actually float.

“When guests book over the phone, we tell them, ‘You’re gonna go where we tell you we’re going,’” said Mike Naccarato, the founder of Far West Texas Outfitters , an adventure company based in Presidio, Texas. “And if they still insist on wanting to go to Big Bend National Park when the levels are low, we tell them it’s their choice: We can either do it by dragging the boat up and down the river, or we can go do this very, very pretty trip outside of the park, but still on the Rio Grande, instead.”

While the high season for river trips is typically March through May, and following monsoon season from September through November, local tour operators are struggling to predict when the water levels will be high enough.

“It’s really hard to say anything is normal nowadays — we’ve started calling it ‘non-soon’ season,” said Mr. Naccarato.

Dragging, zigzagging and head-butting

After an hourlong drive with canoes strapped to Michael’s truck, we stood on the edge of the river outside Heath Canyon Ranch, staring at an out-of-commission bridge stretching across the border to Mexico. While the sun was hidden behind clouds, I was already drenched in sweat from lugging the gear-filled canoes to the bank.

It was soon clear our “easier,” 11-mile journey would still be hard work because of the river’s lower-than-normal water levels.

Within about 30 seconds of pushing off, Michael and I reached our first rapid section and I, a river novice, was ill prepared. The lower water levels had left protruding rocks that we would have to navigate. Michael hopped out of his canoe and grabbed my bow. “You’re going to have to angle the nose directly toward that Y, where the river’s splitting and it’s turning white, then tilt the nose quickly right, then quickly left,” he instructed.

My canoe ended up jammed on a gravel bed, and I was forced to hump it over rocks until the river deepened. It happened again and again: At nearly every rapid section — and it felt as if one came around every time I started to gain confidence — my boat ended up beached. I must have spent more time out of my boat pushing it than in it paddling.

Even in sections where the river deepened, it wasn’t easy. Instead of the current pulling us swiftly down the middle, the lower water levels forced our boats to drift in a serpentine formation, back and forth across the banks of the river. The banks provided another problem: For most of our trip, the right bank of the river — the Mexican side — was dominated by carrizo cane. Also known as border bamboo or giant reed, the cane, an invasive species, stretched off the bank for what I estimated as up to 15 feet high.

The turbulent and narrow river dragged my boat right into the cane, which cut up my arms and legs, and clotheslined me into the water. Michael instructed me to — counterintuitively — lean forward into the cane, not away from it. When I heeded his advice, my (unhelmeted) head became a blunt object upon which the cane snapped itself in half. It was significantly better than capsizing.

That night, blistered, bruised and damp, I asked Michael as we sat on our sleeping pads if floating the Rio was always this strenuous and riddled with obstacles. “Not when there’s really water,” he said. In fact, as I later learned, most of the difficulties I encountered (beyond stepping in cow dung near the campsite), could be attributed to the river’s lower water levels and signs of the landscape shifting as a result, said Jeff Bennett, a hydrologist for the Rio Grande Joint Venture , a conservation group that strives to protect the river habitat.

“Boulders, gravel, sand and this invasive cane are no longer getting washed downstream,” Mr. Bennett said in a phone interview. “A flood would remedy all of that.”

A journey worth the bruises

On the last morning of the trip, we salvaged a few soggy sandwiches from the bottom of our coolers and shoved off. The river was calm for the few miles we had left, and we saw turtles called Big Bend sliders sunbathing on the rocks.

The last challenge the river dealt us was leaving it. We floated right past the takeout point, which was shrouded in cane, and we had to paddle back upstream for a quarter of a mile.

Unlike the previous spots on the river where we had pulled our canoes ashore, this one was surprisingly deep, with the river rising to my chest. Instead of a gentle slope, like the places where we had made camp along our journey, the takeout was, more or less, a 60-degree sand dune stretching for 20 yards.

After lugging my boat through the sand, I collapsed, wet, bruised and spent, with only enough energy to dissociate into the cloudless sky.

“We think the river has changed, but really, we have changed the river,” Dr. Sandoval-Solis, the U.C. Davis associate professor, told me months later, when I was back home among my creature comforts, adding that he believed it was still possible to return the river to its once powerful state through proper water management practices. “The river has a much better memory than we do.”

