fastest foiling sailboat

• Yachting World
• Digital Edition

Fastest sailboats: The teams aiming to break 80 knots

• April 6, 2022

It's been nearly a decade since Sailrocket set a new record to become the world's fastest sailboat. Now two teams are hoping to set a new record with their radical designs, Mark Chisnell reports

On 24 November 2012, Paul Larsen and his Sailrocket team rewrote our understanding of the physics of sailboats, stamping their names indelibly in the record books as they set a new record for the world’s fastest sailboat.

A little over a week earlier, at a spot called Walvis Bay on the coast of Namibia, Sailrocket 2 had pushed the outright sailing speed record up by the biggest-ever margin – from 55.65 to 59.23 knots. The performance on the 24th smashed it beyond all expectations though, a gloriously windy day that saw Sailrocket 2 deliver a 65.45 knot average officially becoming the world’s fastest sailboat.

It was a remarkable human achievement, piloting a boat down a 500m course at speeds that had previously been thought impossible. “Your job is to go 100% down that course, there’s no halfway about it,” Paul Larsen told me, almost a decade later. “By the time you’ve got a big team and all the momentum of that project going, your biggest fear is not going fast.”

The risks are inescapable though, as Larsen had revealed in a blog; “As I lay awake in bed that morning I considered writing a little note that I hoped would never be read and stashing it somewhere. Too morbid. Just get it right, Larsen.”

Growth of the world’s fastest sailboat

To put Sailrocket’s performance into context you need to consider the trajectory and history of the sailing speed record . It started back in 1972 with Tim Colman and Crossbow setting an opening mark of 26.30 knots.

Yellow Pages in 1993. Photo: Frederick Clement/DPPI Media/Alamy

By 1993, Yellow Pages had upped that all the way to 46.52 knots – an average improvement of almost a knot every year. But then something changes, progress halts for over a decade. The windsurfers and kiteboarders eventually start nudging it back up, but it’s 16 years before another yacht – Alain Thebault’s foil-borne L’Hydroptère – sets a new record, not even five knots quicker than Yellow Pages .

It was thought that the speed of sailing machines was reaching a ceiling, a physical limit defined by the cavitation point. If you have ever made a cup of tea at altitude then you will know that the boiling point (the transformation point where water changes from a liquid into a vapour), varies with pressure. The lower the pressure, the lower the temperature required for water to boil. So, at the top of Everest, water will boil at about 68°C.

There’s also low pressure on the leeward side of an aero- or hydrofoil . Foils provide a lifting force because of the pressure difference between one side and the other. This difference creates the force as the foil tries to equalise the pressure.

L’Hydroptère claimed the record in 2009. Photo: Christophe Launay

If a hydrofoil goes fast enough then the pressure to leeward will drop sufficiently that the water starts to ‘boil’ or vaporise. This creates a loss of lift, and instability as smooth flow turns chaotic, with vapour bubbles flowing down the foil to an area of higher pressure where they collapse.

It’s this speed limit that we see America’s Cup and SailGP foilers hit on a reach. Once the speed gets much above 50 knots the foils – which are designed to suppress cavitation for as long as possible – finally start to cavitate and the boats just can’t go any faster.

To get past this point a completely different type of foil is required, one that does not try to eliminate cavitation but instead tries to stabilise it, and this is the secret to the 65-knot speed of Sailrocket 2 . “That’s the brilliant [foil] design that we settled on, with a lot of help from guys like Aerotrope and Chris Hornzee-Jones. Chris did amazing work behind the scenes on that project, including designing the final foils,” said Larsen.

Article continues below…

Syroco: Radical design aiming to set a new speed record

If having a top-flight speed sailor as a part of your team taking on the challenge of creating the world’s…

SP80: Swiss team hoping to build the fastest sailboat

SP80 was conceived by three graduates of Swiss engineering school, École Polytechnique Fédérale de Lausanne; Benoît Gaudiot, Xavier Lepercq and…

Sailrocket obliterates world record….again

Matthew Sheahan talks to Paul Larsen shortly after he exceeds 65 knots, shattering his own world record

The team realised the foil didn’t need to be impossibly thin to suppress and avoid cavitation. Instead, they could encourage it and push past the cavitation point with a foil that would cavitate in a stable fashion.

