Introducing the Carbon Fiber T50 MOD.
With its lightweight carbon fiber hull and beautiful varnished deck, the Carbon Fiber T50 is the perfect fusion of modern sailing performance coupled with the classic and timeless appearance of wood.
The hull is gel coated black carbon fiber, and the deck is the same very light plywood single piece deck that is provided with the cedar strip version of the T50.
The carbon fiber T50MOD kit is very comprehensive. It includes the formed carbon fiber hull, precut wood deck, hardware, keel and keel bulb, epoxy, a 2.4 ghz digital radio, presewn 3/4 oz. nylon spinnaker-cloth sails, servos (including a powerful drum winch sail servo), carbon fiber booms and mast, and complete instructions filled with pictures to guide you through the building process.
The carbon fiber T50MOD is beautiful and fast, strong and light. It will give you and your family generations of sailing fun!
Kit $825.00
Substitute mylar sails (shown in the sailing pictures above) in place of the standard nylon spinnaker cloth sails for $965.00 as a kit.
T50 Lakeside/Floor Stand $51.
T50 Wall-Hanging Stand $38.
[ Home Page | Owners Pictures | Movie Page | More Fun Pictures | Excellent Sailing Performance | Radio Control T37 | T50 MOD | T50 Trimaran Radio Controlled Multihull | T65 Racing Sloop | Order Form ]
Building, restoration, and repair with epoxy
RC Model Sailboat Builds
By Mark Borg
I have been using WEST SYSTEM® Epoxy for over 20 years. Over that time my projects have included building carbon fiber bikes and an amphibious robot to test my autonomous navigation software for my PhD in Robotics. Most recently, however, I built RC scale models of the 1995 America’s Cup winner Black Magic and the Multi70 trimaran, Maserati.
Black Magic Build
In 1995 the New Zealand boat NZL 32 Black Magic won the America’s Cup with a game-changing design. The win turned yacht racing on its ear and cemented itself in my memory. 28 years later, I recreated Black Magic using foam, fiberglass , and WEST SYSTEM Epoxy .
I cut and shaped the hull from a block of pink insulation foam and covered it with 6 oz. fiberglass. Since this model was built in warm weather, I used WEST SYSTEM 105 Epoxy Resin® and 206 Slow Hardener® . I reinforced the bow and stern areas with Kevlar® and the same epoxy to withstand bumps with docks. The model is 48″ (122 cm) long and 96″ (244 cm) high.
To balance the sails, the model has a 10 lb (4.5 kg) poured lead keel. I made the keel by shaping a piece of foam, making a plaster-of-Paris mold, and then pouring the molten lead into it. This is akin to a lost wax mold. Two threaded rods were cast into the lead keel to connect the keel to the hull. Foam pieces were fitted around the threaded rods and shaped to a wing foil profile. Over the foam, I used carbon fiber fabric to support the weight of the keel while the boat is heeling. The carbon fiber was wet out in place with WEST SYSTEM Epoxy and then vacuum bagged to remove any air bubbles.
Maserati Build
My second boat is a scale reproduction of the Multi70 trimaran, Maserati. The model is 53″ (135 cm) long, 37″ (94 cm) wide, 96″ (244 cm) high, and only has 3 lbs (1.4 kg) of lead.
Similar to the monohull, the multihull is hand-shaped out of pink insulation. To match the shape of the original boat, I used photos to get the proportions and ratios correct. To shape the foam, I used a hot wire foam cutter, utility knife, automotive-style body file, and sandpaper in that order. Wire cutting gave the best finish with the least amount of mess. Unfortunately, almost every surface on the hulls involved a compound curve that required filing and sanding—the messiest ways to shape foam. Filing leaves a less-than-desirable finish since sometimes the file digs in unexpectedly and removes a chunk of foam.
In places where filling of the foam was needed, I used Bondo® Spot Putty or lightweight drywall compound. I used these fillers as opposed to thickened WEST SYSTEM Epoxy since the primary goal for the filler material was to be easier to sand than the base foam and strength was not a concern. This easy-to-sand filler minimized any distortion in the overall shape of the hulls from my sanding.