He is correct about its memory: When the rains come, the river remembers its identity as an eons-old canyon carver, even if we know it only as a gasping, dwindling giant.

He is correct about our flawed memory, too. Because when I think of my trip, the cane thwacking me, stepping in cow dung or the change of plans isn’t what I recall first. Instead, I think of lying out under a blanket of stars, passing a bottle of mezcal back and forth in between hands of cards, listening to the brays of burros echoing from cliff to cliff, canyon to canyon, bank to bank. And I want to do it — all of it — again. I just hope there’s enough river for next time.

Follow New York Times Travel on Instagram and sign up for our weekly Travel Dispatch newsletter to get expert tips on traveling smarter and inspiration for your next vacation. Dreaming up a future getaway or just armchair traveling? Check out our 52 Places to Go in 2024 .

Advertisement

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Pay My Bill
• Customer Service

• Free Newsletter
• Give a Gift

Ericson 34-2 Finds Sweet Spot

How to Sell Your Boat

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Leaping Into Lithium

The Importance of Sea State in Weather Planning

Do-it-yourself Electrical System Survey and Inspection

Install a Standalone Sounder Without Drilling

When Should We Retire Dyneema Stays and Running Rigging?

Rethinking MOB Prevention

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

Check Your Shorepower System for Hidden Dangers

DIY survey of boat solar and wind turbine systems

What’s Involved in Setting Up a Lithium Battery System?

The Scraper-only Approach to Bottom Paint Removal

Can You Recoat Dyneema?

Gonytia Hot Knife Proves its Mettle

How to Handle the Head

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Re-sealing the Seams on Waterproof Fabrics

Safer Sailing: Add Leg Loops to Your Harness

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Sailboat Reviews

This unusual, flush-deck 1970s-era boat draws a bit too much to be a true trailer-sailer, but her performance nearly rivals a J/24. The cockpit is big, but the cabin quite small.

We originally reviewed the Tanzer 22 in the December 1, 1981 issue, but a friend of ours did such a good job restoring the 25-year-old T-22 he inherited from his father that we decided to take a second look. The T-22’s accommodations haven’t gotten any more workable than they were when we first sailed her; her aesthetics are, at best, “unique,” and we doubt she’d have much luck in a drag race with lighter 22’s like those that have come on the market since she was introduced in 1970. Still, she’s simple and fun to sail. She’s also capable enough as a cruiser and challenging enough as a racer to make her one of the most popular boats of her type ever built. There were 2,270 sold.

The Tanzer 22’s shortcomings may illustrate some of the ways that sailboats have gotten better over the years, but her strengths are still genuine. A pint-sized weekender/racer that wears well, the T-22 has earned remarkable loyalty from her owners.

Johann “Hans” Tanzer, designer/builder of the T-22, grew up in Austria where he apprenticed as a boatbuilder. Then he went to Switzerland where he built and raced dinghies and small boats. Finally he emigrated to Canada. He worked at first on one-offs, dinghies, and raceboats before starting his own shop. Tanzercraft built Lightnings, International 14s, and Y-Flyers. “Right from when I started in Austria the main thing was always racing…to make a boat go fast,” Tanzer said from his home near Dorion, Quebec. “Then I thought, ‘What about a boat for the family, for the average guy?’”

His answer was a 16-foot daysailer he called the Constellation, his first design. When his company expanded and became Tanzer Industries, Inc. in 1968, the Constellation became the Tanzer 16, and then Hans Tanzer drew up an overnighter version, the next step in appealing to the average guy.

Next up was the Tanzer 22.

“I was inspired a bit by Uffa Fox, some by George Hinterhoeller and what was happening at C&C; I knew how to make boats go fast. But for the 22 I wanted a boat that was first of all safe, that would be forgiving, that you would not need to be expert to sail, that would let families sail together.”

Design The T-22’s cockpit is large. It is well over 7′ long and (in the absence of side decks) utilizes the whole of the boat’s beam. It provides room to seat six and lets four sail comfortably. The well is deep, the seat backs are high, the seats slope outboard; it is secure and comfortable.

“We’ve sailed the boat for more than 20 years,” said an owner from Maine. “We like the roomy cockpit and solid feel. It’s a great boat for children as the cockpit is so deep and spacious.” Most owners say the same; its over-sized cockpit is a key to the appeal of the boat.