“To make a dinghy or a powerboat analogy, it’s like when you get over that hump and the boat gets up on the plane. We all know when the water separates off the back of the boat, you don’t want your transom gurgling around at the back there with all that drag,” Larsen explains.

Current speed record holders Paul Larsen and Vestas Sailrocket 2. Photo: Vestas SailRocket

In a similar fashion, Sailrocket 2 ’s foil is able to shed the turbulent, draggy flow of early cavitation and replace it with a single smooth pocket of vapour around the foil as air sucks down from the surface. Larsen calls this a base ventilated foil, it’s also sometimes termed a super-ventilating foil.

“So you end up with these very shallow camber, base ventilated foils, and they’re not overly efficient but they don’t have a limit,” he explained. “They keep working. It’s like a jet fighter’s wings. They’re not efficient, but if you put a big jet engine behind them, they keep going where the others stop and hit the ceiling.”

Force alignment

The jet engine was the other part of the problem. How do you generate enough power from the aerofoil to push a horribly inefficient hydrofoil up to the speeds required to start cavitation, and then blow through that barrier?

The answer lay in a decades-old idea – force alignment. In conventional sailboats, be they dinghies, multihulls or yachts, the aerodynamic force created by the sails is both pushing the boat forward and pushing it over.

The force is resisted by a combination of a hydrodynamic force from a foil in the water, and weight – either the crew’s bodyweight or the weight of a keel. These two forces act at a distance from the centre of effort of the sail – creating opposing levers, with the forces of mass and hydrodynamic lift opposing the aerodynamic force generated by the sail (or wingsail).

The use of these forces to create a propulsive forward force demands a structure of a commensurate size and strength. So to go faster required more force and/or lighter overall weight, but also stronger structures. It was big improvements in the strength and weight characteristics of materials that allowed much of the jumps in speeds set through the 1970s, 80s and 90s.

Vestas Sailrocket 2 used force alignment to achieve her remarkable speeds

But there was another way: by offsetting the forces and aligning them. “So [you] have the centre of effort of the aerodynamic forces, the sail or the wing, directly aligned with the opposing force of the foil,” explains Larsen. In other words, remove the levers by having the force from the sail directly oppose the force from the hydrofoil.

“We didn’t come up with that concept, that was written about in the 1960s by Bernard Smith in the book The 40-Knot Sailboat ,” Larsen adds. Smith’s insights were so far ahead of his time that it took almost five decades for them to be fully realised in Sailrocket 2’s record.

Sailrocket 2 achieved the force alignment with a wing mounted on the leeward hull that was canted over the windward hull by 30°. The force it generated was driving the boat forward and trying to lift the windward hull out of the water.

This force was resisted by a foil under the windward hull. And so that foil was pulling down rather than pushing up. It’s a crucial distinction between Sailrocket 2 and the type of foiling craft used in the America’s Cup or SailGP. In those boats, it’s the leeward hydrofoil that pushes back against the sail force. It also lifts the whole boat up and out of the water.

These two breakthrough ideas – force alignment and super-ventilated foils – along with a ‘no guts, no glory’ attitude, took Larsen and his Sailrocket 2 team over 65 knots, a mark that has been held for almost a decade. But might the time have come for that record to be broken?

“I think we’ve sat on it for long enough and it’s definitely time for it to be challenged,” Larsen says. “There was a time I was quite protective and proud of it, and wanted to sit on that throne for a while. But right now I want to see what other people can do with it and see what their solutions might be. I’ll see if it motivates me enough to get back out there myself!”