Once the correct shape was achieved, the hulls were covered with two layers of 4 oz. fiberglass. I used 4 oz. fiberglass and WEST SYSTEM Epoxy on the trimaran as opposed to the 6 oz.
The foam was covered with carbon fiber to form the cross beams.
fiberglass that I used on the monohull, due to the improved draping capabilities that I required on the sharper hull form of the multihull.
For the cross beams, I used four layers of unidirectional carbon fiber with WEST SYSTEM 105 Epoxy Resin and 205 Fast Hardener® . The top and bottom layers of carbon fiber run longitudinally, and the middle two layers run on opposite 45-degree angles. I used the 205 Fast Hardener because I was using a vacuum bag to consolidate the laminate and I wanted the layup to set quickly. This increased strength was required to provide the support needed for the model to “fly” on one hull.
The shaped foam was covered with two layers of 4 oz. fiberglass.
Additional Details
The sails for both boats are made from nylon spinnaker material (ripstop). The masts utilize ¾” (19 mm) diameter aluminum extrusion. The standing rigging is made from fly-fishing line, and fishing barrel swivel snaps are used to quickly attach all the rigging to the boat. To set the rig taunt, small, homemade guy line tensioners (like the ones used on a tent) allow for the rig to be tensioned. The logos were designed with CAD software and cut out of colored vinyl. The logos with multiple colors required perfect alignment so register marks were used.
The rudder and sails for Black Magic are RC servo-controlled. The trimaran still needs to be kitted out with remote control servos for the rudder and sail plan. In the future, I plan to add a manually retractable skeg and two manually adjustable, carbon fiber, “C” shaped hydrofoils.
You cart is empty, Go Shopping!
- Carbon Fiber Hulls
- Engine Accessories
- Exhaust System
- Onsale Products
Fresh Released Products
SRD-V2 Stingray Drive
Smart Box-S
Billet X-Pump
The Twin-H2V T-Bar
Formula-S Outboard Pipe
Lubricator-X Oil Cup
E-Power Premium Package
X-60R Counter-Rotation
The price for a pair
C-60 Cooling Pad for 6S LIPO
The Standard Kit will be sold without control box.
GTM-1V Gear Box
GTM-D2L Gear Box
Ultra Jet-Electric Power Kit
Twin Ultra Jet-Electric Version
Billet Exhaust Outlet Tips
The Leader-L&R Combo
AS7016/5 L&R Combo
WGT-2C Gear Box
Carbon Fiber Rail-Twin Motor Edition
M8 Collector Edition-Twin
Smart Tank-Mirror 1000
AS7818/5 L&R Combo
X30-Advance Version
The X-Partner
- Black Diamond GX58 The aerodynamically-shaped foredeck and canopy to give extra stability as well as higher speeds and exceptionally good turning capabilities, the Black Diamond GX58 will keep both gas boating newcomers and experts very happy! More
- Defender GT60 This sleekly styled Defender GT60 was inspired by world most popular catamaran Racing Boat; The Mystic C5000, The bigger hull was not only desirable to be even more impressive visually, but it is also designed to be performance as a beast in its field! More
- Formula One SX49 F1 boat racing is attracting an ever-increasing live and TV audience to watch the incredible acceleration and instant-turning performance of these outboard powered hydroplanes. Now, you can experience the incredible speed & furious by SX49 from Arrow Shark. More
- Marauder SV60 All high performance boats benefit from tuning for best results in different conditions, the top line of the fully adjustable Arrow Shark billet scale drives will help newcomers understand the dynamics of fast boating as you also enjoy the fun of experimentation, and the Marauder SV60 will provides all! More