It is also, however, too big to drain quickly. And there is no bridgedeck. We asked Tanzer about the potential danger of filling the cockpit offshore and/or in heavy weather.

“The corner of the house deflects water and protects the cockpit from taking solid waves,” he answered. “My son and I took out the first boat we built and tried to break it. We had the spreaders in the water and the waves still didn’t come aboard. The water just streamed aft along the deck. The hull has plenty of freeboard and the cockpit sides are high. I think I should have made the cockpit more self-bailing, though.”

John Charters, once service manager at Tanzer Industries and now editor of the class newsletter, said, “Many owners have, like I did, added drains in the forward corner outboard end of the cockpit benches to drain what water comes aboard to the scuppers. I’ve seen T-22s with their keels out of the water, but I’ve never seen them swamp or heard of one that sank. When it starts to blow hard, though, I always sail with the bottom drop board in place in the companionway to make sure no water gets below.”

The T-22 displaces 2,900 pounds (3,100 for the keel/centerboard version). That’s heavy, even by 1970’s standards. The Catalina 22, a contemporary of the T-22, weighs 2,150 pounds. The more modern J/22 is just 1,790 pounds (and she’s hardly the lightest racer/cruiser available in this size range.) It’s natural to think of displacement as “dead weight,” especially in a small boat where size puts an effective limit on sail area. However, it can also translate (as we feel it does with the T-22) into robust scan’tlings and healthy ballast/displacement ratios. “Everything on the Tanzer is built extremely heavy-duty,” said one owner.

Tanzer put much of the T-22’s buoyancy in the after sections. As a result, she accommodates the weight of a cockpit full of sailors without squatting or deforming her sailing lines. Finally, the T-22 provides little of the “corky” feel that some small boats do. It would undoubtedly be possible to build the boat lighter today. That might improve it some, but the T-22’s solid feel and generous payload have endeared her to “the average guy,” and much of that is due to her heavy displacement.

The mainsail is small (112 sq. ft.) with almost no roach. Her spar is a “tree” in section and virtually unbendable. A 200 sq. ft. (170%) genoa provides the real muscle of the sail plan. We prefer a big controllable mainsail married to a small, non-overlapping jib for versatile, efficient sailpower. In a bigger boat an out-sized genny can become a man-killer. However, the Tanzer’s sails are small enough to handle. Putting most of the horsepower in the foretriangle is one way to limit weather helm and boost square footage for light air performance. A 375 sq. ft. spinnaker is allowed by the class. The T-22 sailplan, though dated, is proven and straightforward.

The hull and foil shapes also are products of their time. Not nearly so sharp of entry nor flat of exit as a modern racer/cruiser, hers is a “through-the-water” hull.

Like many racers from the early 70s, especially those produced by neighboring C&C, the T-22 has a swept-back keel. Designers have since plumbed the underwater mysteries with deltas, trapezoids, ellipses, bulbs, and wings. You don’t see swept-back fins much anymore, but they provide a generous and wide “groove” (which suits the boat well for the average sailor) and minimize wave-making resistance (which helps the boat accelerate and adds to her lively feel). Other shapes have come into fashion, but the T-22’s fin works well.

The same is not entirely true of the T-22 rudder. Tanzer’s original design was a shallow, aft-raking, semi-scimitar. He wanted, he said, a lift/drag profile to match the keel’s and a “fail-safe” element to keep sailors from “driving the boat into trouble.” What he got was a foil that tended to lift clear of the water and ventilate when the boat heeled in a puff.

“We should have replaced it right away,” said Charters, “but it took a long time before we developed a new one. It was deeper, semi-balanced, and straight on the leading edge. It worked! What used to involve fighting ‘on-the-edge’ weather helm is now a two-finger operation. We let the new rudder (it was developed by one of our owners and costs only about $200) and old rudder race together in our regattas.”

There aren’t many boats that look like the T-22. Her straight housetop/deck extends from stem to cockpit. The bow is spoon-curved but a bit bulbous. Very modern-looking in profile, the sheer is traditionally sprung, traced by a cove-stripe/rubbing strake that runs along the deckless “deckline,” which creates the illusion of low to medium freeboard while the actual hull/house sides are quite high. Except for the visual trickery involved with this cove stripe, Tanzer didn’t invest much in trying to make his boat look like something it wasn’t. Her big cockpit, raised side decks, and “good-for-the-average-guy” hull were the main thing, and that is what you get. From some angles she looks saucy, from some others silly.