New fastest sailboat challengers

There are two major challenges shaping up to take on the Sailrocket team’s record and both should take to the water later this year or early in 2023. One of them, Syroco , has been set up by Alex Caizergues, the first man to travel sail-powered at over 100km/h on water, and twice holder of the outright sailing speed record on his kiteboard. The other, SP80 , has come out of the Swiss engineering school École Polytechnique Fédérale de Lausanne (EPFL).

Kite-powered SP80 challenge uses a super-ventilating surface piercing foil. Photo: SP80

Both are using the principles that Larsen established, and both teams think they won’t just break the record but will smash it. Syroco ’s stated target is 150km/h, a breathtaking 80.99 knots. SP80 is also chasing the 80-knot barrier.

“I actually like where both projects are aiming,” said Larsen. “They’re definitely using the force alignment concept.” Both the SP80 and Syroco teams will use a kite, aligning its aerodynamic force with the hydrodynamic force from a foil. This should allow the generation of an immense drive force on a relatively light structure. They will need all the power they can get to push through the cavitation point.

The SP80 project is also using a super-ventilating, surface piercing foil like Sailrocket’s. “Vestas Sailrocket and the work done by Paul Larsen and his team was the main source of inspiration that we used to develop the boat,” said Benoît Gaudiot, one of the three founders of SP80 .

They started throwing around ideas in 2017, building super-ventilated fins for a kiteboard. Gaudiot, an experience kitespeed sailor quickly got it to 41 knots. They were going to need a different approach to beat the record though.

“The body cannot handle the power that is required to reach more than 60 knots,” said Gaudiot.

SP80 co-founders Xavier Lepercq, Mayeul van den Broek and Benoît Gaudiot. Photo: SP80

Another of the founders, Xavier Lepercq, built a simulation tool, and they started developing designs. What they came up with was a trimaran powered by a kite, whose aligned force was balanced by a surface-piercing foil.

Once this was formulated the team quickly grew, with EPFL pledging its support and sponsors coming on board. “In the team, we have six full-time employees and almost 40 students from EPFL,” explained Mayeul van den Broek, the team’s project manager. They tested a prototype on Lake Geneva in 2020 and in June 2021 began construction of the full-size craft at Persico Marine.

The transition to a kite means that the biggest challenge to both teams is control – accurately balancing the aero and hydrodynamic forces. SP80 has tackled it with what they call the ‘power module’. “The idea behind this is to balance the force. The way we designed the boat, the main thing to achieve was stability,” said Gaudiot.

The exact mechanism of the power module is confidential, but it’s visible at the back of the boat in their visualisations and animations. It provides a direct link between the kite and the hydrofoil and appears to ‘trim’ the hydrofoil depending on the force vector coming from the kite. The shape of the foil and the linkage to the power module are key to the flight stability of the craft.

Swiss SP80 team has been testing its prototype on Lake Geneva. Photo: SP80

“It’s fully mechanical and it’s fully adjusting the balance by itself,” said Gaudiot. “The controls will be quite simple for the pilot. There will be no need for me to control the height, the elevation of the boat, just the direction. And the power of the kite.” The kite lines will run to the cockpit and be controlled with the hands, while the direction of the boat will be controlled with the feet.

The SP80 team plan to challenge the record from a base in the south of France early in 2023, and Paul Larsen is looking forward to it. “I think the SP80 is a more practical solution that has made compromises for practicality. And I think I can get my head around that one a bit more. I think SP80 is probably closer to getting results. And I want to see how a kite’s going to go against the [Sailrocket] wing, because historically wings are faster.”

Flight on water

Looking to spoil the Swiss party is Syroco , a French company that comes to the world sailing speed record with gold-plated credentials. Co-founder and CEO Alex Caizergues has already held the record on his kiteboard.

“Since Paul broke the sailing speed record, I knew that we had to change the software and the way to go fast on water. I knew that I had to assemble around me a team of people able to build this kind of craft,” Caizergues recalls.

Caizergues isn’t just an athlete, he’s a business school graduate with an entrepreneurial track record. Syroco was set up in 2019 with four co-founders and support from technology entrepreneurs and venture capitalists.