- Specter DX58 The Specter DX58 has the most visually stunning shape of the lot! This is not a boat suited to shy or retiring personalities, it's for the gas boat owner and driver who wants to show the world that they have nothing less than the very best boat available anywhere. More
- The Pilot RX55 The Pilot RX55's performance can dominate any waterway, as the meaning of its name! Equips with Arrow Shark 2020 Ultra-Jet pump drive combined with X-30 power-plant that will offers confidence performance experience to both novice and the veteran. With its potent power-pack inside, and its sensational appearance design, the Pilot RX55 will be the boat to make any owner proud. More
- Vanquish LX55 The most classic style of Vanquish LX55 has a cockpit canopy with mesh-screened windows for superior air flowing, with the most solid material- carbon fiber for the hull made and the sophisticated designed of the scale shining hardware, this boat will always grabs attention and envious looks wherever it goes! More
- Predator XX60
- Black Diamond GX58
- Defender GT60
- Formula One SX49
- Marauder SV60
- Specter DX58
- The Pilot RX55
- Vanquish LX55
Recommend products
- Mod Props-Series
- Gear Box Series
- E-Starter Series
- Exhaust Series
The Leader-AS7516/6L
AS7016/5 Mod Prop
AS6719/3 Mod Prop
AS7517/4 Mod Prop
AS6917/4 Mod Prop
AS1470/3 Mod Prop
AS6519/4 Mod Prop
WGT-1C Gear Box
GTM-2V Gear Box
TS760-Hybrid Power Kit
Marine E-Starter V4
TS760A -Gas Car Starter
TS760-Marine Starter
Red-Fire 2" Band Muffler Pipe
Blue-Fire 3" Band SS Pipe
Black Fire-SS Pipe
Hornet D50 Outboard Pipe
DES-2X SS Muffler Kit
Mini Devil B1-SS Pipe
Building supplies.
- Drive System
- Smart Rails
- Gas Tank Kit
Scale Twin-Ram Trim Tabs
X-Pilot Extendable Rudder
Fully Adjustable T-Bar V2
CST-2H Tube Adaptor
Carb Protector V2
Smart Billet Rail-Mono Electric
Smart Billet Rail- Cat Electric
Smart Billet Rail-Jet
Smart Billet Rail-Cat30
Smart Billet Rail-Cat60
Smart Billet Rail-Mono
Smart Box-X
Smart Box-F1
Smart Servo Tray
Smart Servo Arms
Servo Tie-Bar Kit
E-Station Kit
Smart Tank-Mirror 950
Smart Tank-Mirror 1300
- Return & Exchange
- Policy & Terms
- Membership Info
- Building Instruction
- RTR Boat's Packing
- Manual Downloads
- Photo Gallery
all rights reserved ©2019-2029 Arrow Shark Inc
1-941-539-6374
Category: TFL Bare Hulls- No motor, esc or hardware.
Showing 1–12 of 23 results
TFL 51″ ARIANE CARBON RACING MONO / HOT GREEN / w/ Kevlar / Hull only no hardware, motor or esc.
TFL 1317 52″ Patron Saint RC Gas/Electric / Carbon Fiber hull with hatch.
TFL 51″ ARIANE CARBON RACING MONO / Hull only no hardware, motor or esc.
TFL 56” 1420mm Carbon Fiber Genesis Stepped Hull Cat/ Bare Hull with Hatch/ Ready-to-Rig.
TFL 56” 1420mm Genesis Stepped Hull Cat/ Bare Hull Ready-to-Rig.
Zonda – 100% all Carbon Fiber Edition/ Catamaran / Hull and Hatch Only
100% Carbon Fiber 41″Fighter Cat Hull w/ Kevlar insert
TFL 41″ Fighter Cat (1010mm) White gel coat. Bare Hull with Hatch only- No Hardware or Electronics.
Zonda Catamaran / Bare Hull Ready-to-Rig. (Painted Blue Scheme)
100% Carbon Fiber 34″Fighter Cat Hull
TFL Osprey Racing Mono Carbon Fiber w/Kevlar insert Hull and Hatch only
Ariane Racing mono /Bare Hull Ready-to-Rig.
Stay up to date with the latest releases, events, promotions and more., company info, technical support, ask our experts.
Copyright © 2024 TFL North America. All Rights Reserved.
RC Sailboats
Radio-controlled (rc) sailboats.