Accommodations Dinettes were very popular in the ‘70s. “Convertible space” was the magic key to making little boats accommodate big people. Obviously, you have to bend some to cruise a boat this small.

The T-22’s headroom (4′ maximum) makes that point emphatic. So do the sharply tapered V-berth and the narrow quarter berth. The physical and visual “elbow room” created by taking the house side out to the rail, however, helps make the cabin less cramped. Still, the need to convert is a haunting reality. Change the table into the double berth, lift the forward berth to access the head beneath, convert the front-opening ice box into something you can live with underway, the hatch cover into a pop top, etc. and, after a while, “two-way space” becomes a mixed blessing.

Ventilation is another sore spot, but stowage (except for the “silly waste of space given over to the sink and ice box” noted by an owner from Lake George, New York) rates as “good” to “very good” with most owners. Hardly the heart of the design, the T-22’s interior has still let thousands enjoy the sort of limited cruising she was meant for.

Construction Eric Spencer, Tanzer Industries president from 1968 until 1985, now runs Yachting Services, Ltd. (Box 1045, Pointe Claire, Quebec H9S 4H9, Canada; 514/697-6952) that, among other activities, sells parts for the more than 8,000 Tanzers out there.

“Hans was always on the shop floor,” Eric said, “rarely in the office. He was prone to over-engineering things. You can see it in the T-22 keelbolts. They’re the same size we later used on the T-31. And we used the same mast section in the 26 with no problems. And the rigging—everyone else was using 1/8″ wire; Hans had to have 5/32″”

The hull/deck joint is an outboard flange joined by semi-rigid adhesive and 3/16″ machine screws on 6″ centers. Charters, the ex-service manager, said, “Though many owners report no leaks, the joint can leak—sometimes. One of the simpler systems and certainly one of the easiest to fix, it has some minor faults. Impact to the hull, even squeezing between lifting slings, can break the adhesive bond. Both the machine screws and the Monel pop rivets used on some boats may loosen where fasteners pulverize the fiberglass. Remember that the T-22 sails with her rubrail in the water. That pressure can turn even a tiny gap into a leak.”

Charters recommends removing the rubrail, (“but leave it attached at stem and stern or you’ll never get it back on,”) replacing (with oversized machine screws or through bolts) loose fasteners, and redoing the seal using BoatLIFE Life-Caulk or 3M 5200. This “two- to three-hour process,” he said, will renew most boats’ hull/deck joint to tightness.

The portlights originally relied on a sponge rubber inner gasket and a hard rubber outer seal. These, too, most likely will need to be renewed on older boats. Replacing the inner seal with butyl tape is one suggestion. Cutting new, over-sized ports from an acrylic or polycarbonate material (the original plastic clouds with age) and fastening them to the house side with sealant and mechanical fasteners is another good fix, owners report. “The sponge and spline seals I purchased (about $100) for the hull ports from Eric Spencer made re-doing the cabin ports easy. It took four hours and the leaks are completely gone!” said the owner of a 1981 model in Ontario.

An interior hull liner incorporates the berths, cabinets, sole, etc. It’s easy to assemble, and strong if done meticulously (as it seems to have been on the Tanzer floor). But when this construction system includes molded headliners it is hard to move or add deck hardware.

Resin-rich fiberglass from the era when the boat was first built is prone to becoming granular and powdery around screw holes. The early gelcoats craze easily. Still, most owners seem happy.

“Finish has held up very well over the years,” and “Boat looks like new,” were comments frequently heard about the T-22.

Our friend’s 25-year-old heirloom, however, had passed that stage. To bring the hull back he washed it down with Interlux 202, patched dings and scratches with epoxy and microballoons, then brushed on two coats of marine gloss enamel. The result rivals a professionally sprayed job while the cost (time, labor, and materials) is in keeping with the value of a quarter-century-old 22-footer.

The T-22’s iron keel is a sore point. Iron is 40% less dense than lead so you need more of it (at a cost in added wetted surface) to give the boat sufficient ballast. And it rusts. One owner said he discovered no primer beneath the bottom paint applied at the factory. Many sailors know the agonies of fairing a keel that scales and peels. For race-ready perfection you can fill the major craters with epoxy and then build and sand with a system like Interlux’s Interprotect (2000 E coating and V135 Watertite fairing). Not many owners are that far into their fleet racing, but most wish that the keel originally had been made of lead.