Artist’s rendering of how the Syroco craft will look in action. Photo: Syroco

They want to do more than just break the record, building a technology business around the attempt. The team has about 15 people working in Marseille with specialists in fluid mechanics, structures, software and data analytics.

“Our l’aile d’eau concept… it’s a little bit like Sailrocket,” said Caizergues. The concept is very simple; a hydrofoil will ‘fly’ underwater, pulled along by a cable that’s connected to a kite flying in the air above it.

Suspended between the two is a capsule containing the pilot Alex Caizergues, and a co-pilot. The aero and hydrodynamic forces oppose each other in an almost perfect representation of the aligned forces concept that powered Sailrocket 2 .

It should have the greatest speed potential because there is nothing extraneous. The capsule is only there because both the aero and hydrodynamic wings must be controlled, and the forces balanced by the pilots (not automated).

The Syroco prototype under test being towed by a RIB. Photo: Syroco

And that’s the tough part, controlling it, particularly keeping the foil in the water. “Nope,” responds Alex, quickly, when I mention this possibility. “The foil never goes out of the water.” The Syroco foil isn’t surface piercing, it runs below the surface, only connected to the capsule and the kite by a cable.

It doesn’t rely on dragging air from the surface to stabilise the cavitation around the foil. Instead, it will rely on the cavitation creating its own stable pocket of water vapour around the foil – this is called super-cavitation. When it occurs the water flows around the bubble of vapour as though it were a solid, significantly enhancing the performance of the foil – as long as the bubble remains stable.

The problem is keeping the bubble intact. Paul Larsen pointed out that the cable gives the air a pathway down to the super-cavitating foil. “How they’re going to stop air sucking down from the surface and rupturing the bubble, that’s the real trick. It’s a very dynamic problem to solve. It’ll be interesting to see how well their simulations live up to the reality of what they’re about to strap themselves into…”

The control mechanisms for the final craft are still being worked on, but they have flown a prototype, towed by a RIB rigged with a 5m-high mast that simulated the force from the kite. The team hopes to commit to a final design with construction starting in the spring.

Human element

And then of course, there will be the matter of executing the plan on the day. “If you’ve done your maths, you’ve done your engineering, you’ve been thorough, that gives you confidence when you stand up on top of that course on one of those big days and you’re not exactly sure what’s about to happen,” recalls Larsen.

Kiteboarder and businessman Alex Caizergues leads the Syroco project. Photo: Syroco

“You know it’s probably just slightly above your top wind range but all the cameras are rolling and the drones are in the air and everyone’s waiting with their stopwatches. That gives you the confidence to say: ‘Yeah, I’m going to go and wring its neck.’”

“Any crashes I had [and there were several] usually all the systems I had in place [for safety] were still completely locked on among all the wreckage. You’d go and flick off that lever you were going to use to control something – because by the time you’ve realised what’s happening, it’s happened.”

“If we go again with Sailrocket, then safety will feature bigger. I wouldn’t get in that boat and go that speed again. We got away with it because we had to.”

“Safety is really important for us,” agrees Benoît Gaudiot. They have built a kevlar cockpit for protection, installed a six-point harness and an F1-inspired seat. Gaudiot will wear a helmet with oxygen that will switch on if the helmet detects water in contact with its mask. “I would be able to stay in the water for a few minutes to have a diver come and open it.”

“The critical point on the boat is the hydrofoil. If the hydrofoil breaks, the boat…” Van den Broek interjects. “…will take off,” Gaudiot finishes the sentence for him.

Their enthusiasm for the project is infectious, the words tumbling out. And no one wants the boat to take off. One big advantage that they have that Larsen did not, is that they can release the power source. “With a kite it’s a few lines and you can just cut it super-fast,” says Gaudiot. “You can do it by yourself. You can do it from a distance, from the chase boat. You can do it automatically.”

“I think both those guys [Caizergues and Gaudiot], they’ve got the mentality,” said Larsen. “They’re not going to get up there and be scared of what they’re doing or intimidated too much by the craft.”