1. T27 RC Sloop
2. T37 RC Racing Sloop
3. T37 Racing Upgrade Racing Sloop
4. T47 Fairharbor Schooner
5. T50 Racing Sloop
6. T50 Carbon Fiber Racing Sloop
7. T52 Racing Sloop
8. T50 Trimaran
9. T65 Racing Sloop
T27 RC Sloop
- Length: 27 inches
- Sailing Weight: 4 lbs.
- Height Overall (bottom of keel to top of mast): 43.5 inches
- Kit price (standard sail colors): $375.00
- Finished : Call us at 1-360-966-3457 for availability and pricing.
Click here for more information and a shopping cart to order the T27!
T37 RC Racing Sloop
- The T37 Racing Sloop is our most popular RC boat– there are over 2,800 T37s sailing around the world. It is great fun to sail in ponds, lakes, and bodies of water anywhere!
- Length: 37 inches
- Sailing Weight: 5 lbs.
- Height Overall (bottom of keel to top of mast): 60 inches
- Kit Price (standard sail colors): $465.00
- Finished : Call us at 1-360-966-3457 for availability and pricing.
Click here for more information and a shopping cart to order the T37!
T37 Racing Upgrade RC Racing Sloop
- The T37 Racing Upgrade Racing Sloop features the beauty, elegance, and classic lines of the T37 Racing Sloop, along with innovations that make it faster, more maneuverable, and perfect for racing!
- Sailing Weight: 5 lbs
- Kit Price: $565.00
Click here for more information and a shopping cart to order the T37 Racing Upgrade!
T47 RC Fairharbor Schooner
- Length overall: 47 inches
- Height Overall (bottom of keel to top of mast): 50 inches
- Kit Price: $625.00
Click here for more information and a shopping cart to order the T47!
T50 RC Racing Sloop
- Length: 50 inches
- Height Overall (bottom of keel to top of mast): 92 inches
- Kit Price: $865.00
Click here for more information and a shopping cart to order the T50!
T50 Carbon Fiber RC Racing Sloop
- Kit Price: $895.00
Click here for more information and a shopping cart to order the T50 Carbon Fiber!
T52 RC Racing Sloop
- Fast, Fun RC sailing with this big 52 inch long RC Sailboat!
- Length: 52 inches
- Height Overall (bottom of keel to top of mast): 82 inches
- Kit Price: $560.00
Click here for more information and a shopping cart to order the T52!
T50 RC Trimaran
- Width: 50 inches
- Maximum Height Overall (bottom of keel to top of mast): 86 inches
- Kit Price: $990.00
Click here for more information and a shopping cart to order the T50 Trimaran!
T65 RC Racing Sloop
- Length: 65 inches
- Height Overall (bottom of keel to top of mast): 109 inches
- Kit Price: $1,125.00
Click here for more information and a shopping cart to order the T65!
Copyright All Rights Reserved
T37 Carbon Fiber Mast
The Carbon Fiber Mast is an optional upgrade from the standard wooden mast supplied with your T37 RC Sailboat. Both masts work equally well, but the Carbon Fiber Mast is preferred for racing your model sailboat. The benefit of the Carbon Fiber Mast is that it is stronger than the wooden mast and will not bend in strong winds like the wooden mast may.
This mast is only needed if you are purchasing a standard T37 RC Boat Kit or the Retrofit Kit for the T37 Remote Controlled Boat . The Carbon Fiber Mast is already supplied with the T37 Racing Upgrade RC Sailboat .
Related products
Tippecanoe Boats
T27 Varnish Kit
T27 wall-hanging stand, t27 table stand, replacement t27 main sail.
from $32.00
- All Categories
- Tips & Info
- Speed Calculator
We don't currently have that one in stock
Tfl zonda gt : carbonfiber: twin drive: seaking 180 : 4082 2200kv motor : artr.