Performance Hans Tanzer’s solid background in performance boats, dinghies, and daysailers helped him design the sort of “safe and forgiving” yet lively sailboat he was looking for to appeal to the average guy. He struck a number of balances well. The big cockpit (little cabin), good stability (stiff but not rock-like), controllable rig, and powerful yet easily driven hull combine to give her good manners.

We sailed our friend’s newly painted boat through a drifty morning and a sea-breeze afternoon. In the river she was quick, but tacking the genoa made us wish for a smaller jib and bigger mainsail. On the ocean she was solid and dry. She tacked in 75° in smooth water, and short-tacked up a channel, quickly getting her foils working after a tack.

With a 15-knot breeze she surged rather than surfed. Her deep, rounded afterquarters make her easy to steer but reluctant to get up on plane where a J/22 might.

The strongest T-22 fleets are in Montreal and Ottowa, but American fleets are active, too. Said Charters, “We were the first cruiser/racer invited to CORK (Canadian Olympic-training Regatta at Kingston). We’ve moved now to the offshore course and start 5 minutes behind the J/24s. Usually, the first T-22s, light air or heavy, catch the straggling 24s. We’ve never beaten the winners though.”

PHRF ratings for the T-22 range between 92 and 98, while the J/24 rates between 88 and 98.

The standard mainsheet is attached to a strongpoint on the cockpit sole. A number of traveler options have been tried. Tracks mounted on the sole rather than on a cross-cockpit bridge cut up the cockpit less but offer less control.

You might point higher if you could sheet the genoa tighter, but the shrouds don’t let you. Also, those shrouds, not in perfect alignment with the tabernacle hinge at the base of the mast, must be loosened before you lower the mast. Depending on how (and how much) the wind is blowing, that can be a problem.

The keel/centerboard version (about 10% of the boats sold have this configuration) is less close-winded and, according to racers, not that much faster off the wind than the full keel. Either needs at least 5′ of depth to float off a trailer, so being ramp-launchable involves sending the trailer into the water on a tether.

Conclusions One of the biggest pluses for the boat is the 700-member owner’s association. It maintains Tanzer Talk (a newsletter) and egroups.com/tanzer (a website) that make fellowship as big a part of ownership as you’d like it to be. The owner of a 1979 model from Long Island Sound reports “an outstanding T-22 website (http//www.tanzer22.com) and network of owners who are always willing to help with ideas and experience.”

Built efficiently but using high quality materials throughout the boat (even the pop rivets are Monel), the T-22 commanded a higher price than many of her competitors.

A prospective buyer can still find cheaper ways into the pocket cruising experience, but not many offer the combination of big boat feel and reliability, plus raceboat life, that have suited the T-22 so well to Tanzer’s “average guy.”

RELATED ARTICLES MORE FROM AUTHOR

Thank You! Good article. Just purchased a Tanzer 22. Needing to get proficient at raising and lowering the mast. I received a few Tanzer.22 Newsletters with the boat. In Volume 2 Numbers 21 to 42 page 82 has a good article about ” Mast raising or lowering”. Its quite descriptive but a little confusion. It was written by Brian Rees from CA, I would love to talk with him and have him explain the details. If you know the article, review it and feel free to comment. hank you

Excellent article and review, thank you!

LEAVE A REPLY Cancel reply

Log in to leave a comment

Latest Videos

40-Footer Boat Tours – With Some Big Surprises! | Boat Tour

Electrical Do’s and Don’ts

Bahamas Travel Advisory: Cause for Concern?

Island Packet 370: What You Should Know | Boat Review

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

Six people presumed dead after Baltimore Key Bridge collapses, Coast Guard says

A major bridge in Baltimore collapsed after being hit by a freighter about 1:30 a.m. Tuesday, sending at least eight people from a construction crew into the water as a large section of the bridge crashed into the Patapsco River. Six people were presumed dead Tuesday evening, authorities announced as they shifted from a search and rescue operation to a recovery effort. The container ship lost power moments before it struck the Francis Scott Key Bridge, Maryland Gov. Wes Moore (D) said at a news conference.