And what if they do break the record that Paul Larsen and his team have owned for almost a decade?

“We opened the door on a whole new world full of potential. And so there is a part of me that’s curious as to what lies further down that path. We validated the concepts that could get above what people thought were the cavitation limits and the ceilings of speed sailing. We proved you could get beyond that. They can take you to new levels of physics.

“The boat [ Sailrocket 2 ] is sitting there in perfect shape. It was made to last forever… we could rig that thing up and do 65 knots in a week or two.” And if his record goes, I wouldn’t put it past him to dust her off and do just that.

If you enjoyed this….

Yachting World is the world’s leading magazine for bluewater cruisers and offshore sailors. Every month we have inspirational adventures and practical features to help you realise your sailing dreams. Build your knowledge with a subscription delivered to your door. See our latest offers and save at least 30% off the cover price.

• Subscribe Now
• Digital Editions

Best hydrofoil boats: 6 of the most spectacular foiling motorboats money can buy

• Electric boats
• Top stories

Foiling technology has really taken off in the past few years. We pick out 6 of the best hydrofoil boats you can buy right now…

With its roots in the 19th century, foiling technology is as old as the hills, but in the past five years we’ve noticed an explosion of hydrofoil boats coming onto the market.

In part inspired by the foiling raceboats of the America’s Cup , the popularity of foiling is easy to understand – fuel efficiency gains are substantial, noise is almost eliminated (particularly if your foiling boat also happens to be an electric boat ) and they look as cool as a snowman in a freezer!

To help you understand the dizzying array of foiling boats available right now, we’ve put together the following guide to what we think are the most promising designs out there.

6 of the best hydrofoil boats

SEAir foiling RIB

Founded in 2016, French yard SEAir builds foiling RIBs, having been inspired by the speed of foiling racing yachts.

We tested their 5.5m model back in 2018 and since then they have expanded their range to cover superyacht chase boats, commercial and military vessels.

Our tester recorded a top speed of 32 knots, with the foils doing their best work at around 20 knots, but SEAir claims that 42 knots is possible in the right conditions.

Read more about the SEAir foiling RIB

Article continues below…

Spirit Yachts launches spectacular long-range electric flying boat

Bmw launches new icon electric boat at cannes film festival.

The Cannes Film Festival has seen the launch of the new ICON electric boat. Created by BMW in collaboration with

A dual helm set-up allows the boat to be piloted from the bow or the cockpit. Photo: Guillaume Plisson

Enata Foiler

Dubai-based Enata Marine added a healthy dose of glamour to the world of foiling boats in 2018 with the launch of its Foiler.

In addition to a superyacht tender-worthy exterior, this 32fter includes a bow window for spectacular views while underway.

A 40-knot top speed and a 190nm range makes this a very appealing option, although the premium price tag of $938,000 may put some off.

Read more about the Enata Foiler

Princess R35

When British boatbuilding giant Princess Yachts got in on the foiling boat game in 2019 with a 35ft carbon-fibre dayboat, we knew that things had really taken off.

While the foil-assisted R35 may not have the spectacular cruising-above-the-waves appeal of some other foiling boats, it is highly efficient, beautifully designed (in collaboration with Pininfarina) and handles like nothing else we’ve ever driven.

In our review, we praised its rare combination of agility, refinement and stability, with spray kept in check impressively at high speeds.

Read more about the Princess R35

The foiling Candela C-8 is the first boat to use Candela’s proprietary C-POD, but bigger craft will follow later

Candela C-8

Swedish firm Candela burst onto the scene in 2021 with its debut, the Candela C-7 , which was billed as the world’s first electric foiling boat, but it was the 2022 launch of the Candela C-8 that really moved the game on.

Available with a 69kWh battery, adapted from the Polestar 2 electric car, owners can expect a range of 57nm at 22 knots, more than enough for dayboat use.

The consumption figures are truly staggering, with Candela’s figures suggesting that the C-8 is more than 12x more efficient than an equivalent 300hp outboard powered sportsboat.