TFL 41" (1040mm) Zonda Rc Boat, Twin Drive and Carbon fiber. This is the Drag Boat version of the Zonda. Built for high-speed straight-line racing with its Kevlar inlay and 4082-sized motors. To make this boat even lighter we include a 6s wiring harness, this harness allows you to run (2) 3s lipo packs that will wire the packs to run 6s to each esc. No other place is building them this way! Or you can unplug the harness and run a 6s lipo pack to each esc. What makes the OSE Zonda different? (2) Seaking 180's, see picture 4. (2) SSS 4082 V2 2200kv Motors, see picture 4. Left and Right TFL One Piece Cables (1) Set of metal 4019 Left and Right Props (4) Thru-hull water pickups, see picture 2 (new round design as of May 2024). (2) Carbon Battery Slides, see pictures 3 & 4. (1) OSE EC5 parallel esc to series battery harness, see picture 6. TFL built this boat out of carbon fiber for both super strong and very lightweight. Both are very important if you're trying to make a fast electric rc boat. This boat comes assembled with all high-quality equipment including cnc aluminum hardware. Some of the major components include, Carbon fiber hull for lightweight and super strength. Two Seaking 180 ESC's for performance and waterproof for reliability. Two TFL SSS 4082 v2 2200kv Brushless Motors for over 6 Horsepower. Adjustable twin struts for fine-tuning. Brass left and right counter-rotating propellers. ARTR (almost ready to run). It requires a servo, 2 channel radio, and batteries Requires: (1) Steering Servo (1) 2-Channel Radio System (1) Charger Batteries: (2) 3s or (2) 6s Lipo packs with EC5 connectors Hull Specs: Material: Carbon Fiber Length Tips to rudder mounting area: 41" (1040mm) Length of ridding surface: 36.5" (927mm) Width at widest point: 11.75" (299mm)
These products are recommended with items in your cart.
- RTR, ARTR & Kits
- RTR Parts & Upgrades
- Battery Packs
- Battery Charge Bags
- Battery Tester/Checker
- Battery Trays & Straps
- Bearings & Bushings
- Boots & Linkage
- Building Supplies
- Chargers & Adapters
- Connectors & Wire
- Cooling System Parts
- Cowls & Hatches
- Cowl locks/Accessories
- Decals & stickers
- ESC: Speed Controls
- ESC Accessories
- ESC Battery Eliminator Circuits (BEC)
- ESC Capacitor Bank
- Flex Cable Parts
- Flex Cable Assemblies
- Gift Certificates
- Glues, Epoxy, Resin, Fiberglass & Velcro
- GPS/Power Analyzers
- Grease & Oils
- Linkage & Boots
- Motor Mounts
- Motor Water Cooling
- Motor & Esc Combo
- Outboards & Outdrives
- Paino Wire Drives
- Propeller Adapters
- Propeller Balancers
- Propeller Nuts
- Radio Systems
- Radio Accessories
- Rudder Blades & Brackets
- Rudder Assembly
- Scale Parts
- Screws, Nuts, Bolts
- Servos & Accessories
- Shrink Wrap
- Straight Shaft Systems
- Strut & Rudder System
- Drives & Struts
- Stuffing tube & mounts
- Thrust Bearings
- Twin Motor Assembly Parts
- Water Proofing Supplies & Hatch Tape
- Water Pumps
- Clearance Items
- Featured Products
- OSE Apparel
- How to Articles
- Items by Manufacturer
- All Products
- Store search
- Terms & Conditions
- Tips on Surfing this Site
- OSE Sponsorships
 Customer services Contact us Product Catalog Special offers Help & FAQ Speed Calculator Videos Links Tips & Info OSE on Facebook © Copyright 2024 - Offshore Electrics Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
MINI-DOM Carbon Fiber Self Righting Mono RTR Rc BoatDescription. This boat has a Built-in number flag mount. People can customize and race these boats for Loads of fun! It uses a 2-channel radio with receiver (included) 2200mah 11.1 3s lipo battery (not included) and a . Some assembly required, tools provided! Recommended age: 14 and up Length: 450mm (Not including parts, Only Hull) Width: 135mm Height: 70mm Brushless Motor: VZ1515 Servo: Micro Metal Gear Radio: Oxidean 2-Channel 2.4 Required items: 3S LiPo Battery with XT60 connector (2200 mAh recommended) No refunds on used merchandise 50% restocking fee on returns or cancellations SKU: OXM-RTR-05 Customer Reviews |
IMAGES
VIDEO
COMMENTS
The T50 Carbon Fiber Racing Sloop combines the latest in lightweight strength of carbon fiber with a classic and timeless design that is as fast as it is beautiful. At 50 inches long and over six feet tall, the T50 Carbon Fiber Racing Sloop is the ultimate in RC sailing. The black carbon fiber hull is complemented by a beautiful okume mahogany ...