• Ship’s pilot tried to slow the vessel as it veered toward bridge, trade association says
• Rescue operation ends with six presumed dead
• Baltimore community gathers for vigil honoring bridge collapse victims

Here's what to know:

Here's what to know, live coverage contributors 50.

7 min ago 7 min ago

1 hour ago 1 hour ago

2 hours ago 2 hours ago

9:03 p.m. EDT Reporting from Baltimore 9:03 p.m. EDT

9:00 p.m. EDT Bullet Key update 9:00 p.m. EDT

8:25 p.m. EDT Bullet Key update 8:25 p.m. EDT

8:01 p.m. EDT Bullet Key update 8:01 p.m. EDT

7:49 p.m. EDT 7:49 p.m. EDT

7:31 p.m. EDT 7:31 p.m. EDT

6:56 p.m. EDT 6:56 p.m. EDT

6:45 p.m. EDT 6:45 p.m. EDT

6:16 p.m. EDT 6:16 p.m. EDT

6:14 p.m. EDT 6:14 p.m. EDT

6:00 p.m. EDT 6:00 p.m. EDT

5:58 p.m. EDT 5:58 p.m. EDT

5:16 p.m. EDT 5:16 p.m. EDT

5:06 p.m. EDT 5:06 p.m. EDT

4:58 p.m. EDT Bullet Key update 4:58 p.m. EDT

4:31 p.m. EDT 4:31 p.m. EDT

4:29 p.m. EDT 4:29 p.m. EDT

4:24 p.m. EDT 4:24 p.m. EDT

4:21 p.m. EDT 4:21 p.m. EDT

4:17 p.m. EDT 4:17 p.m. EDT

4:16 p.m. EDT 4:16 p.m. EDT

4:11 p.m. EDT 4:11 p.m. EDT

4:09 p.m. EDT 4:09 p.m. EDT

3:35 p.m. EDT 3:35 p.m. EDT

3:34 p.m. EDT 3:34 p.m. EDT

3:12 p.m. EDT 3:12 p.m. EDT

3:10 p.m. EDT 3:10 p.m. EDT

3:09 p.m. EDT 3:09 p.m. EDT

2:58 p.m. EDT 2:58 p.m. EDT

2:56 p.m. EDT 2:56 p.m. EDT

2:22 p.m. EDT 2:22 p.m. EDT

2:19 p.m. EDT 2:19 p.m. EDT

2:11 p.m. EDT 2:11 p.m. EDT

1:31 p.m. EDT 1:31 p.m. EDT

1:23 p.m. EDT 1:23 p.m. EDT

1:14 p.m. EDT 1:14 p.m. EDT

12:47 p.m. EDT 12:47 p.m. EDT

12:38 p.m. EDT 12:38 p.m. EDT

12:27 p.m. EDT 12:27 p.m. EDT

11:58 a.m. EDT 11:58 a.m. EDT

11:56 a.m. EDT 11:56 a.m. EDT

11:55 a.m. EDT 11:55 a.m. EDT

11:49 a.m. EDT 11:49 a.m. EDT

11:45 a.m. EDT 11:45 a.m. EDT

11:36 a.m. EDT 11:36 a.m. EDT

11:32 a.m. EDT 11:32 a.m. EDT

11:17 a.m. EDT 11:17 a.m. EDT

11:15 a.m. EDT 11:15 a.m. EDT

11:02 a.m. EDT 11:02 a.m. EDT

10:58 a.m. EDT 10:58 a.m. EDT

10:53 a.m. EDT 10:53 a.m. EDT

10:47 a.m. EDT Bullet Key update 10:47 a.m. EDT

10:35 a.m. EDT 10:35 a.m. EDT

10:34 a.m. EDT 10:34 a.m. EDT

10:24 a.m. EDT 10:24 a.m. EDT

10:19 a.m. EDT Bullet Key update 10:19 a.m. EDT

10:14 a.m. EDT 10:14 a.m. EDT

10:10 a.m. EDT 10:10 a.m. EDT

10:05 a.m. EDT 10:05 a.m. EDT

10:02 a.m. EDT 10:02 a.m. EDT

9:44 a.m. EDT 9:44 a.m. EDT

9:32 a.m. EDT 9:32 a.m. EDT

9:30 a.m. EDT Bullet Key update 9:30 a.m. EDT

9:22 a.m. EDT 9:22 a.m. EDT

9:18 a.m. EDT 9:18 a.m. EDT

9:17 a.m. EDT 9:17 a.m. EDT

9:09 a.m. EDT Bullet Key update 9:09 a.m. EDT

9:00 a.m. EDT 9:00 a.m. EDT

8:51 a.m. EDT 8:51 a.m. EDT

8:35 a.m. EDT Bullet Key update 8:35 a.m. EDT

8:29 a.m. EDT Bullet Key update 8:29 a.m. EDT

8:19 a.m. EDT 8:19 a.m. EDT

8:15 a.m. EDT 8:15 a.m. EDT

7:59 a.m. EDT 7:59 a.m. EDT

7:46 a.m. EDT Bullet Key update 7:46 a.m. EDT

7:21 a.m. EDT 7:21 a.m. EDT

7:18 a.m. EDT 7:18 a.m. EDT

6:52 a.m. EDT 6:52 a.m. EDT