Read more about the Candela C-8

The electric Iguana is capable of three knots on the land and 30 knots at sea

Iguana Foiler

Not content with being at the forefront of the amphibious boats market with its caterpillar-track offering, French yard Iguana has set its sights on the world of foiling too.

Announced last year, the Iguana Foiler will be powered by the world’s most powerful electric outboard engine, the 300hp Evoy Storm .

Having tested both the engine and the boat separately, we can’t wait to see the result when they come together with the added advantages of foiling technology. Watch this space…

Read more about the Iguana Foiler

The foils lift up at slow speeds to reduce the draft

Mantaray M24

Another exciting model in the hydrofoil boats pipeline, this 24ft runabout is particularly interesting is its simplicity. Unlike its main foiling rival, the Candela C-7, the Mantaray M24 requires no complicated electronics to ‘fly’.

Instead it uses the builder’s patented mechanical hydrofoil system, which it has trademarked as Dynamic Wing Technology or DWT. The technology is said to be the result of ten years’ development work and uses a retractable T-foil in the bow and H-foil amidships that self-stabilise mechanically.

This allows it to lean naturally into corners and ride serenely over waves without relying on a network of sensors and algorithms to monitor and adjust the foils. If it proves effective this could drastically reduce the cost and complexity of foiling boats, while simultaneously increasing reliability.

Read more about the Mantaray M24

It doesn’t end here, with fascinating one-off projects from Spirit Yachts and BMW on the water, it’s clear that foiling has a huge potential for transforming the world of boating.

Read more about hydrofoil technology

Toy of the month: The ‘motorbike for the sea’ inspired by James Bond

Absolute navetta gets a snazzy new makeover, fjord 39 tour: maximised space and amenities, latest videos, bluegame bgm75 sea trial: the €6.8m powercat that thinks its a monohull, cormate chase 32 tour: fast, stylish and practical weekender, axopar 29 sea trial: sun top vs cross cabin – which is best, sunseeker ocean 182 – see how this compact superyacht copes in a wet and windy sea trial.

How SailGP’s foiling F50 catamarans sail so much faster than the wind

Arguably the most technologically advanced sailboats on the planet right now, the one-design SailGP F50 foiling catamarans are capable of breathtaking speeds – at times, reaching four times the velocity of the wind that drives them. But how do they do it?

Beating the balloon

Bending the laws of physics

Faster and faster

Beneath The Surface

Watch on youtube.

Access All Areas

Want to learn more about SailGP?

Meet the denmark sailgp team, find all the latest news, go beneath the surface of sailgp, sailing terms, go beneath the surface.

How the world’s fastest sail racing boats fly above the water

Tune in to SailGP’s landmark Season 2 opener in Bermuda at the end of the month, and you’d be forgiven for thinking that your eyes are deceiving you.

The Beneath The Surface show

We go Beneath The Surface of SailGP's iconic host cities, set a spotlight on great projects and curious mind and catch all the lastest with the Denmark SailGP Team. Join us as we travel the world and explore how innovation and science is helping solve the world's biggest challenges!

This is how SailGP's NASA-inspired wings make the F50 boats fly

Some may say the foils, which help the boats to fly above the water. Others may claim it’s the platform – that’s the two, catamaran hulls and the trampoline that connects them.

ROCKWOOL Denmark SailGP Team

The official home of the ROCKWOOL Denmark SailGP Team. Meet the team, read all the latest stories and explore a world of exciting content.

ROCKWOOL Group

F1x A-class foiling catamaran

World champion, lighter = better, craftsmanship, meet the foiling f1x a-class catamaran.

This is the ultimate singlehanded foiling catamaran of the moment: ultramodern, incredibly fast, very agile, extremely strong and feather-light, in an aerodynamic and ergonomic design. The perfect total package, packed in 1 foiling catamaran. This is the world’s coolest boat for singlehanded races and the winner of several A-cat world championships and many other sailing races.