At 50 inches long and over six feet tall, the T50 Carbon Fiber is the ultimate in RC sailing. The black carbon fiber hull is complemented by a beautiful okume mahogany deck that stretches unbroken from the bow to the stern and adds elegance and sophistication to make the T50 Carbon Fiber Racing Sloop an outstanding boat both in the water and on ...
WORLD FAMOUS competition RC HULLS and HARDWARE. ... View All. 32cc Rear Universal Motor Mount. $ 25.00 USD. Carbon Fiber G4 - GX5 - G6 Inspection cover. $ 35.00 USD. Dagger Turn Fin. $ 40.00 USD. FE 30 Sport Hydro Hardware Kit. $ 130.00 USD. Get Straight onto the water ... We are a manufacturer of radio controlled hyperformance boat hulls and ...
TFL 51″ ARIANE RACING MONO 100% CARBON FIBER ARTR W/Full carbon kevlar insert deck and hull. Twin 5694/1000KV V-2 motors and 300amp ESC's/Thru Hull cooling. $ 2,698.00. Add to cart. TFL 51″ ARIANE RACING MONO Fiberglass ARTR W/Full carbon kevlar insert deck and hull. Twin 56mm motors and Twin 300amp ESC's/Thru Hull cooling. $ 2,298.00.
2024 DOMINATOR Mono RTR RC Boat - Carbon/Kevlar. $1,099.00. 2024 DOMINATOR Mono RTR RC Boat - Black Carbon. $999.00. 2024 Self Righting DOMINATOR Mono RTR RC Boat - Carbon/Kevlar. $1,199.00. 2024 Self Righting DOMINATOR Mono RTR RC Boat - Black Carbon. $1,149.00. OXI-DIGGER RTR Wooden Rigger RC Boat.
The T50 Racing Sloop is the ultimate in RC sailing. Built exclusively for speed and performance, her 50 inch hull is the perfect combination of slender beauty linked with the power of a six foot mast and 1200 square inches of sail area. ... Carbon fiber mast and booms; 3/4 oz. nylon spinnaker cloth pre-sewn sails; Marine-grade epoxy, along with ...
This is a quick look on a new RC Sailboat we build out of Carbon Fiber with Printed tooling and CNC molded partshttps://www.r-g.de/list/Harze leave them a no...
Description. Oxidean Marine THE ANIMAL CAT II E (AC2E) Twin Cat Ready-To-Run R/C Boat. Double-Thick Carbon Fiber Hull. Length: 38" (965mm) Width: 11.5" (292mm) Motors: 2X Brushless Oxidean Marine 4082 1650kV OR 2200kV 6-Pole. ESC: Twin Oxidean Marine WP 6BL200 200A Waterproof Brushless ESC.
The carbon fiber T50MOD is beautiful and fast, strong and light. It will give you and your family generations of sailing fun! Kit $825.00. Substitute mylar sails (shown in the sailing pictures above) in place of the standard nylon spinnaker cloth sails for $965.00 as a kit. T50 Lakeside/Floor Stand $51.
TFL Cheetah RC Boat: Carbon Fiber Twin Motor ARTR (Almost Ready to Run) Just like a Cheetah, TFL has designed this hull to be both fast and agile around corners. All pieces are either carbon fiber or aluminum to withstand the force at such high speeds. With the right setup and tuning, this setup can reach speeds close to 70mph.