6:49 a.m. EDT Bullet Key update 6:49 a.m. EDT

6:18 a.m. EDT 6:18 a.m. EDT

5:51 a.m. EDT Bullet Key update 5:51 a.m. EDT

5:31 a.m. EDT 5:31 a.m. EDT

5:27 a.m. EDT 5:27 a.m. EDT

5:19 a.m. EDT 5:19 a.m. EDT

5:13 a.m. EDT 5:13 a.m. EDT

5:00 a.m. EDT Reporting on the scene from Baltimore 5:00 a.m. EDT

4:41 a.m. EDT 4:41 a.m. EDT

4:40 a.m. EDT 4:40 a.m. EDT

4:24 a.m. EDT Bullet Key update 4:24 a.m. EDT

4:18 a.m. EDT Bullet Key update 4:18 a.m. EDT

4:12 a.m. EDT 4:12 a.m. EDT

Local News | Dali crew spent weekend in Baltimore before…

Share this:.

• Click to share on Facebook (Opens in new window)
• Click to share on Twitter (Opens in new window)

Baltimore Sun eNewspaper

• Anne Arundel County
• Baltimore City
• Baltimore County
• Carroll County
• Harford County
• Howard County
• Sun Investigates
• Environment

Breaking News

Local news | recovery efforts to resume wednesday for six key bridge construction workers believed to be dead, local news | dali crew spent weekend in baltimore before heading back to sea, but ship instead struck key bridge.

Andy Middleton heard “a sustained rumbling sound” but thought it was a low-flying plane. Only hours later Tuesday did the Dundalk resident learn it was the Key Bridge collapsing after being struck by the Dali cargo ship, whose crew members he and other volunteers had taken shopping while they were docked in Baltimore this weekend.

“I was able to reach out to the crew, and everyone was safe,” said a relieved Middleton, director of the Apostleship of the Sea. “I’m still concerned about those who were on the bridge when it collapsed and hope they’re found.”

The Catholic ministry helps crew members while their vessels are at the Port of Baltimore, respites for what can be monthslong trips at sea.

Middleton said he and other volunteers took Dali crew members to Walmart, where they wanted to stock up for a particularly long voyage ahead.

“They were going to Sri Lanka, and the captain said it was going to be a 28-day voyage ,” he said. “They were going down and around South Africa to avoid the Red Sea and the Houthis.”

In response to Israel’s bombing in Gaza, Houthi rebels in Yemen, who have been designated a terrorist group by the U.S., have been attacking ships in the Red Sea and military forces in the area.

As a result, the Dali was “taking a longer route,” Middleton said.

“We’re a friendly face when they come into the Port of Baltimore,” he said. “I’m glad we were able to provide services for them before they sailed.”

Crews that arrive here are also assisted by another group, the Baltimore International Seafarers’ Center.

Now, Middleton is gearing up for whatever the crew might need when they return to port.

“I’m sure there will be some who are shaken by it,” he said. “You never know how you’re going to react to something. No one ever thinks you’re going to set sail and hit a bridge and it’s going to collapse.”