The 2020-F1x A-cat is exactly the same foiling catamaran that made Mischa Heemskerk Vice-World Champion at the Herveybay Worlds 2018 in Australia and World Champion at Weymouth 2019. All our foiling F1x A-class catamarans come straight, ready to race and ‘Mischa-tuned’ from our factory.

Unique design enables top performances

The F1x A-class foiling catamaran is the ultimate reflection of our current design language. The aerodynamic design accentuates the performance qualities of this super fast foiling racing boat. The sophisticated deck plan provides clear control and minimal air resistance.

Foils The rudders and daggerboard foils used on the F1x A-class foiling catamarans are produced with the highest quality carbon pre-preg fibers. The foils are cured in our own Autoclave . Our winning foil design was created in close cooperation with Glenn Ashby and the designers of AC Team New Zealand .

Construction The F1x A-cat is manufactured entirely according to the carbon pre-preg/ Nomex production method, and cured in our Autoclave. This technology is the same as used in the aerospace industry and within other foiling boats like for example, the America’s Cup.

Design The design of the F1x foiling A-class catamaran was completely conceived by the DNA design team and made at DNA’s own yard. In the DNA design team Pieterjan Dwarshuis, Mischa Heemskerk and the renowned Dutch industrial design engineer Rudo Enserink worked closely together to create the perfect foiling A-class catamaran.

We build your new foiling boat!

Technical details.

The F1x A-class foiling catamaran has a number of unique features that improve performance. For example:

• Semi ridged trampoline. Gives extra torsional stiffness to the boat and increases its aerodynamic characteristics.
• Patented main-sheet-wheel-system. For more direct and faster trim of the main sail.
• Aerodynamically placed traveller car.
• Flexible daggerboard casings. For minimal water absorption in floating mode.
• Aerodynamically shaped ‘beams’.
• Adjustable T-rudders. Foiling with rudder differential is possible.

Specifications

LOA: 5.49 m BOA: 2.30 m Max. draught: 1.20 m Sail area: 13.94 m Total weight: ca. 53 kg Top speed: 31 kn Extra: All measurements according to IACA Class regulations.

Buy a champion's boat!

Are you excited to buy a F1x A-class foiling catamaran from DNA Performance Sailing? Please fill in our contact form:

Yes, I want a F1x A-cat!

Schrijf je in voor onze nieuwsbrief en blijf op de hoogte van de nieuwste ontwikkelingen.

Contactformulier

• Company Name
• Full name * First Last
• Emailaddress *
• Phonenumber *
• Mijn vraag betreft * My question: TF10 F1x G4 F4 Custom Parts Hydrofoils Other
• Comments This field is for validation purposes and should be left unchanged.

Registrieren Sie sich für unseren Newsletter

lassen Sie sich über die neuesten Entwicklungen informieren!

• E-Mail-Adresse *
• Phone This field is for validation purposes and should be left unchanged.

Schrijf je in voor onze nieuwsbrief

blijf op de hoogte van de nieuwste ontwikkelingen!

• First name *
• Last name *

Wij gebruiken cookies om u de beste online ervaring te bieden. Door akkoord te gaan, accepteert u het gebruik van cookies in overeenstemming met ons cookiebeleid.

Wanneer u een website bezoekt, kan deze informatie in uw browser opslaan of ophalen, meestal in de vorm van cookies. Beheer hier uw persoonlijke cookiediensten.

• wordpress_test_cookie
• wordpress_logged_in_
• wordpress_sec

• AROUND THE SAILING WORLD
• BOAT OF THE YEAR
• Email Newsletters
• America’s Cup
• St. Petersburg
• Caribbean Championship
• Boating Safety

Boat of the Year 2020 F101: Best Foiler

• By Dave Reed
• Updated: December 10, 2019

At A Glance

Price As Sailed: $24,750

Design Purpose: Learn to foil, advance skills

Crew List: One or two

Rob Andrews and his ­business partner Alan Hillman have been teaching foiling for a few years now, and one thing they’ve learned is we get better by sailing, not by swimming. Thus was the genesis of the F101, a craft with which they could teach the fundamentals of foiling—without the crash and burn. But it’s not just a learn-to-foil boat, either. It’s a platform with which new and experienced converts alike can take their ­foiling skill set to a higher level.