RC Model Sailboat Builds. By Mark Borg. I have been using WEST SYSTEM® Epoxy for over 20 years. Over that time my projects have included building carbon fiber bikes and an amphibious robot to test my autonomous navigation software for my PhD in Robotics. Most recently, however, I built RC scale models of the 1995 America's Cup winner Black ...
Equips with Arrow Shark 2020 Ultra-Jet pump drive combined with X-30 power-plant that will offers confidence performance experience to both novice and the veteran. With its potent power-pack inside, and its sensational appearance design, the Pilot RX55 will be the boat to make any owner proud. The most classic style of Vanquish LX55 has a ...
How to Choose a Remote Control Boat; The TFL North America Promise; Dealer inquiries ... TFL 1317 52″ Patron Saint RC Gas/Electric / Carbon Fiber hull with hatch. $ 1,489.89. Add to cart. TFL 51″ ARIANE CARBON RACING MONO / Hull only no hardware, motor or esc. $ 1,200.00. Add to cart. TFL 56" 1420mm Carbon Fiber Genesis Stepped Hull Cat ...
T50 Carbon Fiber RC Racing Sloop. Length: 50 inches; Height Overall (bottom of keel to top of mast): 92 inches; ... T52 RC Racing Sloop. Fast, Fun RC sailing with this big 52 inch long RC Sailboat! Length: 52 inches; Height Overall (bottom of keel to top of mast): 82 inches; Kit Price: $560.00; Finished: Call us at 1-360-966-3457 for ...
T37 Carbon Fiber Mast. Tippecanoe Boats. Quantity. $17.50 USD. The Carbon Fiber Mast is an optional upgrade from the standard wooden mast supplied with your T37 RC Sailboat. Both masts work equally well, but the Carbon Fiber Mast is preferred for racing your model sailboat. The benefit of the Carbon Fiber Mast is that it is stronger than the ...
TFL 41" (1040mm) Zonda Rc Boat, Twin Drive and Carbon fiber. This is the Drag Boat version of the Zonda. Built for high-speed straight-line racing with its Kevlar inlay and 4082-sized motors. To make this boat even lighter we include a 6s wiring harness, this harness allows you to run (2) 3s lipo packs that will wire the packs to run 6s to each ...
carbon fiber water cooled brushless Suitable B36 540 motor mount rc boat 1059. $25.64. Was: $26.99. or Best Offer. $3.50 shipping. Vintage Remote Control ONLY 27 RC Car Truck Toy New Bright 1991 Works! G6D354. $20.69.
He has combined all of his expertise into all Oxidean Marine products to bring you the very best equipment available. Our goal is to give the user the highest quality for the most affordable price possible. Bill Oxidean has broken over 100 Straight line (SAW) Speed records and won over 50 national titles.
This is how I make my masts for my 12mR rc sailboats. 97 inch long. 2.47 meters.
Moulding a carbon fibre RC boat from a 3D printed master, using resin infusion.If you enjoyed this video the please subscribe or even better buy me a beer h...
IOM Spreaders - Carbon Fiber (NEW) - Sailboat RC poduction
Carbon Fiber Hull and Hardware Length: 45" (1143mm) Width: 12" (304mm) Motor mounts installed Outdrives steering Steering servo (Standard) Drive shafts Props Everything you need minus Motors, ESCs, and Radio. Graphics sold separately Introducing the Beast 45inch Twin Cat! If you liked the Animal you will Love this super stable platform! 8s Full carbon fiber hull Rudder and shafts are unbolted ...
The competitive sailing boat industry uses carbon fibre for high-performance purposes. Nevertheless, this material is known to cause environmental issues during its manufacturing. We can currently observe, based on the literature, difficulty integrating a reliable, justified, and transparent inventory of carbon-fibre production for LCA applications of high-performance composite materials.
Its Finally here! The Oxidean Marine Mini-Dom! This fun 17 inch Full carbon fiber rc boat is Loads of fun, and best of all, Self righting! that's right! If you happen to capsize the boat, a unique chamber floods with water, sets her right side up again, and Away you go! This boat has a Built-in number flag mount. People can customize and race these boats for Loads of fun! It uses a 2-channel ...