More in Local News

Local News | ‘Find all the bodies’: Leaders pray for Baltimore Key Bridge collapse victims

Local News | Carnival cruise passengers to return to Norfolk instead of Baltimore after Key Bridge collapse

SUBSCRIBER ONLY

Aegis | state compliance board rules cassilly’s office violated public information act.

Indonesian crews rescue dozens of Rohingya refugees clinging to capsized boat

An Indonesian search and rescue ship has located a capsized wooden boat carrying dozens of Rohingya Muslim refugees, pulling survivors who had been standing on its hull to safety.

The Associated Press said 10 people had been taken aboard local fishing boats and another 59 were being saved by the Indonesian craft.

Men, women and children, weak and soaked from the night's rain, wept as the rescue operation got underway and people were taken aboard a rubber dinghy to the rescue boat.

There were contradictory reports about whether anyone had died in the accident, with survivors saying many who had been aboard when the boat departed from Bangladesh were still unaccounted-for, but authorities insisted everyone had been rescued.

"We have examined all 69 Rohingya that we rescued and from our examination, there was no information from them about any deaths," Fathur, a rescue officer who gave only one name, told reporters.

"We managed to evacuate all 69 people and no-one stated that anyone had died."

An Indonesian media outlet is reporting that the asylum seekers were planning to travel to Australia. 

Antara News cited a sub-district official in West Aceh, where the boat capsized, saying the group planned on heading to Australia but their boat sunk on the way.

With the addition of six Rohingya who were rescued by private fishing boats that were at the scene well before authorities launched the official rescue mission, a total of 75 people from the boat were saved.

A spokesperson from the Australian Border Force said the "suggestion made by media outlets that the venture was bound for Australia is false".

Samira, a 17-year-old who was among the refugees from the Kutupalong camp in Bangladesh who had been travelling to Malaysia, said there had been 146 people on board, raising the prospect that 71 could still be missing at sea.

She told the Associated Press the boat began foundering three days ago and then capsized on Wednesday, adding that her nephew was among those unaccounted-for.

"All of us are very sad," she said.

"We are very hungry and weak."

When fishing vessels reached the scene on Wednesday, desperate refugees clamoured aboard one of the boats, overloading it and causing it to also capsize.

It was not immediately clear what happened to the crew on board.

After being informed about the refugees in need of help by the fishermen on Wednesday morning, an official search and rescue team set off from Banda Aceh city that evening.

They didn't reach the area of the accident until early in the morning and could not initially locate the capsized boat.

When they came upon it midday Thursday, they found the refugees on its hull, desperate for help.

They rescued 42 men, 18 women and nine children and took some to a temporary shelter in the Aceh Besar district and others to a local hospital for treatment.

Amiruddin, a tribal fishing community leader in Aceh Barat district, said those rescued indicated that the boat was sailing east when it started leaking and then strong currents pushed it toward the west of Aceh.

About 740,000 Rohingya fled earlier to Bangladesh to escape a brutal counterinsurgency campaign by security forces in their homeland of Myanmar.

Thousands have been trying to flee overcrowded camps in Bangladesh to neighbouring countries, with Indonesia seeing a spike in refugee numbers since November which prompted it to call on the international community for help. Rohingya arriving in Aceh face some hostility from some fellow Muslims.

Indonesia, like Thailand and Malaysia, is not a signatory to the United Nations' 1951 Refugee Convention outlining their legal protections, and so is not obligated to accept them.

However, they have so far provided temporary shelter to refugees in distress.

Last year, nearly 4,500 Rohingya — two-thirds of them women and children — fled their homeland of Myanmar and the refugee camps in neighbouring Bangladesh by boat, the United Nations refugee agency reported.

Of those, 569 died or went missing while crossing the Bay of Bengal and Andaman Sea, the highest death toll since 2014.

Returning safely to Myanmar is virtually impossible because the military that attacked them overthrew Myanmar's democratically elected government in 2021.

No country has offered them any large-scale resettlement opportunities.

• X (formerly Twitter)
• Federal Government
• Maritime Accidents and Incidents

• Link copied! Clipboard

Boater identified in Sanibel Causeway crash

While DiMaria’s station didn’t answer Thursday’s call, he’s responded to boating accidents over the years.

• RELATED: Watch: The moments after a boat crashes along the Sanibel Causeway

The Lee County Sheriff’s Office , U.S. Coast Guard and Lee County EMS all came to the scene.