The key to mastering the F101, Andrews explains, is grasping righting moment. With the trimaran platform, you get plenty of it, as well as a stable boat that’s more forgiving than any other small foiler. “The trimaran configuration gives you righting moment direct from the foil in the middle hull,” he says, “and gives a measure of safety. It’s hard to capsize the boat.”

The judges learn as much when it comes time to sail the F101. In 15 knots and more, and a steep Chesapeake chop, Powlison is first to give it a go. He settles into the boat, gets his bearings, perches skittishly on the weather hull, sheets on the mainsail (no need to use the boat’s gennaker above 12 knots) and off he goes like a bat out of hell, popping up on the foils without even trying.

“The trick is getting used to the sensation of heeling to windward,” he says. “It takes a bit of trust. Once foiling, it’s quiet and fast, and I felt like I had to be really active on the mainsheet to keep it on the foils.”

That’s true of any foiler, but the beauty of the F101, the judges agree, is when you do lose it, it’s no big deal. The boat drops off its foils, the bows auger in and you get a face full of water; but just reset, bear away and try again.

“The hull shape picks up the buoyancy gently,” Stewart says, “which makes it depress smoothly and prevents it from pitchpoling. When I dumped it a few times I thought I was going in, but not a chance. You quickly realize there’s plenty of floatation there to save you. In flat water, with one day of training you’d get up to speed quickly.”

When teaching people to foil, Hillman starts with “skimming,” a ride height barely above the surface. As the sailor becomes more accustomed to how the boat behaves, there’s a simple line adjustment at the foil head: Dial it up one setting and increase your ride height.

As you’re sailing, the foil wand hanging behind the trailing edge effectively feels where the boat is riding relative to the water and actuates the main flap. In light winds, it gives you more lift, and the boat pops up on the foil. Get too high, and the wand drops down even ­further, forcing negative lift on the flap, which brings you back down to your desired height and prevents the foils from breaking the surface.

In terms of construction, the judges praise its carbon-and-epoxy build quality and the all-up weight of 180 pounds, which makes it easy to get to and from the water. With the F101 sitting on its dolly in the boat park, going sailing is as simple as pulling back the covers, hoisting the main and launching from a dock, beach or boat ramp with minimal fuss.

“What I like about it is that it’s one of those boats that you buy and don’t need to add anything to it,” Allen says. “There’s ­nothing to change out or upgrade.”

For simplicity, the boat is set up with adjustments that let you ratchet up the experience as you climb the learning curve. On the rudder foil, for example, there is a clear numbering system so that as you twist the tiller extension, you change the rudder rake. The baseline setting is zero, and it’s the same for the main foil. The only thing left is to balance the forces with the mainsheet.

“When I first got up on the foils, I was thinking to myself, ‘This is too easy; I should be working harder,’ ” Powlison says. “As they said, this boat solves a lot of the problems associated with other foiling dinghies. It’s a great high-performance boat that represents the next step in making foiling accessible to the public.”

See All Winners

Other Winners:

• 2020 Boat of the Year
• Best Crossover
• Best Multihull
• Best Foiler
• Best Dinghy
• More: BOTY , boty 2020 , foils , Sailboats
• More Sailboats

Nautor Swan Has A New Pocket Rocket

Pogo Launches its Latest Coastal Rocket

A Deeper Dive Into the Storm 18

2024 Boat of the Year Best Recreational Racer: Z24

Black Foils Pad Season Lead with SailGP New York Win

Widnall Prize Announced for Helly Hansen Sailing World Regatta at Marblehead Race Week

Reproofing May Be Required

Sagamore Ridealong in Chicago

• Digital Edition
• Customer Service
• Privacy Policy
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding